Howto:IT - Telmekom - SIP Trunk SIP-Provider (2016): Difference between revisions

From innovaphone wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
== Summary ==  
== Summary ==  
{{Template:SIP_TEST_STATUS_complete|update=September 2nd, 2016|url=http://www.telmekom.com/service/|productname=SIP_Trunk|providername=Telmekom}}
{{Template:SIP_TEST_STATUS_complete|update=January 20th, 2017|url=http://www.telmekom.com/service/|productname=SIP_Trunk|providername=Telmekom}}
<internal>Provider SBC: TELES-SBC</internal>
<internal>Provider SBC: TELES-SBC</internal>


Line 8: Line 8:
; CLNS : {{SIP_TEST_FACT_CLNS}}
; CLNS : {{SIP_TEST_FACT_CLNS}}
; CLNS ONNET : {{SIP_TEST_FACT_CLNS ONNET}}
; CLNS ONNET : {{SIP_TEST_FACT_CLNS ONNET}}
; CONN NR INCOMING : {{SIP_TEST_FACT_CONN NR INCOMING}}
; MOBILITY : {{SIP_TEST_FACT_MOBILITY}}
; MOBILITY : {{SIP_TEST_FACT_MOBILITY}}
; RALERT DISC : {{SIP_TEST_FACT_RALERT DISC}}
; RALERT DISC : {{SIP_TEST_FACT_RALERT DISC}}
Line 16: Line 17:
; SIP INFO : {{SIP_TEST_FACT_SIP INFO}}
; SIP INFO : {{SIP_TEST_FACT_SIP INFO}}


