Howto:Flash your own Logo on the Kirk 5020 or 5040 Handset: Difference between revisions
(New page: ==Applies To== This information applies to * IP55, IP56 Firmware Version1414 1201 PCS 07Aa (5020) or 1414 1251 PCS 07Aa (5040). <!-- Keywords:Kirk Dect Handset --> ==More Information==...) |
(No difference)
|
Revision as of 13:36, 29 June 2009
Applies To
This information applies to
- IP55, IP56
Firmware Version1414 1201 PCS 07Aa (5020) or 1414 1251 PCS 07Aa (5040).
More Information
Configuration
in Order to be able to flash your own Logo on the Kirk 5020 or 5040 Handset you must have at least Firmware Version1414 1201 PCS 07Aa (5020) or 1414 1251 PCS 07Aa (5040)
You can find the Firmware here:
http://www.polycom.eu/support/voice/dect/dect_5020_handset.html [^] http://www.polycom.eu/support/voice/dect/dect_5040_handset.html [^]
Handset Management Tool: http://downloads.polycom.com/voice/KIRK/KIRK_5020_5040_Handset_Management_1_3_0_18_setup.zip [^]
The maximum size should not exceed 128x60 but there should be no restrictions on the color depth.
The new Q3/2009 Release Firmware will be online from the 01.07.2009 (P08Aa)
[[Category:Howto|Template:Flash your own Logo on the Kirk 5020 or 5040 Handset]]