Howto:NL - MOTTO - VaMo Configuration: Difference between revisions
m (→Category) |
mNo edit summary |
||
Line 15: | Line 15: | ||
--> | --> | ||
{{Category:3rdParty PreviousProducts}} | |||
{{Category:3rdParty | [[Category:3rdParty PreviousProducts|{{PAGENAME}}]] | ||
[[Category:3rdParty | |||
==Description== | ==Description== |
Revision as of 13:54, 25 August 2020
Product Name
Motto Sim card
Certification Status
This product is listed due to a customer testimonial. No tests have been conducted by innovaphone.
Vendor test report and configuration hints were received Apr 26th, 2019
Category
This category lists previously tested 3rd party products.
Information about those products may be outdated.
Use of those products in combination with innovaphone is on your responsability.
We always recommend to do tests in your own laboratories with current versions before live operation.
Please note that innovaphone itself does not provide any technical support for products and applications described here. This is exclusively provided by the third-party manufacturers themselves, who can be reached via the contact details mentioned in the articles.
Description
Integrating a normal mobile cellphone or smartphone to your PBX as a SIP-client.
Features
Summary of the features:
- Routing options available in the Flux portal:
- Route calls to the PBX
- Route calls to mobile
- Mixed
- Scheduled
Use the native dialer of your mobile phone for internal and/or external calls to PSTN as it is a normal internal user on the PBX.
Configuration
This configuration is for registering a Motto Sim card to the PBX using a Innovaphone Session Border Controller.
PBX configuration
Create a new user object.
Description: Motto VaMo Long Name: Name of the user Display Name: Name of the user Name: (international format of the mobile number example: 31612345678) Number: (extension number for this user) Password: (password for the SIP registration) Hardware Id: (international format of the mobile number example: 31612345678) PBX password: On
Session Border Controller object setup
On he SBC create a net Session Border object for the SIM:
Long Name: Name of the user Password: (password for the SIP registration) Media Relay: On Gatekeeper Id: ID of the PBX Primary Adr: IP of the PBX Name: (international format of the mobile number example: 31612345678) PBX Password: On Name: (extension number for this user) PBX Password: Off TLS Only: Off
Press OK
Set Sip config on the PBX and SBC
Set this option using Maintenance, Diagnostics, Command.
!config add SIP /take-source-addr-as-contact-addr /x-ice-disabled !config write !config activate
reboot the PBX and SBC to be sure these options have been enabled.
Motto Flux portal SIM card settings
Device: SIM card Registration server: IP or DNS name of the Session Border Controller. SRV option (disabled) Port: 5060 (SIP port) From user: (extension of the user object) Username: (international format of the mobile number example: 31612345678) Password: (password of the user object) DTMF signaling mode: auto
Register the SIM.
Check the registration on the SBC and PBX using the logging.
Adjust the settings on the portal to route calls to the PBX / mobile or scheduled mixed.
Contact
Aaltjan Evink
WH2A B.V.
Gildenveld 63
3892 DD Zeewolde
Flevoland, Nederland
Email: info@wh2a.com
Support: support@wh2a.com
Tel: +31 36 522 7879