<small>{{SIP_TEST_FACTS_LIST}} [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_180_RINGING_FAILS|180_RINGING]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_BASIC_CALL_FAILS|BASIC_CALL]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_CLIR_FAILS|CLIR]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_CLNS_FAILS|CLNS]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_CLNS_ONNET_FAILS|CLNS_ONNET]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_CONN_NR_DIFF_FAILS|CONN_NR_DIFF]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_CONN_NR_FAILS|CONN_NR]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_DTMF_FAILS|DTMF]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_EARLY_MEDIA_INBOUND_FAILS|EARLY_MEDIA_INBOUND]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_FAX_AUDIO_FAILS|FAX_AUDIO]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_FAX_T38_FAILS|FAX_T38]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_G711A_ONNET_FAILS|G711A_ONNET]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_G711A_FAILS|G711A]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_G711U_ONNET_FAILS|G711U_ONNET]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_G711U_FAILS|G711U]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_G722_ONNET_FAILS|G722_ONNET]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_G722_FAILS|G722]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_G729_ONNET_FAILS|G729_ONNET]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_G729_FAILS|G729]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_HOLD_RETRIEVE_FAILS|HOLD_RETRIEVE]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_IP_FRAGMENTATION_FAILS|IP_FRAGMENTATION]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_LARGE_SIP_MESSAGES_FAILS|LARGE_SIP_MESSAGES]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_MOBILITY_FAILS|MOBILITY]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_OPUS_NB_FAILS|OPUS_NB]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_OPUS_WB_FAILS|OPUS_WB]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_RALERT_DISC_FAILS|RALERT_DISC]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_REDIR_302_FAILS|REDIR_302]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_REDIR_DIVHDR_FAILS|REDIR_DIVHDR]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_REDIR_HISTHDR_FAILS|REDIR_HISTHDR]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_REVERSE_MEDIA_FAILS|REVERSE_MEDIA]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_SIP_INFO_FAILS|SIP_INFO]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_SRTP_INCOMING_FAILS|SRTP_INCOMING]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_SRTP_INTERNAL_FAILS|SRTP_INTERNAL]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_SRTP_OUTGOING_FAILS|SRTP_OUTGOING]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_XFER_BLIND_FAILS|XFER_BLIND]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_XFER_CONS_ALERT_FAILS|XFER_CONS_ALERT]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_XFER_CONS_EXT_FAILS|XFER_CONS_EXT]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_XFER_CONS_FAILS|XFER_CONS]]</small>
<small>{{SIP_TEST_FACTS_LIST}} [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_180_RINGING_FAILS|180_RINGING]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_BASIC_CALL_FAILS|BASIC_CALL]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_CLIR_FAILS|CLIR]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_CLNS_FAILS|CLNS]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_CLNS_ONNET_FAILS|CLNS_ONNET]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_CONN_NR_DIFF_FAILS|CONN_NR_DIFF]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_CONN_NR_FAILS|CONN_NR]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_CONN_NR_INCOMING_FAILS|CONN_NR_INCOMING]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_DTMF_FAILS|DTMF]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_EARLY_MEDIA_INBOUND_FAILS|EARLY_MEDIA_INBOUND]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_FAX_AUDIO_FAILS|FAX_AUDIO]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_FAX_T38_FAILS|FAX_T38]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_FAX_T38_ONNET_FAILS|FAX_T38_ONNET]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_FAX_T38ANDAUDIO_FAILS|FAX_T38ANDAUDIO]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_G711A_ONNET_FAILS|G711A_ONNET]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_G711A_FAILS|G711A]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_G711U_ONNET_FAILS|G711U_ONNET]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_G711U_FAILS|G711U]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_G722_ONNET_FAILS|G722_ONNET]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_G722_FAILS|G722]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_G729_ONNET_FAILS|G729_ONNET]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_G729_FAILS|G729]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_HOLD_RETRIEVE_FAILS|HOLD_RETRIEVE]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_IP_FRAGMENTATION_FAILS|IP_FRAGMENTATION]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_LARGE_SIP_MESSAGES_FAILS|LARGE_SIP_MESSAGES]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_MOBILITY_FAILS|MOBILITY]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_OPUS_NB_FAILS|OPUS_NB]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_OPUS_WB_FAILS|OPUS_WB]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_RALERT_DISC_FAILS|RALERT_DISC]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_REDIR_302_FAILS|REDIR_302]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_REDIR_DIVHDR_FAILS|REDIR_DIVHDR]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_REDIR_HISTHDR_FAILS|REDIR_HISTHDR]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_REVERSE_MEDIA_FAILS|REVERSE_MEDIA]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_SIP_INFO_FAILS|SIP_INFO]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_SRTP_INCOMING_FAILS|SRTP_INCOMING]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_SRTP_INTERNAL_FAILS|SRTP_INTERNAL]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_SRTP_OUTGOING_FAILS|SRTP_OUTGOING]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_XFER_BLIND_FAILS|XFER_BLIND]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_XFER_CONS_ALERT_FAILS|XFER_CONS_ALERT]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_XFER_CONS_EXT_FAILS|XFER_CONS_EXT]], [[Template:SIP_TEST_FACT_DESCRIPTION_TEST_XFER_CONS_FAILS|XFER_CONS]]</small>


=== {{SIP_TEST_ISSUES_MR_TITLE}} ===
=== {{SIP_TEST_ISSUES_MR_TITLE}} ===
Line 43: Line 44:


; Clip No Screening (CLNS) : {{Template:SIP_Profile_Test_CLNS_no}} {{Template:SIP_Profile_Test_CLNS_REDIRECT_no_clns_at_all}}
; Clip No Screening (CLNS) : {{Template:SIP_Profile_Test_CLNS_no}} {{Template:SIP_Profile_Test_CLNS_REDIRECT_no_clns_at_all}}
; COLP : {{Template:SIP_Profile_Test_COLP_out_yes_in_no}}{{Template:SIP_Profile_Test_COLP_diff_no}}


; Early-Media : {{Template:SIP_Profile_Test_EARLY_MEDIA_INBOUND_yes}}
; Early-Media : {{Template:SIP_Profile_Test_EARLY_MEDIA_INBOUND_yes}}
Line 82: Line 85:


; Clip No Screening (CLNS) : {{Template:SIP_Profile_Test_CLNS_no}} {{Template:SIP_Profile_Test_CLNS_REDIRECT_no_clns_at_all}}
; Clip No Screening (CLNS) : {{Template:SIP_Profile_Test_CLNS_no}} {{Template:SIP_Profile_Test_CLNS_REDIRECT_no_clns_at_all}}
; COLP : {{Template:SIP_Profile_Test_COLP_out_yes_in_no}}{{Template:SIP_Profile_Test_COLP_diff_no}}


