Howto:NL - MOTTO - VaMo Configuration: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
Line 8: | Line 8: | ||
Create a new user object. | Create a new user object. | ||
Description: Motto VaMo | |||
Long Name: Name of the user | |||
Display Name: Name of the user | |||
Name: (international format of the mobile number example: 31612345678) | |||
Number: (extension number for this user) | |||
Password: (password for the SIP registration) | |||
Hardware Id: (international format of the mobile number example: 31612345678) | |||
PBX password: On | |||
Line 23: | Line 22: | ||
On he SBC create a net Session Border object for the SIM: | On he SBC create a net Session Border object for the SIM: | ||
Long Name: Name of the user | |||
Password: (password for the SIP registration) | |||
Media Relay: On | |||
Gatekeeper Id: ID of the PBX | |||
Primary Adr: IP of the PBX | |||
Name: (international format of the mobile number example: 31612345678) | |||
PBX Password: On | PBX Password: On | ||
Name: (extension number for this user) | Name: (extension number for this user) | ||
PBX Password: Off | PBX Password: Off | ||
TLS Only: Off | TLS Only: Off | ||
Press OK | |||
Line 49: | Line 46: | ||
'''Motto Flux portal SIM card settings:''' | '''Motto Flux portal SIM card settings:''' | ||
Device: SIM card | |||
Registration server: IP or DNS name of the Session Border Controller. | |||
SRV option (disabled) | |||
Port: 5060 (SIP port) | |||
From user: (extension of the user object) | |||
Username: (international format of the mobile number example: 31612345678) | |||
Password: (password of the user object) | Password: (password of the user object) | ||
DTMF signaling mode: auto | |||
Register the SIM. | Register the SIM. | ||
Check the registration on the SBC and PBX using the logging. | Check the registration on the SBC and PBX using the logging. | ||
Adjust the settings on the portal to route calls to the PBX / mobile or scheduled mixed. | Adjust the settings on the portal to route calls to the PBX / mobile or scheduled mixed. |
Revision as of 09:52, 26 April 2019
NL Motto VaMo configuration.
This configuration if for registering a Motto Sim card to the PBX using a Innovaphone Session Border Controller.
PBX configuration:
Create a new user object.
Description: Motto VaMo Long Name: Name of the user Display Name: Name of the user Name: (international format of the mobile number example: 31612345678) Number: (extension number for this user) Password: (password for the SIP registration) Hardware Id: (international format of the mobile number example: 31612345678) PBX password: On
Session Border Controller object setup:
On he SBC create a net Session Border object for the SIM:
Long Name: Name of the user Password: (password for the SIP registration) Media Relay: On Gatekeeper Id: ID of the PBX Primary Adr: IP of the PBX Name: (international format of the mobile number example: 31612345678) PBX Password: On Name: (extension number for this user) PBX Password: Off TLS Only: Off
Press OK
Set Sip config on the PBX and SBC:
Set this option using Maintenance, Diagnostics, Command.
!config add SIP /take-source-addr-as-contact-addr /x-ice-disabled !config write !config activate
reboot the PBX and SBC to be sure these options have been enabled.
Motto Flux portal SIM card settings:
Device: SIM card Registration server: IP or DNS name of the Session Border Controller. SRV option (disabled) Port: 5060 (SIP port) From user: (extension of the user object) Username: (international format of the mobile number example: 31612345678) Password: (password of the user object) DTMF signaling mode: auto
Register the SIM. Check the registration on the SBC and PBX using the logging. Adjust the settings on the portal to route calls to the PBX / mobile or scheduled mixed.