Howto:Arcor-IP Anlagenanschluss - Arcor - SIP Testreport: Difference between revisions

From innovaphone wiki
Jump to navigation Jump to search
m (New page: '''Innovaphone Compatibility Test Report''' == Summary == '''SIP Provider: Arcor''' <!--The provider supports all required innovaphone features and is therefore qualified as [[Howto:Wha...)
 
Line 53: Line 53:
|----
|----
|'''call using g711a'''
|'''call using g711a'''
|'''Yes'''
|'''?'''
|----
|----
|'''call using g711u'''
|'''call using g711u'''
|'''Yes'''
|'''?'''
|----
|----
|call using g723
|call using g723
|Yes
|?
|----
|----
|call using g729
|call using g729
|Yes
|?
|----
|----
|Overlapped sending
|Overlapped sending
|No
|?
|----
|----
|'''early media channel'''
|'''early media channel'''
|'''Yes'''
|'''?'''
|----
|----
|Fax using T.38
|Fax using T.38
|Yes
|?
|----
|----
|CGPN can be supressed
|CGPN can be supressed
|Yes
|?
|----
|----
|'''Reverse Media Negotiaton'''
|'''Reverse Media Negotiaton'''
|'''Yes'''
|'''?'''
|----
|----
|'''Voice Quality OK?'''
|'''Voice Quality OK?'''
|'''Yes'''
|'''?'''
|}
|}


Revision as of 16:33, 30 April 2008

Innovaphone Compatibility Test Report

Summary

SIP Provider: Arcor

Current test state

This product is being tested right now. The test is not yet completed.


Testing Enviroment

Scenario NAT

HFO SIP Compatibility Test 5.PNG

This scenario describes a setup where the PBX and phones are in a private network. The IP800 must use a stun server, in order to send correct SIP - messages. The IP800 works as media relay, all RTP - streams go through the PBX.

Test Results

For more information on the test procedure, please read the following wiki article: SIP Interop Test Description. Bold lines in the test results indicate a KO-criteria.

Basic Call

Tested feature Result
call using g711a ?
call using g711u ?
call using g723 ?
call using g729 ?
Overlapped sending ?
early media channel ?
Fax using T.38 ?
CGPN can be supressed ?
Reverse Media Negotiaton ?
Voice Quality OK? ?

Direct Dial In

Tested feature Result
Inbound(Provider -> Innovaphone) Yes
Outbound(Innovaphone -> Provider) Yes

DTMF

Tested feature Result
DTMF tones sent correctly Yes
DTMF tones received correctly Yes

Hold/Retrieve

Tested feature Result
Call can be put on hold Yes
Held end hears music on hold / announcement from PBX Yes
Held end hears music on hold / announcement from provider No

Transfer with consultation

Tested feature Result
Call can be transfered Yes
Held end hears music on hold Yes
Call returns to transferring device if the third

Endpoint is not available

Yes

Transfer with consultation (alerting only)

Tested feature Result
Call can be transfered Yes
Held end hears music on hold or dialing tone Yes
Call returns to transferring device if the third

Endpoint is not available

Yes

Blind Transfer

Tested feature Result
Call can be transfered Yes
Held end hears dialing tone No

Broadcast Group & Waiting Queue

Tested feature Result
Caller can make a call to a Broadcast Group Yes
Caller can make a call to a Waiting Queue Yes
Announcement if nobody picks up the call Yes

Configuration

Firmware version

All innovaphone devices use V6 SR1 HF3 as firmware.

SIP - Trunk

Number Mapping

Route Settings

Media Relay

Fax

Retrieved from "https://wiki.innovaphone.com/index.php?title=Howto:Arcor-IP_Anlagenanschluss_-_Arcor_-_SIP_Testreport&oldid=9391"