Howto:Nista-IP39-4x - Nista Devices GmbH - 3rd Party Product
Product Name
Certification Status
The tests for this product have been completed.
Testing of this product has been finalized September 29th, 2015.
Category
Functions
- Multiple doors control
- 9 Entry Door Access Codes
- SIP Video: Normal and High Resolution
- Wide angel video camera 130 degrees
- LED display for Welcome message ( up to 8 lines) and phone directory paging
- Up to 99 Short and Long numbers phone directory
- Peer-To-Peer calls
- No Answer call forwarding
- Direct dialing to destinations
- Web-based programming interface (HTTP; HTTPS)
- Touch spotlit keypad
- POE-Power over Ethernet
- Door Status Sensors / Alarm Calls
- Case Opening Alarm
Version
Firmware Version:
- ow2abw
innovaphone version:
- V11r2 SR2
Vendor
Description
Nista IP-39-4x series devices are IP door phones, which use Session Initiation Protocol (SIP) to communicate with IP based environment for call and entry access control.
Nista IP-39-4x series operate as IP PBX/SIP Proxy extension and at the same time as stand alone SIP endpoint.
As a SIP extension or stand alone SIP endpoint Nista IP-39-4x series provide full duplex audio functionality and transmit video using built-in wide-angle HD video camera.
Nista IP-39-4x series provide door access control by using its internal hardware possibilities with mechanical and logical connections interface.
Summary
The Nista-IP39-4x IP Door Phone supports all required innovaphone features and is therefore qualified as recommended product.
The tests were made by the partner Kontel from Poland. Any questions related to this test should be made to the partner Kontel.
For a detailed analysis of the product please have a look at the Nista-IP39-4x - Nista Devices GmbH - Testreport.