; Early-Media : {{Template:SIP_Profile_Test_EARLY_MEDIA_INBOUND_yes}}
; Early-Media : {{Template:SIP_Profile_Test_EARLY_MEDIA_INBOUND_yes}}
Line 106: Line 111:
==Configuration==
==Configuration==
Use profile ''IT-Telmekom-SIP_Trunk'' in ''Gateway/Interfaces/SIP'' to configure this SIP provider.
Use profile ''IT-Telmekom-SIP_Trunk'' in ''Gateway/Interfaces/SIP'' to configure this SIP provider.
 
: {{SIP_TEST_V12_HINT}}
== Disclaimer ==
== Disclaimer ==
{{SIP_TEST_PREFACE}}
{{SIP_TEST_PREFACE}}

Revision as of 16:47, 20 January 2017

Summary

Tests for the SIP_Trunk SIP trunk product of the provider Telmekom were completed. Test results have been last updated on January 20th, 2017. Check the history of this article for the date of the first publication of the testreport. <internal>Provider SBC: TELES-SBC</internal>


List of Issues found in no media-relay Configuration

This is a list of all issues found in a configuration where the media stream between endpoints and the SIP provider - as opposed to the signalling - is not routed through the SBC.

CLNS
Outgoing calls cannot be sent with a foreign calling party number (CLI).
CLNS ONNET
Onnet-Calls (that is, within the provider's network) do not allow foreign calling party numbers (CGPN). In other words, clip no screening is not possible for on-net calls.
CONN NR INCOMING
Incoming calls from the PSTN don't show a correct connected number to the calling party.
MOBILITY
The provider can not send DTMF signals via SIP-INFO messages.
RALERT DISC
Call disconnected by far end during alert does not disconnect locally
Our tests of this feature have shown unstable results (that is, the feature sometimes worked and sometimes did not). This may for example be caused by different equipment used at the provider side (e.g. media gateways) which behave differently.
REDIR 302
The provider does not support external call redirection using the SIP 302 Redirect response
REDIR DIVHDR
The provider does not support maintaining the original caller ID for redirected calls (e.g. CFU) when the original caller is present in a Diversion: header.
REDIR HISTHDR
The provider does not support maintaining the original caller ID for redirected calls (e.g. CFU) when the original caller is present in a History-Info: header.
SIP INFO
The provider does not support conveying DTMF using the SIP-INFO method.

Here is the list of test-cases that have been performed for this provider: 180_RINGING, BASIC_CALL, CLIR, CLNS, CLNS_ONNET, CONN_NR_DIFF, CONN_NR, CONN_NR_INCOMING, DTMF, EARLY_MEDIA_INBOUND, FAX_AUDIO, FAX_T38, FAX_T38_ONNET, FAX_T38ANDAUDIO, G711A_ONNET, G711A, G711U_ONNET, G711U, G722_ONNET, G722, G729_ONNET, G729, HOLD_RETRIEVE, IP_FRAGMENTATION, LARGE_SIP_MESSAGES, MOBILITY, OPUS_NB, OPUS_WB, RALERT_DISC, REDIR_302, REDIR_DIVHDR, REDIR_HISTHDR, REVERSE_MEDIA, SIP_INFO, SRTP_INCOMING, SRTP_INTERNAL, SRTP_OUTGOING, XFER_BLIND, XFER_CONS_ALERT, XFER_CONS_EXT, XFER_CONS

List of Issues found in media-relay Configuration

This section lists the results that differ from the results for the first configuration.

MOBILITY
This feature, which does not work in the first configuration, works fine in the second configuration.


Test Results

This section explains the test results for all possible configurations in more detail.

