Innovaphone Compatibility Test Report
Summary
SIP Provider: QSC
Current test state
This product is being tested right now. The test is not yet completed.
Testing Enviroment
Scenario NAT
This scenario describes a setup where the PBX and phones are in a private network. The IP800 must use a stun server, in order to send correct SIP - messages. The IP800 works as media relay, all RTP - streams go through the PBX.
Test Results
For more information on the test procedure, please read the following wiki article: SIP Interop Test Description. Bold lines in the test results indicate a KO-criteria.
Basic Call
Tested feature
|
Result
|
call using g711a
|
|
call using g711u
|
|
call using g723
|
|
call using g729
|
|
call using g722
|
|
Overlapped sending
|
|
early media channel
|
|
Fax using T.38
|
|
Reverse Media Negotiation
|
|
CGPN can be suppressed
|
|
CLIP no screening
|
|
Long time call possible(>30 min)
|
|
External Transfer
|
|
NAT Detection
|
|
Redundancy
|
|
SIP over TCP
|
|
Voice Quality OK?
|
|
Direct Dial In
Tested feature
|
Result
|
Inbound(Provider -> Innovaphone)
|
|
Outbound(Innovaphone -> Provider)
|
|
DTMF
Tested feature
|
Result
|
DTMF tones sent correctly
|
|
DTMF tones sent correctly via SIP-Info
|
|
DTMF tones received correctly
|
|
Hold/Retrieve
Tested feature
|
Result
|
Call can be put on hold
|
|
Held end hears music on hold / announcement from PBX
|
|
Transfer with consultation
Tested feature
|
Result
|
Call can be transferred
|
|
Held end hears music on hold
|
|
The following tests are made to test if call transfer is working.
Tested feature
|
Voice Ok?
|
MoH Ok?
|
inno1 calls inno2. inno2 transfers to sip-provider-phone.
|
|
|
inno1 calls inno2. inno1 transfers to sip-provider-phone.
|
|
|
inno1 calls sip-provider-phone. inno1 transfers to inno2.
|
|
|
inno1 calls sip-provider-phone. sip-provider-phone transfers to inno2.
|
|
|
sip-provider-phone calls inno1. inno1 transfers to inno2.
|
|
|
sip-provider-phone calls inno1. sip-provider-phone transfers to inno2.
|
|
|
Transfer with consultation (alerting only)
Tested feature
|
Result
|
Call can be transferred
|
|
Held end hears music on hold or dialling tone
|
|
Call returns to transferring device if the third
Endpoint is not available
|
|
The following tests are made to test if call transfer is working.
Tested feature
|
Voice Ok?
|
MoH Ok?
|
inno1 calls inno2. inno2 transfers to sip-provider-phone.
|
|
|
inno1 calls inno2. inno1 transfers to sip-provider-phone.
|
|
|
inno1 calls sip-provider-phone. inno1 transfers to inno2.
|
|
|
inno1 calls sip-provider-phone. sip-provider-phone transfers to inno2.
|
|
|
sip-provider-phone calls inno1. inno1 transfers to inno2.
|
|
|
sip-provider-phone calls inno1. sip-provider-phone transfers to inno2.
|
|
|
Blind Transfer
Tested feature
|
Result
|
Call can be transferred
|
|
Held end hears dialling tone
|
|
The following tests are made to test if call transfer is working.
Tested feature
|
Voice Ok?
|
inno1 calls inno2. inno2 transfers to sip-provider-phone.
|
|
inno1 calls inno2. inno1 transfers to sip-provider-phone.
|
|
inno1 calls sip-provider-phone. inno1 transfers to inno2.
|
|
inno1 calls sip-provider-phone. sip-provider-phone transfers to inno2.
|
|
sip-provider-phone calls inno1. inno1 transfers to inno2.
|
|
sip-provider-phone calls inno1. sip-provider-phone transfers to inno2.
|
|
Blind Transfer (alerting only)
Tested feature
|
Result
|
Call can be transferred
|
|
Held end hears dialling tone
|
|
The following tests are made to test if call transfer is working.
Tested feature
|
Voice Ok?
|
inno1 calls inno2. inno2 transfers to sip-provider-phone.
|
|
inno1 calls sip-provider-phone. sip-provider-phone transfers to inno2.
|
|
sip-provider-phone calls inno1. inno1 transfers to inno2.
|
|
Broadcast Group & Waiting Queue
Tested feature
|
Result
|
Caller can make a call to a Broadcast Group
|
|
Caller can make a call to a Waiting Queue
|
|
Announcement if nobody picks up the call
|
|
Configuration
Related Articles
Tk Anlagenliste.pdf