Howto:I have a IP-202 that seemed to fail during firmware . Red lamp is on, notheing else. I have been told that GWload should help. But in the description, it tels you to start with a "long reset". There

From innovaphone wiki
Revision as of 13:12, 23 April 2008 by Afi (talk | contribs) (→‎Related Articles)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Press the ALT button while powering on the IP200/202. Keep it pressed for a while (10 seconds).


Related Articles

Howto:How to Reset IPXXX , factory default, led behaviour, tftp mode,clear config,gwload

Howto:How_to_use_gwload

Retrieved from "https://wiki.innovaphone.com/index.php?title=Howto:I_have_a_IP-202_that_seemed_to_fail_during_firmware_._Red_lamp_is_on,_notheing_else._I_have_been_told_that_GWload_should_help._But_in_the_description,_it_tels_you_to_start_with_a_%22long_reset%22._There&oldid=9289"