Reference10:PBX/Objects/Session Border: Difference between revisions
Jump to navigation
Jump to search
(New page: A Session Border object provides the session border functionality for a single device, which is that the device can register to this object and the object establishes the registration to a...) |
(No difference)
|
Revision as of 18:20, 20 September 2012
A Session Border object provides the session border functionality for a single device, which is that the device can register to this object and the object establishes the registration to a configured PBX. This can be used when the for example the device is located within the public internet and the PBX in a private network.
It must be considered that this is not NAT functionality, so media addresse are not manipulated. This means that in this scenario any media streams must use public addresses.
- Registration to internal PBX
- Parameters for the registration to the PBX (H.323 only)
- Gatekeeper Id
- Gatekeeper Id/Domain of the PBX
- Primary Addr
- The primary address the registration is attempted to
- Alternate Addr
- The alternate address
- Name
- Name used for the registration
- PBX Password
- If the checkmark is set, the PBX admin password is used for the registration
- Registration from external
- Parameters for the registration of the device (SIP or H.323)
- Name
- Registration Name
- PBX Password
- If the checkmark is set, the PBX admin password is used for the registration