Howto:Office Communications Server 2007 - Microsoft - Testreport

General Information

• Product name: Office Communications Server 2007
• Vendor: Microsoft Corporation
• Version: 3.0.6362.0(Eval)
• innovaphone Firmware: v6 SR2 HF2

Current test state

This product is being tested right now. The test is not yet completed.

Configured Scenario

Scenario 1: innovaphone as Gateway only

The IP800 is used as gateway between the ISDN provider and the OCS installation. All PBX functionality is done by the OCS. The interface to the OCS enviroment is done by the Mediation Server.

Important Components

Server Requirements

• Windows 2003 Server SP1 or R2
• IIS 6.0
• .NET framework 2.0
• Active Directory with Exchange 2007

There are additional hardware & software requirements depending on the OCS server role. For more information on this topic please refer to: http://www.microsoft.com/technet/prodtechnol/office/communicationsserver/evaluate/sysreqs/ocs-ee.mspx

Product Setup

Installation & Configuration of the vendor Software

The OCS server can be installed like described by microsoft. You will need to do some adjustments on the mediation server on the mediation server.

To do this adjustments, open the Office Communications Server management interface and open the Mediation Server menue.

In the proprieties menue of your mediation server, open the Next Hop Connections tab. Enter in the PSTN Gateway next hop field the ip address and port number of your innovaphone gateway.

Installation & Configuration of the innovaphone components

The connection to the Mediation Server is done using a Gateway without Registration. In the screenshot below, you will find the correct configuration.

Since the IP800 will work only as media gateway in this scenario, the routing will be pretty simple. The used Gateway without Registration interface will be connected directly to the ISDN interface. Keep in mind to activate the proper flags on the two routes(see screenshot below)

Product Test

Basic Call

Tested feature	Result
call using g711a	YES
call using g711u	YES
call using g723	NO
call using g729	NO
Overlapped sending	NO
Early media channel
Fax using T.38	?
Voice Quality OK?	YES

DTMF

Tested feature	Result
DTMF tones sent correctly	YES
DTMF tones received correctly	YES

Hold/Retrieve

Tested feature	Result
Call can be put on hold
Held end hears music on hold / announcement from PBX

Transfer with consultation

Tested feature	Result
Call can be transfered
Held end hears music on hold
Call returns to transferring device if the third Endpoint is not available

Transfer with consultation (alerting only)

Tested feature	Result
Call can be transfered
Held end hears music on hold or dialing tone
Call returns to transferring device if the third Endpoint is not available

Blind Transfer

Tested feature	Result
Call can be transfered
Held end hears dialing tone

Broadcast Group & Waiting Queue

Tested feature	Result
Caller can make a call to a Broadcast Group
Caller can make a call to a Waiting Queue
Announcement if nobody picks up the call

Minor Bugs

• Problem1