Howto:NL - MOTTO - VaMo Configuration

This configuration if for registering a Motto Sim card to the PBX using a Innovaphone Session Border Controller.

PBX configuration

Create a new user object.

Description: 	Motto VaMo
Long Name: 	Name of the user
Display Name:   Name of the user	
Name:		(international format of the mobile number example: 31612345678)
Number:	 	(extension number for this user)
Password:	(password for the SIP registration)	
Hardware Id:	(international format of the mobile number example: 31612345678)
PBX password:	On

Session Border Controller object setup

On he SBC create a net Session Border object for the SIM:

Long Name: 	Name of the user
Password:	(password for the SIP registration)
Media Relay: 	On
Gatekeeper Id:	ID of the PBX
Primary Adr:	IP of the PBX
Name:		(international format of the mobile number example: 31612345678)
PBX Password:	On
Name:		(extension number for this user)
PBX Password:	Off
TLS Only:	Off

Press OK

Set Sip config on the PBX and SBC

Set this option using Maintenance, Diagnostics, Command.

!config add SIP /take-source-addr-as-contact-addr /x-ice-disabled
!config write
!config activate

reboot the PBX and SBC to be sure these options have been enabled.

Motto Flux portal SIM card settings

Device: 		SIM card 
Registration server:	IP or DNS name of the Session Border Controller.
SRV option 	 	(disabled)
Port: 			5060 (SIP port)
From user: 		(extension of the user object)
Username: 		(international format of the mobile number example: 31612345678)
Password: 		(password of the user object)
DTMF signaling mode: 	auto

Register the SIM.

Check the registration on the SBC and PBX using the logging.

Adjust the settings on the portal to route calls to the PBX / mobile or scheduled mixed.