Howto:Exchange Server 2007 - Microsoft - SIP Testreport
Jump to navigation
Jump to search
Status
This product is being tested right now. The test is not yet completed.
Version
Exchange Server 2007 SP1
Version: 08.01.0240.006
Test Results
Basic Call
Tested feature | Result |
---|---|
call using g711a | YES |
call using g711u | YES |
call using g723 | YES |
call using g729 | NO |
Overlapped sending | NO |
Early media channel | |
Fax using T.38 | YES - only inbound(from PBX to Exchange) |
Voice Quality OK? | YES |
DTMF
Tested feature | Result |
---|---|
DTMF tones sent correctly | YES |
Hold/Retrieve
Tested feature | Result |
---|---|
Call can be put on hold | |
Held end hears music on hold / announcement from PBX |
Transfer with consultation
Tested feature | Result |
---|---|
Call can be transfered | |
Held end hears music on hold | |
Call returns to transferring device if the third Endpoint is not available |
Transfer with consultation (alerting only)
Tested feature | Result |
---|---|
Call can be transfered | |
Held end hears music on hold or dialing tone | |
Call returns to transferring device if the third
Endpoint is not available |
Blind Transfer
Tested feature | Result |
---|---|
Call can be transfered | |
Held end hears dialing tone |
Broadcast Group & Waiting Queue
Tested feature | Result |
---|---|
Caller can make a call to a Broadcast Group | |
Caller can make a call to a Waiting Queue | |
Announcement if nobody picks up the call |
Configuration
innovaphone Configuration
To connect ot the Exchange Server you will need a 'Gateway without Registration'. This is because the Exchange server does not accept registrations and will simply send its 'INVITE' messages to the configured ip address(on port 5060).
It is important to configure as signalling protocol TSIP(SIP over TCP), since Exchange 2007 will not handle SIP messages sent via UDP.