Howto:Config size Limitations
Jump to navigation
Jump to search
FAQ
How many "alias" (E.164 number and H.323 id) can I configure under a GW interface?
If I try to register a GW interface on a Gatekeeper the registration is OK only if I configure up to 31 alias. If I try with 32 the registration fail.
Answer
Hm, difficult to answer to be honest.
There are various restrictions when configuring the relay:
- the total size of the config fiile (all that starts with "config change") must not exceed 64k
- the total line length of a config file line must not exceed 2048 bytes
- the number of words on a config line is limited
So if there is a problem, you can try to use shorter aliases, leave out the e164 (redundant anyway) or split it into 2 GWx entries. Nevertheless, it is ugly.
However, 31 sounds strange. I may well be that the problem actually is in the gatekeeper in the far end.