Howto:Exchange Server 2007 - Microsoft - SIP Testreport

Status

This product is being tested right now. The test is not yet completed.

Version

Exchange Server 2007 SP1

Version: 08.01.0240.006

Test Results

Basic Call

Tested feature	Result
call using g711a	YES
call using g711u	YES
call using g723	YES
call using g729	NO
Overlapped sending	NO
Early media channel
Fax using T.38	YES - only inbound(from PBX to Exchange)
Voice Quality OK?	YES

DTMF

Tested feature	Result
DTMF tones sent correctly	YES

Hold/Retrieve

Tested feature	Result
Call can be put on hold
Held end hears music on hold / announcement from PBX

Transfer with consultation

Tested feature	Result
Call can be transfered
Held end hears music on hold
Call returns to transferring device if the third Endpoint is not available

Transfer with consultation (alerting only)

Tested feature	Result
Call can be transfered
Held end hears music on hold or dialing tone
Call returns to transferring device if the third Endpoint is not available

Blind Transfer

Tested feature	Result
Call can be transfered
Held end hears dialing tone

Broadcast Group & Waiting Queue

Tested feature	Result
Caller can make a call to a Broadcast Group
Caller can make a call to a Waiting Queue
Announcement if nobody picks up the call

Configuration

innovaphone Configuration

To connect ot the Exchange Server you will need a 'Gateway without Registration'. This is because the Exchange server does not accept registrations and will simply send its 'INVITE' messages to the configured ip address(on port 5060).

It is important to configure as signalling protocol TSIP(SIP over TCP), since Exchange 2007 will not handle SIP messages sent via UDP.