Howto:Connect to MX-ONE via H.323

Applies To

This information applies to

All units version 6 and 7. Tested only with IP800.

Problem Details

It is not possible to establish a H.323 connection without specifying the name of the Innovaphone unit in the MX-ONE, it is however not nessesery to specify a name of the MX-ONE in the Innovaphone, just not good practice.

System Requirements

IP-connection to MX-One

Configuration

This is an example using IP800 version 7:

MX-ONE connection setup:

ROCAI:ROU=10,SIG=011111100091,SERV=21100000070,SEL=0110000000000010,TRAF=03151515,TRM=6,BCAP=001100; RODAI:ROU=10,TYPE=TL65,VARC=00000111,VARI=00000011,VARO=00000000; RIANI:ROU=10,IP=10.102.77.25,LROUID="HMM",RROUID="ASCOM",CODECS=b-0; RODDI:DEST=51,ROU=10,SRT=1,ADC=062610000000005000600000000; ROEQI:ROU=10,TRU=1-10,IP=10.102.77.25;

IP800 connection setup:

Known Problems

None so far, but only basic features are tested.