Howto:France - Senso Telecom-SIP Trunk - SIP Provider: Difference between revisions
m (New page: '''Innovaphone Compatibility Test Report''' == Summary == <!-- '''SIP Provider: Name''' The provider supports all required innovaphone features and is therefore qualified as [[Howto:What...) |
No edit summary |
||
Line 2: | Line 2: | ||
== Summary == | == Summary == | ||
'''SIP Provider: Senso Telecom''' | |||
The provider '''does not support''' all required innovaphone features and is therefore '''not''' qualified as [[Howto:What_is_a_%22recommended_product%22%3F#SIP_Provider|recommended SIP Provider]]. | |||
The main reasons for not passing the test are number display problems (DDI) and no support for early media. | |||
That being said, the provider has achieved | That being said, the provider has achieved 76% of all possible test points. For more information on the test rating, please refer to [[Howto:SIP_Interop_Test_Description#Summary|Test Description]] | ||
* Features: | * Features: | ||
** DTMF | ** DTMF | ||
Line 21: | Line 18: | ||
** G711 | ** G711 | ||
** G729 | ** G729 | ||
== Current test state == | == Current test state == | ||
<!--{{Template:Compat Status "planned"}} --> | <!--{{Template:Compat Status "planned"}} --> | ||
{{Template:Compat Status "in progress"}} | <!--{{Template:Compat Status "in progress"}} --> | ||
<!-- {{Template:Compat Status "certified"|certificate=Product_-_Vendor_-_3rd_Party_Product_-_Desc-product-cert.pdf}} --> | <!-- {{Template:Compat Status "certified"|certificate=Product_-_Vendor_-_3rd_Party_Product_-_Desc-product-cert.pdf}} --> | ||
<!-- {{Template:Compat Status "tested"(sip provider)}} --> | <!-- {{Template:Compat Status "tested"(sip provider)}} --> | ||
{{Template:Compat Status "rejected"}} | |||
<!-- {{Template:Compat Status "customer-testimonial"}} --> | <!-- {{Template:Compat Status "customer-testimonial"}} --> | ||
Testing of this product has been finalized January 11th, 2011. | |||
== Testing | == Testing Environment == | ||
=== Scenario NAT === | === Scenario NAT === | ||
Line 85: | Line 79: | ||
|---- | |---- | ||
|'''Long time call possible(>30 min)''' | |'''Long time call possible(>30 min)''' | ||
|Yes | |'''Yes''' | ||
|---- | |---- | ||
|'''External Transfer''' | |'''External Transfer''' | ||
Line 200: | Line 194: | ||
All innovaphone devices use V8 hotfix8 (build 80500.28) as firmware. | All innovaphone devices use V8 hotfix8 (build 80500.28) as firmware. | ||
[[Category:Compat|{{PAGENAME}}]] | [[Category:Compat|{{PAGENAME}}]] |
Latest revision as of 14:55, 11 January 2011
Innovaphone Compatibility Test Report
Summary
SIP Provider: Senso Telecom
The provider does not support all required innovaphone features and is therefore not qualified as recommended SIP Provider.
The main reasons for not passing the test are number display problems (DDI) and no support for early media.
That being said, the provider has achieved 76% of all possible test points. For more information on the test rating, please refer to Test Description
- Features:
- DTMF
- Supported Codecs by the provider
- G711
- G729
Current test state
The tests for this product could not be completed or not all mandatory tests were passed. See the Summary section for more details.
Testing of this product has been finalized January 11th, 2011.
Testing Environment
Scenario NAT
This scenario describes a setup where the PBX and phones are in a private network. The IP800 must use a stun server, in order to send correct SIP - messages. The IP800 works as media relay, all RTP - streams go through the PBX.
Test Results
For more information on the test procedure, please read the following wiki article: SIP Interop Test Description. Bold lines in the test results indicate a KO-criteria.
Basic Call
Tested feature | Result |
---|---|
call using g711a | Yes |
call using g711u | Yes |
call using g723 | No |
call using g729 | Yes |
Overlapped sending | No |
early media channel | No |
Fax using T.38 | No |
Reverse Media Negotiation | Yes |
CGPN can be suppressed | Yes |
CLIP no screening | No |
Long time call possible(>30 min) | Yes |
External Transfer | Yes |
NAT Detection | No |
Voice Quality OK? | Yes |
Direct Dial In
Tested feature | Result |
---|---|
Inbound(Provider -> Innovaphone) | No - Number displayed incorrect |
Outbound(Innovaphone -> Provider) | No - Number displayed incorrect |
DTMF
Tested feature | Result |
---|---|
DTMF tones sent correctly | Yes |
DTMF tones received correctly | Yes |
Hold/Retrieve
Tested feature | Result |
---|---|
Call can be put on hold | Yes |
Held end hears music on hold / announcement from PBX | Yes |
Transfer with consultation
Tested feature | Result |
---|---|
Call can be transferred | Yes |
Held end hears music on hold | Yes |
Transfer with consultation (alerting only)
Tested feature | Result |
---|---|
Call can be transferred | Yes |
Held end hears music on hold or dialling tone | Yes |
Call returns to transferring device if the third
Endpoint is not available |
Yes |
Blind Transfer
Tested feature | Result |
---|---|
Call can be transferred | Yes |
Held end hears dialling tone | Yes |
Broadcast Group & Waiting Queue
Tested feature | Result |
---|---|
Caller can make a call to a Broadcast Group | Yes |
Caller can make a call to a Waiting Queue | Yes |
Announcement if nobody picks up the call | Yes |
Configuration
Firmware version
All innovaphone devices use V8 hotfix8 (build 80500.28) as firmware.