Howto:Phone Features when registering an innovaphone Phone to the PBX with SIP: Difference between revisions

From innovaphone wiki
Jump to navigation Jump to search
Line 17: Line 17:


==Version==
==Version==
Firmware Version:
* Innovaphone PBX version V11rs2
1.0.2.3
* Innovaphone IP222 with v11sr2
 
Hardware Version:
1.0.0.1
 
innovaphone Firmware:
SR2 HF5


== Test Setup ==
== Test Setup ==

Revision as of 17:01, 24 April 2015

Summary

Certification Status

This product is being tested right now. The test is not yet completed.


Version

  • Innovaphone PBX version V11rs2
  • Innovaphone IP222 with v11sr2

Test Setup

Testreport Terminals SIP or H323 1.PNG

Device Setup

Tested feature Result
Register Device w/o specific configuration (requires DHCP) OK
DHCP is default OK
DHCP yields timeserver and time displays correctly OK
SNTP config has TZ string for timezone/dst autoconfig
DHCP yields correct default gateway OK
Device supports magic registration (e.g. by serial) OK
Fixed registrations works OK
Device registers w/o Extension (just by name) OK
Device registers by name with non-latin1 characters (e.g. UserÄÖÜ)
Device registers by extension OK
Device registers with password OK
Device registers multiple identities OK
2nd GK is supported (mit SIP??)
Changing registrations between GK1 and GK2 (mit SIP??)
PBX redirect (UserObject on Master/Phone at Slave registered)
Physical Location (@PBX) correct?
Device supports STUN protocol OK
Device sends NAT - keepalive messages OK
Device usable in hosting scenarios?
Device refreshes the PBX registration OK
Device supports SIP over TCP OK
Device supports SRTP OK
Device supports SIPS (SIP over TLS) OK
Device supports HTTPS OK
Device supports VAD (Voice activity detection)
Device supports Auto-Answer (needed when used with CTI client) OK
Supported menu languages

Test Results

Tools clipart.png FIXME: Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report

Basic Call

Tested feature Result
call using g711a OK
call using g711u OK
call using g729 OK
call using g722 OK
Overlapped sending
Device sets up an early media channel for incoming calls
Device sets up an early media channel for outgoing calls
Device shows called id number
Device shows called id name
Device shows called id display info
CGPN can be suppressed OK
Reverse Media Negotiation
Device shows CDPN/CGPN on incoming call OK
Device shows CDPN/CGPN on outgoing call OK
Device shows connected number OK
Device shows diverting number OK
Device supports distinctive ringing OK
Device supports asymetric codec negotiation
Device supports codec renegotiation during a conversation OK
Device shows correct display message in case of busy CDPN
Device shows correct display message in case of not existing CDPN
Device shows correct display message in case that the call is declined
3party conference possible
Device supports display updates during call(needed for Directory Search object)
Long Time Call (>30 min) works? OK
Registration redirecting works?
Incoming SRTP call - SRTP not enabled on DUT OK
Incoming SRTP call - SRTP enabled on DUT OK
Voice Quality OK? OK

DTMF

Tested feature Result
DTMF tones sent correctly OK
DTMF tones received correctly OK

Hold/Retrieve

Tested feature Result
Device handles incoming hold correctly OK
Device can put a call on hold using correctly(inactive or sendonly) OK

Transfer with consultation

Tested feature Voice Ok? MoH Ok?
inno1 calls inno2. inno2 transfers to testphone.
inno1 calls inno2. inno1 transfers to testphone.
inno1 calls testphone. inno1 transfers to inno2.
inno1 calls testphone. testphone transfers to inno2.
testphone calls inno1. inno1 transfers to inno2.
testphone calls inno1. testphone transfers to inno2.

Transfer with consultation (alerting only)

Tested feature Voice Ok? MoH Ok?
inno1 calls inno2. inno2 transfers to testphone.
inno1 calls inno2. inno1 transfers to testphone.
inno1 calls testphone. inno1 transfers to inno2.
inno1 calls testphone. testphone transfers to inno2.
testphone calls inno1. inno1 transfers to inno2.
testphone calls inno1. testphone transfers to inno2.

Blind Transfer

Tested feature Voice Ok?
inno1 calls inno2. inno2 transfers to testphone.
inno1 calls inno2. inno1 transfers to testphone.
inno1 calls testphone. inno1 transfers to inno2.
inno1 calls testphone. testphone transfers to inno2.
testphone calls inno1. inno1 transfers to inno2.
testphone calls inno1. testphone transfers to inno2.

Blind Transfer (alerting only)

Tested feature Voice Ok?
inno1 calls inno2. inno2 transfers to testphone.
inno1 calls testphone. testphone transfers to inno2.
testphone calls inno1. inno1 transfers to inno2.

Broadcast Group & Waiting Queue

Tested feature Result
testphone makes call to a Broadcast Group. inno1 picks up.
inno1 makes call to a Broadcast Group. testphone picks up.
testphone makes call to a Waiting Queue. inno1 picks up before announcement is played.
testphone makes call to a Waiting Queue. inno1 picks up after announcement is played.
inno1 makes call to a Waiting Queue. testphone picks up.

DTMF Features

Tested feature Result
CFU Activate/Deactivate
CFB Activate/Deactivate
CFNR Activate/Deactivate
Pickup Group
Pickup Directed
Park/Unpark
Park To/Unpark From
Call Completion Busy
Call Completion Cancel
Join Group/Leave Group
Join All Groups/Leave All Groups
Enable mobility/Disable mobility
Enable mobility cw/Disable mobility cw
Set presence

Other Features

Directory

Tested feature Result
Device built-in directory
Exists OK
Can be dialled from OK
Does CLI resolution OK
display update if directory object is used?


Tested feature Result
External LDAP Server supported OK
Can be dialled from OK
Does CLI resolution OK
display update if directory object is used? OK

Keys

Tested feature Result
Device has speed dial keys OK
Device has programmable function keys OK
Device has partner keys OK

CTI Features (with SOAP / TAPI / myPBX)

Tested feature Result
User Call - outgoing call OK
User Connect - Answer incoming call OK
User Reject - Reject alerting call
User Disconnect - Disconnect active call OK
User Hold - Put connected call on hold OK
User Hold Retrieve - Retrieve call on hold OK
User Transfer - Transfer with Consult
User Transfer - Transfer with Consult (Alerting only)
User Transfer - Blind Transfer
3PTY - Make 3rd Party Call
Park Call / Retrieve Parked Call OK
Pickup Call OK
Connected Number Update on Display

UC Features

Tested feature Result
Video calls possible? OK
Video conference possible? (max. amount of participants)
Video Codecs
enable/disable video during call
Application Sharing NOK
Set own presence possible?
See presence of others possible? OK
send IM - messages to phones possible? OK

Configuration

innovaphone configuration

3rd party product configuration

Related Articles