Reference:Administration/PBX/Objects/Number Map: Difference between revisions

From innovaphone wiki
Jump to navigation Jump to search
(New page: The Number Map PBX object allows you to store abbreviated dialling numbers in the PBX. For example, you can define the abbreviated dialling number #1 (Number = #1) for the local police sta...)
 
No edit summary
Line 1: Line 1:
The Number Map PBX object allows you to store abbreviated dialling numbers in the PBX. For example, you can define the abbreviated dialling number #1 (Number = #1) for the local police station (07031-110). When using several locations, this can have undesired side-effects however, since a subscriber of a different location (B) would always call the police station of the one location (A) with this abbreviated dialling number. Therefore, when defining a Number Map, the IP address range with network mask must always be specified.
This object maps the dialed number to a new one optionally depending on the registration address of the calling endpoint. Matching of the registration address only work if the calling endpoint is registered on the PBX on which this object is defined (the PBX property of the Number Map object).


The following specifications are made in the MAP section:
It may be used for abbreviated number dialing, or if used with registration address match to dial certain destinations depending on the physical location of the phone (e.g. to make shure the local emergency number is called).
* '''Address:''' The IP address range that is authorised to use this Number Map. To allow all subscribers to use this Number Map, you can leave this field empty.
 
* '''Mask:''' If all subscribers are to be permitted to use this Number Map, you must enter the subnet mask 0.0.0.0; otherwise, you enter the relevant network mask of the authorised IP address range.
{|
* '''Dest. No:''' The destination number with which this Number Map is to be linked.
|valign=top nowrap=true|'''Address/Mask'''
|Define the IP network for which this destination address shall be used. If left blank no check on the registration address is performed.
|-
|valign=top nowrap=true|'''Dest. No'''
|The number to be dialed
|}

Revision as of 19:47, 11 May 2007

This object maps the dialed number to a new one optionally depending on the registration address of the calling endpoint. Matching of the registration address only work if the calling endpoint is registered on the PBX on which this object is defined (the PBX property of the Number Map object).

It may be used for abbreviated number dialing, or if used with registration address match to dial certain destinations depending on the physical location of the phone (e.g. to make shure the local emergency number is called).

Address/Mask Define the IP network for which this destination address shall be used. If left blank no check on the registration address is performed.
Dest. No The number to be dialed
Retrieved from "https://wiki.innovaphone.com/index.php?title=Reference:Administration/PBX/Objects/Number_Map&oldid=4306"