Howto:How to physically erase flash memory content: Difference between revisions
Jump to navigation
Jump to search
Line 15: | Line 15: | ||
The dialling list (both incoming and outgoing) is cleared using the following command: | The dialling list (both incoming and outgoing) is cleared using the following command: | ||
mod cmd | mod cmd PHONE/LIST-UI clear-all | ||
The list can be actually physically erased from flash memory using erase. This should be required only rarely. | The list can be actually physically erased from flash memory using erase. This should be required only rarely. |
Revision as of 15:20, 12 June 2019
Innovaphone devices may store sensitive information in flash memory. Here is how to physically purge any information from flash.
Applies To
This information applies to
- innovaphone IP Phones, V5.01
Build 04-5784 and later.
More Information
Clearing the call list
The dialling list (both incoming and outgoing) is cleared using the following command:
mod cmd PHONE/LIST-UI clear-all
The list can be actually physically erased from flash memory using erase. This should be required only rarely.
Restoring all settings which are not part of the config file
The command
mod cmd PHONECFG0 reset HOT
will restore default values to all phone settings which are not part of the confg file (and thus cannot be reset using a config upload), except for the volume settings)