Howto:QSC IPfonie extended - SIP Provider Compatibility Test: Difference between revisions
m (→Configuration) |
m (→Summary) |
||
Line 4: | Line 4: | ||
'''SIP Provider: QSC''' | '''SIP Provider: QSC''' | ||
<!-- | |||
* Features: | * Features: | ||
Line 21: | Line 21: | ||
QSC has achieved 98% of all possible test points. For more information on the test rating, please refer to [[Howto:SIP_Interop_Test_Description#Summary|Test Description]] | QSC has achieved 98% of all possible test points. For more information on the test rating, please refer to [[Howto:SIP_Interop_Test_Description#Summary|Test Description]] | ||
--> | |||
== Current test state == | == Current test state == |
Revision as of 12:57, 4 October 2012
Innovaphone Compatibility Test Report
Summary
SIP Provider: QSC
Current test state
This product is being tested right now. The test is not yet completed.
Testing Enviroment
Scenario NAT
This scenario describes a setup where the PBX and phones are in a private network. The IP800 must use a stun server, in order to send correct SIP - messages. The IP800 works as media relay, all RTP - streams go through the PBX.
Test Results
For more information on the test procedure, please read the following wiki article: SIP Interop Test Description. Bold lines in the test results indicate a KO-criteria.
Basic Call
Tested feature | Result |
---|---|
call using g711a | |
call using g711u | |
call using g723 | |
call using g729 | |
call using g722 | |
Overlapped sending | |
early media channel | |
Fax using T.38 | |
Reverse Media Negotiation | |
CGPN can be suppressed | |
CLIP no screening | |
Long time call possible(>30 min) | |
External Transfer | |
NAT Detection | |
Redundancy | |
SIP over TCP | |
Voice Quality OK? |
Direct Dial In
Tested feature | Result |
---|---|
Inbound(Provider -> Innovaphone) | |
Outbound(Innovaphone -> Provider) |
DTMF
Tested feature | Result |
---|---|
DTMF tones sent correctly | |
DTMF tones sent correctly via SIP-Info | |
DTMF tones received correctly |
Hold/Retrieve
Tested feature | Result |
---|---|
Call can be put on hold | |
Held end hears music on hold / announcement from PBX |
Transfer with consultation
Tested feature | Result |
---|---|
Call can be transferred | |
Held end hears music on hold |
The following tests are made to test if call transfer is working.
Tested feature | Voice Ok? | MoH Ok? |
---|---|---|
inno1 calls inno2. inno2 transfers to sip-provider-phone. | ||
inno1 calls inno2. inno1 transfers to sip-provider-phone. | ||
inno1 calls sip-provider-phone. inno1 transfers to inno2. | ||
inno1 calls sip-provider-phone. sip-provider-phone transfers to inno2. | ||
sip-provider-phone calls inno1. inno1 transfers to inno2. | ||
sip-provider-phone calls inno1. sip-provider-phone transfers to inno2. |
Transfer with consultation (alerting only)
Tested feature | Result |
---|---|
Call can be transferred | |
Held end hears music on hold or dialling tone | |
Call returns to transferring device if the third
Endpoint is not available |
The following tests are made to test if call transfer is working.
Tested feature | Voice Ok? | MoH Ok? |
---|---|---|
inno1 calls inno2. inno2 transfers to sip-provider-phone. | ||
inno1 calls inno2. inno1 transfers to sip-provider-phone. | ||
inno1 calls sip-provider-phone. inno1 transfers to inno2. | ||
inno1 calls sip-provider-phone. sip-provider-phone transfers to inno2. | ||
sip-provider-phone calls inno1. inno1 transfers to inno2. | ||
sip-provider-phone calls inno1. sip-provider-phone transfers to inno2. |
Blind Transfer
Tested feature | Result |
---|---|
Call can be transferred | |
Held end hears dialling tone |
The following tests are made to test if call transfer is working.
Tested feature | Voice Ok? |
---|---|
inno1 calls inno2. inno2 transfers to sip-provider-phone. | |
inno1 calls inno2. inno1 transfers to sip-provider-phone. | |
inno1 calls sip-provider-phone. inno1 transfers to inno2. | |
inno1 calls sip-provider-phone. sip-provider-phone transfers to inno2. | |
sip-provider-phone calls inno1. inno1 transfers to inno2. | |
sip-provider-phone calls inno1. sip-provider-phone transfers to inno2. |
Blind Transfer (alerting only)
Tested feature | Result |
---|---|
Call can be transferred | |
Held end hears dialling tone |
The following tests are made to test if call transfer is working.
Tested feature | Voice Ok? |
---|---|
inno1 calls inno2. inno2 transfers to sip-provider-phone. | |
inno1 calls sip-provider-phone. sip-provider-phone transfers to inno2. | |
sip-provider-phone calls inno1. inno1 transfers to inno2. |
Broadcast Group & Waiting Queue
Tested feature | Result |
---|---|
Caller can make a call to a Broadcast Group | |
Caller can make a call to a Waiting Queue | |
Announcement if nobody picks up the call |