Howto:Netia-S.A. - SIP Provider Compatibility Test

From innovaphone wiki
Jump to navigation Jump to search
Tools clipart.png FIXME: Working in progress

Netia S.A. innovaphone Compatibility Test Report

Summary

SIP Provider: Netia.S.A.

The provider supports all required innovaphone features and is therefore qualified as recommended SIP Provider.

That beeing said, the provider has achieved XX,X% of all possible test points (117 on total of 120 Points). For more information on the test rating, please refer to Test Description

They are two methods of setting up a SIP trunk with Netia:

  • Trunk without Registration - Requires to provide the SIP Provider the Client IP Public address that will make the trunk (SBC or PBX).
  • Trunk with Registration - Requires only right credentials (user and password) don't need to know the IP address of client.

We tested the second method. SIP Trunk with Registration.

  • Features:
    • Direct Dial In
    • Fax over IP (T.38)
    • DTMF
    • NAT Detection


  • Supported Codecs by the provider
    • G711 a/u
    • G729
    • T.38 UDP

Current test state

This product is being tested right now. The test is not yet completed.

Testing of this product has been finalized XX, 20XX.

Testing Enviroment

Scenario NAT

HFO SIP Compatibility Test 5.PNG

This scenario describes a setup where the PBX and phones are in a private network. The IP800 should use a stun server, in order to send correct SIP - messages. No need to use Media-relay on IP800 SIP Trunk Interface to provider.

Test Results

For more information on the test procedure, please read the following wiki article: SIP Interop Test Description. Bold lines in the test results indicate a KO-criteria.

Tested feature Result
Call using g711a Yes
Call using g711u Yes
Call using g723 No
Call using g729 Yes
Call using g722 No
Overlapped sending No
Early media channel Yes
Fax using T.38 X
CGPN can be suppressed X
CLIP no screening X
Reverse Media Negotiation Yes
Long time call possible X
External Transfer X
NAT Detection Yes
Voice Quality OK? Yes
Redundacy Mechanism? X

Direct Dial In

Tested feature Result
Inbound(Provider -> Innovaphone) Yes
Outbound(Innovaphone -> Provider) Yes

DTMF

Tested feature Result
DTMF tones sent correctly Yes
DTMF tones sent correctly via SIP-Info X
DTMF tones received correctly Yes

Hold/Retrieve

Tested feature Result
Call can be put on hold Yes
Held end hears music on hold / announcement from PBX Yes

Transfer with consultation

Tested feature Result
Call can be transferred Yes
Held end hears music on hold Yes

Transfer with consultation (alerting only)

Tested feature Result
Call can be transferred Yes
Held end hears music on hold or dialling tone Yes
Call returns to transferring device if the third Endpoint is not available Yes

Blind Transfer

Tested feature Result
Call can be transferred Yes
Held end hears dialling tone Yes

Broadcast Group & Waiting Queue

Tested feature Result
Caller can make a call to a Broadcast Group Yes
Caller can make a call to a Waiting Queue Yes
Announcement if nobody picks up the call Yes

Configuration

Firmware version

All innovaphone devices use V9hf11 as firmware.

SIP - Trunk

Netia-SA - SIP Provider Compatibility Test 1.png

Number Mapping

Netia-SA - SIP Provider Compatibility Test 2.png


We should add 0 on CDPN Out maps so users don't need to dial extra 0 to the Provider.

Route Settings

Since the Provider support Overlap sending there is no need to use "force enblock" option in the routes. We recommend the use of "Interworking QSIG/SIP" option in the routes.