Howto:E-Fon - ADAPT - Provider Compatibility Test

From innovaphone wiki
Jump to navigation Jump to search
Tools clipart.png FIXME: Note: Article - Name should be Howto:Productname-SIP-provider-compatibility-test. It is important that the productname is in the article title and not the provider name or country-a provider could have different products or the same product in more countries

Innovaphone Compatibility Test Report

Summary

SIP Provider: E-Fon

The provider supports all required innovaphone features and is therefore qualified as recommended SIP Provider.


...

That being said, the provider has achieved x% of all possible test points. For more information on the test rating, please refer to Test Description


  • Features:
    • Direct Dial In
    • Fax over IP (T.38)
    • DTMF
  • Supported Codecs by the provider
    • G711
    • G729
    • G723
    • G726
    • T.38 UDP

Current test state

This product is being tested right now. The test is not yet completed.


Testing Enviroment

SIPProviderTestTopology1.PNG

This scenario describes a setup where the PBX and phones are in a private network.

  • the SIP trunk is configured without Media Relay and without exclusive coder. This is the case if all tests were successful

Test Results

For more information on the test procedure, please read the following wiki article: SIP Interop Test Description. Bold lines in the test results indicate a KO-criteria.


Basic Call

Tested feature Result
call using g711a OK
call using g711u OK
call using g723 NOK
call using g729 OK
call using g722 OK
Overlapped sending NOK
early media channel OK
Fax using T.38
T.38 Transcoding by the provider
Reverse Media Negotiation OK
CGPN can be suppressed NOK
CLIP no screening OK
Long time call possible(>30 min)
External Transfer OK
NAT Detection OK
Redundancy
SIP over TCP
Voice Quality OK? OK

Direct Dial In

Tested feature Result
Inbound(Provider -> Innovaphone) OK
Outbound(Innovaphone -> Provider) OK
Loop In call(Innovaphone -> Provider -> Innovaphone) OK

DTMF

Tested feature Result
DTMF tones sent correctly
DTMF tones sent correctly via SIP-Info
DTMF tones received correctly

Hold/Retrieve

Tested feature Result
Call can be put on hold OK
Held end hears music on hold / announcement from PBX OK

Transfer with consultation

Tested feature Result
Call can be transferred OK
Held end hears music on hold OK

The following tests are made to test if call transfer is working.

Tested feature Voice Ok? MoH Ok?
inno1 calls inno2. inno2 transfers to PSTN-phone.
inno1 calls PSTN-phone. inno1 transfers to inno2.
inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
PSTN-phone calls inno1. inno1 transfers to inno2. OK OK
PSTN-phone calls inno1. PSTN-phone transfers to inno2.
PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.

Transfer with consultation (alerting only)

Tested feature Result
Call can be transferred
Held end hears music on hold or dialling tone
Call returns to transferring device if the third

Endpoint is not available

The following tests are made to test if call transfer is working.

Tested feature Voice Ok? MoH Ok?
inno1 calls inno2. inno2 transfers to PSTN-phone.
inno1 calls PSTN-phone. inno1 transfers to inno2.
inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
PSTN-phone calls inno1. inno1 transfers to inno2.
PSTN-phone calls inno1. PSTN-phone transfers to inno2.
PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.

Blind Transfer

Tested feature Result
Call can be transferred OK
Held end hears dialling tone OK

The following tests are made to test if call transfer is working.

Tested feature Voice Ok?
inno1 calls inno2. inno2 transfers to PSTN-phone. OK
inno1 calls PSTN-phone. inno1 transfers to inno2.
inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
PSTN-phone calls inno1. inno1 transfers to inno2.
PSTN-phone calls inno1. PSTN-phone transfers to inno2.
PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.

CFU / CFB Transfer

Tested feature Result
Call can be forward
Held end hears dialling tone

CFNR / Blind Transfer (alerting only)

Tested feature Result
Call can be transferred or forward
Held end hears dialling tone

The following tests are made to test if call transfer is working.

Tested feature Voice Ok?
inno1 calls inno2. inno2 transfers to PSTN-phone.
inno1 calls PSTN-phone. PSTN-phone transfers to inno2.
PSTN-phone calls inno1. inno1 transfers to inno2.
PSTN-phone calls inno1. inno1 transfers to other PSTN-phone-2.

Broadcast Group & Waiting Queue

Tested feature Result
Caller can make a call to a Broadcast Group OK
Caller can make a call to a Waiting Queue OK
Announcement if nobody picks up the call OK

Configuration

Firmware version

All innovaphone devices use V1sr11 as firmware.

SIP - Trunk

Number Mapping

Route Settings

Media Relay

Fax