Summary
Certification Status
The tests for this product have been completed.
Testing of this product has been finalized September 28th, 2015.
Version
Nista Software Version:
innovaphone Firmware:
Test Setup
Device Setup
Tested feature
|
Result
|
Register Device w/o specific configuration (requires DHCP)
|
Yes
|
DHCP is default
|
No
|
DHCP yields timeserver and time displays correctly
|
Yes
|
SNTP config has TZ string for timezone/dst autoconfig
|
Yes
|
DHCP yields correct default gateway
|
Yes
|
Device supports magic registration (e.g. by serial)
|
N/A
|
Fixed registrations works
|
Yes
|
Device registers w/o Extension (just by name)
|
No
|
Device registers by name with non-latin1 characters (e.g. UserÄÖÜ)
|
No
|
Device registers by extension
|
Yes
|
Device registers with password
|
Yes
|
Device registers multiple identities
|
N/A
|
2nd GK is supported
|
N/A
|
Device supports Redirection of Registration (Master redirects to Slave)
|
No
|
Device supports STUN protocol
|
Yes
|
Device sends NAT - keepalive messages
|
Yes
|
Device refreshes the PBX registration
|
Yes
|
Device supports SIP over TCP
|
No.
|
Device supports SRTP
|
Yes
|
Device supports SIPS (SIP over TLS)
|
No
|
Device supports HTTPS
|
Yes
|
Device supports VAD (Voice activity detection)
|
N/A
|
Device supports Auto-Answer (needed when used with CTI client)
|
Yes
|
Test Results
Basic Call
Tested feature
|
Result with MR
|
call using g711a
|
Yes
|
call using g711u
|
Yes
|
call using g729
|
Yes
|
call using g722
|
Yes
|
Overlapped sending
|
No
|
Device sets up an early media channel for incoming calls
|
No
|
Device sets up an early media channel for outgoing calls
|
No
|
Device shows called id number
|
Yes
|
Device shows called id name
|
Yes
|
Device shows called id display info
|
Yes
|
Fax using T.38
|
N/A
|
CGPN can be suppressed
|
Yes
|
Reverse Media Negotiation
|
Yes
|
Device shows CDPN/CGPN on incoming call
|
Yes
|
Device shows CDPN/CGPN on outgoing call
|
Yes
|
Device shows connected number
|
Yes
|
Device shows diverting number
|
Yes - No answer called divert
|
Device supports distinctive ringing
|
N/A
|
Device supports asymetric codec negotiation
|
N/A
|
Device supports codec renegotiation during a conversation
|
Yes
|
Device shows correct display message in case of busy CDPN
|
N/A
|
Device shows correct display message in case of not existing CDPN
|
N/A
|
Device shows correct display message in case that the call is declined
|
N/A
|
3party conference possible
|
No
|
Device supports display updates during call(needed for Directory Search object)
|
Yes
|
Long Time Call (>30 min) works?
|
Yes
|
Voice Quality OK?
|
Yes
|
DTMF
Tested feature
|
Result
|
DTMF tones sent correctly
|
Yes, (Sip Info,RFC 2833)
|
DTMF tones received correctly
|
Yes, (Sip Info,RFC 2833)
|
Hold/Retrieve
Tested feature
|
Result
|
Device handles incoming hold correctly
|
N/A
|
Device can put a call on hold using correctly(inactive or sendonly)
|
N/A
|
Transfer with consultation
Tested feature
|
Voice Ok?
|
MoH Ok?
|
inno1 calls inno2. inno2 transfers to testphone.
|
Yes
|
Yes
|
inno1 calls inno2. inno1 transfers to testphone.
|
Yes
|
Yes
|
inno1 calls testphone. inno1 transfers to inno2.
|
Yes
|
Yes
|
inno1 calls testphone. testphone transfers to inno2.
|
N/A
|
N/A
|
testphone calls inno1. inno1 transfers to inno2.
|
Yes
|
Yes
|
testphone calls inno1. testphone transfers to inno2.
|
N/A
|
N/A
|
Transfer without consultation (alerting only)
Tested feature
|
Voice Ok?
|
MoH Ok?
|
inno1 calls inno2. inno2 transfers to testphone.
|
Yes
|
Yes
|
inno1 calls inno2. inno1 transfers to testphone.
|
Yes
|
Yes
|
inno1 calls testphone. inno1 transfers to inno2.
|
Yes
|
Yes
|
inno1 calls testphone. testphone transfers to inno2.
|
N/A
|
N/A
|
testphone calls inno1. inno1 transfers to inno2.
|
Yes
|
Yes
|
testphone calls inno1. testphone transfers to inno2.
|
N/A
|
N/A
|
Blind Transfer
Tested feature
|
Voice Ok?
|
inno1 calls inno2. inno2 transfers to testphone.
|
Yes
|
inno1 calls inno2. inno1 transfers to testphone.
|
Yes
|
inno1 calls testphone. inno1 transfers to inno2.
|
Yes
|
inno1 calls testphone. testphone transfers to inno2.
|
N/A
|
testphone calls inno1. inno1 transfers to inno2.
|
Yes
|
testphone calls inno1. testphone transfers to inno2.
|
N/A
|
Blind Transfer (alerting only)
Tested feature
|
Voice Ok?
|
inno1 calls inno2. inno2 transfers to testphone.
|
Yes
|
inno1 calls testphone. testphone transfers to inno2.
|
N/A
|
testphone calls inno1. inno1 transfers to inno2.
|
Yes
|
Other Features
Keys
Tested feature
|
Result
|
Device has speed dial keys
|
Yes
|
Device has programmable function keys
|
N/A
|
Device has partner keys
|
N/A
|
UC Features
Tested feature
|
Result
|
Video calls possible?
|
Yes - Transmit only
|
Video conference possible? (max. amount of participants)
|
N/A
|
Video Codecs
|
H263-1998 / H264
|
enable/disable video during call
|
No
|
Set own presence possible?
|
N/A
|
See presence of others possible?
|
N/A
|
chat with mypbx client possible?
|
N/A
|
chat with same vendor client possible?
|
N/A
|
send IM - messages to phones possible?
|
N/A
|
Configuration
innovaphone configuration
3rd party product configuration
Note: The IP Door Phone Nista IP39-4x series configuration detailed description can be found in the IP Door Phone Nista IP39-4x series user manual document, which is allowed for review and downloading from the Manufacturer-Nista Devices GmbH official web site Downloads page: http://www.nistadevices.com/SitePages/downloads.aspx
a) Web Administration Login Screen; The Default Login Credentials: User Name:admin; Password: 1234
b) Network Parameters Configuration screen
c) SIP Account Configuration screen