Reference:Administration/Relay/Interfaces/Physical

From innovaphone wiki
Revision as of 15:25, 20 November 2007 by Gd (talk | contribs) (→‎Registration)
Jump to navigation Jump to search
There are also other versions of this article available: Reference (this version) | Reference8 | Reference9 | Reference11r1 | Reference13r1 | Reference13r3

On this page a physical interface (ISDN or FXS) can be configured for Gateway use. Number mapping may be configured to normalize the called and calling numbers for internal use. An interface may be registered to a gatekeeper. If this is configured a VOIP interface and routes are generated automatically.

General Configuration

Name Name of the interface. This name is used for local administration only (e.g. it is display in the routing table)
Disable Used to disable the interface without deleting the config
Tones This configures the tone scheme for this interface

Interface Maps

The number mapping on the interface can be either configured manually, or predefined mappings for ISDN Point to Point or ISDN Point to Multipoint interfaces can be used. If predefined mappings are used they can be edited the same way as manual mappings, but if they are changed they are not recognized as predefined mapping anymore.

Point to Point

With the use of a few parameters the Point to Point mapping maps between an external representation of the numbers using the type of number field and an internal representation using Unknown as type of number and prefixes.

Area Code The prefix used to convert from a subscriber number to a national number
Subscriber Number The prefix used to convert from an extension to a subscriber number
National Prefix The prefix used to mark a number as National
International Prefix The prefix used to mark a number as International

Point to Multipoint

With the use of a few parameters the Point to Point mapping maps between an external representation of the numbers using the type of number field and an internal representation using Unknown as type of number and prefixes. Three external numbers (MSNs) are mapped to internal extensions.

MSN1-3,Ext. The external subscriber numbers and the internal extensions they are mapped to.
National Prefix The prefix used to mark a number as National
International Prefix The prefix used to mark a number as International

Registration

The physical interface may be registered using H.323 or SIP. For the VOIP call the media properties can be configured.

Media Properties

Retrieved from "https://wiki.innovaphone.com/index.php?title=Reference:Administration/Relay/Interfaces/Physical&oldid=7168"