|
FIXME: Note: Article - Name should be Howto:Productname-SIP-provider-compatibility-test. It is important that the productname is in the article title and not the provider name or country-a provider could have different products or the same product in more countries
|
Innovaphone Compatibility Test Report
Summary
SIP Provider: Ippi
Current test state
Testing Enviroment
This scenario describes a setup where the PBX and phones are in a private network.
There are 3 major configuration variants of the SIP trunk, which one is used depends on the test results. The variants are:
- the SIP trunk is configured without Media Relay and without exclusive coder. This is the case if all tests were successful
- the SIP trunk is configured with Media Relay and STUN but without exclusive coder. This is the case when the test for "NAT Traversal" fails
- the SIP trunk is configured with Media Relay and exclusive coder. This is the case when the test for "Reverse Media Negotiation" fails
The test scenario should describe which SIP trunk configuration is needed.
Test Results
For more information on the test procedure, please read the following wiki article: SIP Interop Test Description. Bold lines in the test results indicate a KO-criteria.
|
|
FIXME: Note: Possible test results are Ok, Nok, Not tested, N/A(not available). Ok, Nok, N/A are self explanatory. "Not tested" is more a temporary note - if its still in the test after finishing, then the summary should explain why the feature was not tested. Remove this note in the final report
|
Basic Call
| Tested feature
|
Result
|
| call using g711a
|
Yes
|
| call using g711u
|
Yes
|
| call using g723
|
Yes
|
| call using g729
|
Yes
|
| call using g722
|
No
|
| Overlapped sending
|
No
|
| early media channel
|
Yes
|
| Fax using T.38
|
|
| Reverse Media Negotiation
|
Yes
|
| CGPN can be suppressed
|
Yes
|
| CLIP no screening
|
Nok
|
| Long time call possible(>30 min)
|
|
| External Transfer
|
|
| NAT Detection
|
Yes
|
| Redundancy
|
|
| SIP over TCP
|
Yes
|
| Voice Quality OK?
|
Yes
|
Direct Dial In
| Tested feature
|
Result
|
| Inbound(Provider -> Innovaphone)
|
|
| Outbound(Innovaphone -> Provider)
|
|
| Loop In call(Innovaphone -> Provider -> Innovaphone)
|
|
DTMF
| Tested feature
|
Result
|
| DTMF tones sent correctly
|
|
| DTMF tones sent correctly via SIP-Info
|
|
| DTMF tones received correctly
|
|
Hold/Retrieve
| Tested feature
|
Result
|
| Call can be put on hold
|
|
| Held end hears music on hold / announcement from PBX
|
|
Transfer with consultation
| Tested feature
|
Result
|
| Call can be transferred
|
|
| Held end hears music on hold
|
|
The following tests are made to test if call transfer is working.
| Tested feature
|
Voice Ok?
|
MoH Ok?
|
| inno1 calls inno2. inno2 transfers to sip-provider-phone.
|
|
|
| inno1 calls sip-provider-phone. inno1 transfers to inno2.
|
|
|
| inno1 calls sip-provider-phone. sip-provider-phone transfers to inno2.
|
|
|
| sip-provider-phone calls inno1. inno1 transfers to inno2.
|
|
|
| sip-provider-phone calls inno1. sip-provider-phone transfers to inno2.
|
|
|
Transfer with consultation (alerting only)
| Tested feature
|
Result
|
| Call can be transferred
|
|
| Held end hears music on hold or dialling tone
|
|
| Call returns to transferring device if the third
Endpoint is not available
|
|
The following tests are made to test if call transfer is working.
| Tested feature
|
Voice Ok?
|
MoH Ok?
|
| inno1 calls inno2. inno2 transfers to sip-provider-phone.
|
|
|
| inno1 calls sip-provider-phone. inno1 transfers to inno2.
|
|
|
| inno1 calls sip-provider-phone. sip-provider-phone transfers to inno2.
|
|
|
| sip-provider-phone calls inno1. inno1 transfers to inno2.
|
|
|
| sip-provider-phone calls inno1. sip-provider-phone transfers to inno2.
|
|
|
Blind Transfer
| Tested feature
|
Result
|
| Call can be transferred
|
|
| Held end hears dialling tone
|
|
The following tests are made to test if call transfer is working.
| Tested feature
|
Voice Ok?
|
| inno1 calls inno2. inno2 transfers to sip-provider-phone.
|
|
| inno1 calls sip-provider-phone. inno1 transfers to inno2.
|
|
| inno1 calls sip-provider-phone. sip-provider-phone transfers to inno2.
|
|
| sip-provider-phone calls inno1. inno1 transfers to inno2.
|
|
| sip-provider-phone calls inno1. sip-provider-phone transfers to inno2.
|
|
CFU / CFB Transfer
| Tested feature
|
Result
|
| Call can be forward
|
|
| Held end hears dialling tone
|
|
CFNR / Blind Transfer (alerting only)
| Tested feature
|
Result
|
| Call can be transferred or forward
|
|
| Held end hears dialling tone
|
|
The following tests are made to test if call transfer is working.
| Tested feature
|
Voice Ok?
|
| inno1 calls inno2. inno2 transfers to sip-provider-phone.
|
|
| inno1 calls sip-provider-phone. sip-provider-phone transfers to inno2.
|
|
| sip-provider-phone calls inno1. inno1 transfers to inno2.
|
|
Broadcast Group & Waiting Queue
| Tested feature
|
Result
|
| Caller can make a call to a Broadcast Group
|
|
| Caller can make a call to a Waiting Queue
|
|
| Announcement if nobody picks up the call
|
|
Configuration
Firmware version
All innovaphone devices use Vx build xx-xxxxx as firmware.
SIP - Trunk
Number Mapping
Route Settings
Media Relay
Fax