Configuration without media-relay

Registration
The provider supports UDP and TCP as transport protocol. The tests were completed using TCP, since UDP is an unreliable protocol and requires all involved network elements to support IP-fragmentation.
NAT Traversal
The provider detects clients behind NAT and can handle calls to them without requiring the clients to use NAT-traversal methods like STUN.
DTMF (RFC2833)
The provider can convey DTMF digits using the RTP payload method as per RFC2833.
Session Timer
The tests regarding the SIP-session timer were successful. This means that either no session expiry is used or that it is used and works. It does not imply that session expiry actually is used.
Redundancy
Registration of two SIP-interfaces on the same SIP-account is not supported by the provider. As a result, you cannot have a Standby gateway/PBX using the same account for failover or load-balancing purposes.
Correct signalling of Ringing-state
OK
An outgoing call that is disconnected by the far end during alert is not disconnected locally. Typically, the provider may play a message to the effect that the call has been rejected or the call can not be completed so that the calling user will hang up. This may be OK, however, it may create issues with automated calls (e.g. fax or modem) which do not listen to the announcement and keep waiting for the far end to accept the call.
CLIR
OK
Clip No Screening (CLNS)
CLIP no screening (CLNS) is not possible, that is, outgoing calls can only have the own subscriber number (or extension), no foreign numbers as calling line id. This affects for example externally forwarded and mobility calls.
Also, there is no other method available for this provider to make sure externally forwarded calls will show proper calling line identification (CLI). In this case, we recommend to set the Set Calling = Diverting No check-mark in the PBX Trunk object. This way, the forwarded call will at least carry the diverting party number (DGPN) as calling party number (CGPN/CLI) when alerting at the forwarded-to target. Otherwise it would either show no CLI at all or the lowest subscriber number associated with the trunk only.
COLP
Outbound calls to the PSTN show the correct connected number. However incoming calls from the PSTN do not.
A caller from the PSTN will receive an incorrect connected number that differs from the dialled number. This might lead to the caller cancelling the call.
For outbound calls to the PSTN, an update of the connected number is not signalled to the caller.
Early-Media
The provider supports early-media for outbound calls (hence inbound early media) to the PSTN.
Fax
Transport of faxes to/from the PSTN via G.711 codec was tested successfully.
Additionally transport of faxes to/from the PSTN using the T.38 protocol was tested successfully. This is important for the innovaphone Fax-server. Even if the provider supports T.38, it is not guaranteed that all Fax-calls use T.38. However each call using T.38 will save you 2 DSP-licenses on the gateway hosting the Fax-interface.
Codecs
supported to/from PSTN: G711A and G729
supported onnet (VoIP to VoIP): G711A, G711U, G722 and G729
IP-Fragmentation
OK
Large SIP messages
OK
Reverse Media Negotiation
OK
Mobility Calls
Transmitting DTMF-tones as SIP-INFO messages is not supported. In a no-media-relay configuration, DTMF signalling can thus not be conveyed to the PBX. Mobility calls will not work.
Neither Clip no screening (CLNS) nor call redirection using the SIP Diversion: or History-Info is supported. Calls forwarded to mobility devices will thus not have the original callers calling line id (CLI). In this case, we recommend to set the Set Calling = Diverting No check-mark in the PBX Trunk object. This way, the mobility call will at least carry the mobility user's own extension as calling party number (CGPN/CLI) when alerting at the mobile device. Otherwise it would either show no CLI at all or the lowest subscriber number associated with the trunk only.
SRTP
The provider does not support audio encryption using SRTP.
Call Transfer
OK


