Howto:How to change language settings on IP110/IP150/IP200/IP230?: Difference between revisions
Jump to navigation
Jump to search
(New page: ==Summary== This article describes how to change phone menu language of innovaphone phones from default German to English or another language. ==Applies To== This information applies to ...) |
(No difference)
|
Revision as of 18:01, 19 April 2007
Summary
This article describes how to change phone menu language of innovaphone phones from default German to English or another language.
Applies To
This information applies to
- IP 110, V6
- IP 150, V6
- IP 200, V6
- IP 230, V6
Configuration
There are many ways to set language on IP110/IP200/IP230 phone:
- manually (via web interface)
- manually (phone menu)
- via DHCP-Server (running on innovaphone Gateway)
- via DHCP-Server (running on Microsoft Server)
Manually (via web interface)
Point your web browser to phones web interface (e.g. http://192.168.0.1). Go to "Configuration" -> "Registration 1" -> "Preferences" and set "Language" dropdown box to you preferred language.
Since default language is German:
- Press "Menu"-Button
- Go to menu item "Nutzerliste" or "Nutzer"
- Press "->"-Button 3 times, till you see "Sprache: Deutsch"
- Set preferred language with "->"-Button
- Then press "Menu"-Button 2 times
- Select "Ja" and press "->"-Button
DHCP-Server (running on innovaphone Gateway)
Go to "Configuration" -> "ETH0" -> "DHCP-Server" and type eng into "Language"-Field.
DHCP-Server (running on Microsoft Server)
- FIXME
See related article for more information: http://www.innovaphone.com/inno-kb/Article.aspx?id=10632
However the best way is to deploy and configure the phones via DHCP-Server running on innovaphone Gateway.