Reference10:Concept Phone Firmware 10: Difference between revisions
(New page: <!-- keywords: phone, firmware, v10, ip110a, ip200b, ip240a, ip241a, ip110-sip, ip110-no-ppp, ip200a-sip --> {{PAGENAME}} =Applies To= This information applies to * ...) |
(No difference)
|
Revision as of 12:40, 4 April 2014
Applies To
This information applies to
- innovaphone IP110, IP150, IP200A, IP240 operated with
- innovaphone firmware V10
Description
This article gives an overview about the different v10-firmware variants for above mentioned innovaphone phone types.
New V10 features such as video and upgrades in terms of telephony features shall be available within already existing phones - independent of their type, age and available on-board memory.
To protect these investments, starting with V10 several new firmware variants providing a subset of functionality have been generated. These variants are part of the V10-firmware-packages and are explained in the table below:
FW-name | Display* | SIP | H.323 | PPP | Video | Note |
---|---|---|---|---|---|---|
ipxxx | no | yes | yes | yes | no SIP | |
ipxxx-sip | ps | yes | no | yes | yes | no H.323 |
ipxxx-no-ppp | hs | yes | yes | no | yes | no PPP |
xxx stands for the phone model (110, 150, 200A, 240).
- Abbreviation displayed in the General/Info screen next to the version-number
Depending on the use-case (mainly the required communication protocol), a dedicated firmware -version has to be used.
Exceptions
Above mentioned settings do not apply for phones with sufficent memory able to operate with the full-featured firmware:
- IP222, IP232 and IP241
and
- IP110A, IP200B, IP240A