Howto:Toplink SIP Provider Compatibility Test

From innovaphone wiki
Revision as of 13:48, 23 August 2012 by Sga (talk | contribs)
Jump to navigation Jump to search

Innovaphone Compatibility Test Report


Summary

SIP Provider: Toplink

Current test state

This product is being tested right now. The test is not yet completed.


Testing Enviroment

Scenario NAT

HFO SIP Compatibility Test 5.PNG

This scenario describes a setup where the PBX and phones are in a private network. The IP800 doesn't use an stun server. The IP800 doesn't works as media relay.

Test Results

For more information on the test procedure, please read the following wiki article: SIP Interop Test Description. Bold lines in the test results indicate a KO-criteria.

Basic Call

Tested feature Result
call using g711a Yes
call using g711u Yes
call using g723 Yes
call using g729 Yes
call using g722 No
Overlapped sending No
early media channel Yes
Fax using T.38 No
CGPN can be supressed Yes
Clip no screening Yes
Long time call possible(>30 min) Yes
External Transfer No
NAT Detection Yes
Redundancy not tested
SIP over TCP No
Voice Quality OK? Yes

Direct Dial In

Tested feature Result
Inbound(Provider -> Innovaphone) Yes
Outbound(Innovaphone -> Provider) Yes

DTMF

Tested feature Result
DTMF tones sent correctly Yes
DTMF tones sent correctly via SIP-Info No
DTMF tones received correctly Yes

Hold/Retrieve

Tested feature Result
Call can be put on hold Yes
Held end hears music on hold / announcement from PBX No

Transfer with consultation

Tested feature Result
Call can be transferred Yes
Held end hears music on hold Yes, but MoH from provider

Transfer with consultation (alerting only)

Tested feature Result
Call can be transferred No, outgoing call nok
Held end hears music on hold or dialling tone Yes, but MoH from provider
Call returns to transferring device if the third

Endpoint is not available

Yes


Blind Transfer

Blind Transfer

Tested feature Result
Call can be transferred No, outgoing call nok
Held end hears dialling tone Yes

Broadcast Group & Waiting Queue

Tested feature Result
Caller can make a call to a Broadcast Group Yes
Caller can make a call to a Waiting Queue Yes
Announcement if nobody picks up the call Yes

Configuration