Datasheet IP38: Difference between revisions
No edit summary |
(No difference)
|
Revision as of 18:41, 5 January 2023
one height unit (HU) for 19” systems
Weight: 660 g
Interfaces
8 x a/b interface, FXO, RJ-11 (modular Jack 6P2C), two PINs in the middle used
1 x Ethernet: 10/100-BASE-TX (auto negotiation), RJ-45 (modular Jack 8P8C)
„Power over Ethernet“ according to IEEE 802.3af, Class 3
Energy Efficient according to IEEE 802.3az
Hardware
Power supply: Power over Ethernet according to IEEE 802.3af, Class 3
125 MHz CPU, 0.03 GB RAM, 16 MB Flash
recommended ambient working temperature: 0 °C to +45 °C
Humidity: 10% to 90% (not condensed)
Storage temperature: -10 °C to +70 °C
Digital Signal Processor (DSP) for up to 8 voice channels
Voice Codecs
G.711 A-law / µ-law, G.729A
Dynamic Jitter Buffering
Echo Kompensation
Voice Activity Detection
Comfort Noise Generation
Modem support
innovaphone PBX
Platform for up to 10 PBX Users (all-in-one)
VoIP Protocols
H.323 Version 5, including proprietary extensions
H.323 over UDP, TCP, TLS 1.3
SIP Version 2, conform RFC 3261
SIP over UDP, TCP, TLS
RTP, SRTP (SDES, DTLS 1.2), RTCP, ICE
T.38 Fax (supported rates 9.6k and 14.4k) incl. fallback to G.711 (device dependent)
ISDN protocols
valid for gateways including S0/S2M interfaces
Euro ISDN D-channel protocol (E-DSS1)
QSIG D-channel protocols: ECMA1, ECMA2
US D-channel protocols: USA-National-ISDN-1, USA-5ESS, USA-DMS100
Connection modes: Point-to-Point (PtP), Point-to-Multipoint (PtMP)
S0: up to 2 speech channels per interface
S20 E1/T1: up to 30/23 ISDN-speech channels per interface
Operation mode TE/NT adjustable per interface
myApps Application Platform
Universal application platform
Can be operated on gateway models xx11, 11xx (not 1130) and xx13 or as a virtual solution
Provides applications for system administration and UCC client operation.
Excerpt of available applications
System Administration
- Devices app
- Users Admin app
- Contacts app
- Reporting app
- Alarm app and Event app
- Files app
- Calendar app
- innovaphone App Store
- Control/access via UCC client myApps
UCC client myApps (PBX based)
- Phone app and Softphone app (PBX function)
- Call List app
- Chat app
- Fax app
- Voicemail app
- Phone book access system/external/Outlook
- Supported OS: Windows, MacOS, iOS, Android or WebClient
Network
IPv4/IPv6 Support (not myApps-ApplicationPlatform)
NAT, H.323-NAT, STUN, TURN over UDP/TCP
RSTP, EAP-TLS/EAP-MD5 acc. to IEEE 802.1X
LDAP/S support
DHCP support
NTP support
VLAN-ID acc. to IEEE 802.1Q
LLDP support for VLAN configuration
PPPoE, manual or automatic connection after boot
PPTP Tunneling up to 32 tunnels simultaneously, encoding via MPPE
Reverse Proxy, various SBC-functionalities (IPxx11/IPxx13/11xx recommended)
Administration
Password protected administration access via web-browser, optional two-factor authentication
Store and restore configuration files
System-wide automatic upgrade of firmware and configuration data via the myApps Devices app
Automatic ping connection test
Display of interface and connection status
Generation of log and trace files and SNMP.V3-traps
Supplementary Features
- Calling Line Identification
- DTMF tone generation
- Separate volume settings for external devices
- Detection of dialtones
- Detection of busy tones
- Detection of ringing tones and ringing currents
Device-specific licences
Depending on the model, additional PBX channels licences (02-00020-007) for soft conferencing can be extended.
Conformities
see separate information sheet
Order Number: 01-00038-001
innovaphone® AG | Umberto-Nobile-Str. 15 | 71063 Sindelfingen | Germany | T +49 7031 73009-0 | F +49 7031 73009-9 | info@innovaphone.com | www.innovaphone.com
Errors, delivery times and technical specifications may be subject to change. Copyright © 2023 innovaphone® AG