Configuration with media-relay

Registration
The provider supports UDP and TCP as transport protocol. The tests were completed using TCP, since UDP is an unreliable protocol and requires all involved network elements to support IP-fragmentation.
NAT Traversal
The provider detects clients behind NAT and can handle calls to them without requiring the clients to use NAT-traversal methods like STUN.
DTMF (RFC2833)
The provider can convey DTMF digits using the RTP payload method as per RFC2833.
Session Timer
The tests regarding the SIP-session timer were successful. This means that either no session expiry is used or that it is used and works. It does not imply that session expiry actually is used.
Redundancy
Registration of two SIP-interfaces on the same SIP-account is not supported by the provider. As a result, you cannot have a Standby gateway/PBX using the same account for failover or load-balancing purposes.
Correct signalling of Ringing-state
OK
An outgoing call that is disconnected by the far end during alert is not disconnected locally. Typically, the provider may play a message to the effect that the call has been rejected or the call can not be completed so that the calling user will hang up. This may be OK, however, it may create issues with automated calls (e.g. fax or modem) which do not listen to the announcement and keep waiting for the far end to accept the call.
CLIR
OK
Clip No Screening (CLNS)
CLIP no screening (CLNS) is not possible, that is, outgoing calls can only have the own subscriber number (or extension), no foreign numbers as calling line id. This affects for example externally forwarded and mobility calls.
Also, there is no other method available for this provider to make sure externally forwarded calls will show proper calling line identification (CLI). In this case, we recommend to set the Set Calling = Diverting No check-mark in the PBX Trunk object. This way, the forwarded call will at least carry the diverting party number (DGPN) as calling party number (CGPN/CLI) when alerting at the forwarded-to target. Otherwise it would either show no CLI at all or the lowest subscriber number associated with the trunk only.
COLP
Outbound calls to the PSTN show the correct connected number. However incoming calls from the PSTN do not.
A caller from the PSTN will receive an incorrect connected number that differs from the dialled number. This might lead to the caller cancelling the call.
For outbound calls to the PSTN, an update of the connected number is not signalled to the caller.
Early-Media
The provider supports early-media for outbound calls (hence inbound early media) to the PSTN.
Fax
Transport of faxes to/from the PSTN via G.711 codec was tested successfully.
Additionally transport of faxes to/from the PSTN using the T.38 protocol was tested successfully. This is important for the innovaphone Fax-server. Even if the provider supports T.38, it is not guaranteed that all Fax-calls use T.38. However each call using T.38 will save you 2 DSP-licenses on the gateway hosting the Fax-interface.
Codecs
supported to/from PSTN: G711A and G729
supported onnet (VoIP to VoIP): G711A, G711U, G722 and G729
IP-Fragmentation
OK
Large SIP messages
OK
Reverse Media Negotiation
OK
Mobility Calls
Transmitting DTMF-tones as SIP-INFO messages is not supported, however mobility calls are still possible as in the media-relay configuration, the SBC will convey DTMF signalling to the PBX.
Neither Clip no screening (CLNS) nor call redirection using the SIP Diversion: or History-Info is supported. Calls forwarded to mobility devices will thus not have the original callers calling line id (CLI). In this case, we recommend to set the Set Calling = Diverting No check-mark in the PBX Trunk object. This way, the mobility call will at least carry the mobility user's own extension as calling party number (CGPN/CLI) when alerting at the mobile device. Otherwise it would either show no CLI at all or the lowest subscriber number associated with the trunk only.
SRTP
The provider does not support audio encryption using SRTP.
Call Transfer
OK


Configuration

Use profile IT-Telmekom-SIP_Trunk in Gateway/Interfaces/SIP to configure this SIP provider.

A most recent v12r2 firmware or higher is required to use this SIP-profile. For hints regarding upgrade to v12r2, see Howto:Firmware Upgrade V12r1 V12r2

New profiles are added in the course of our V12R2 software Service Releases, see Support:DVL-Roadmap Firmware 12r2. Here is an up to date list of tested SIP providers.

Disclaimer

These tests look at a number of interoperability scenarios between innovaphone SIP devices and a given SIP trunk product. As we are enhancing our testing procedures, nature and number of these tests will vary.

All test results document the fact how the tested combination performs in the tested scenario. It explicitly does not comment on the question what the reason is for the behaviour nor if and how it could be changed. It thus does not imply that either the SIP trunk provider or the innovaphone device fails in any way. It merely says that the combination does not perform as defined by the test.

If not mentioned otherwise, all tests are repeated on a weekly basis (a.k.a. nightly tests) using the then-current innovaphone firmware. If a tested combination keeps performing differently from the state documented here during nightly tests, we reserve the right to update this article accordingly.

Some tests do not have consistent results. This may occur for various reasons. If so, we document the tests result as being unstable.

Some of the tested SIP trunk products are not available for nightly tests. In this case, the fact will be noted in the Summary section.

Retrieved from "https://wiki.innovaphone.com/index.php?title=Howto:IT_-_Telmekom_-_SIP_Trunk_SIP-Provider_(2016)&oldid=45556"