Howto:SeaCom Maritime Telephones - Seacom - 3rd Party Product: Difference between revisions

From innovaphone wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 53: Line 53:


==Testing==
==Testing==
Using the SeaCom telephones with the Innovaphone analogue ports have NOT been tested in the laboratory of SeaCom YET.  
SeaCom telephones are tested in the lab with the Innovaphone IP311 regarding functionality.
Test to be carried our are:
Below functions are verified:
* Line voltage levels
* Line voltage levels
* Loop current level
* Loop current level
* Ringing voltage level and frequency
* Ringing voltage level and frequency
* Call progress tone decoding
* Busy tone decoding
* Ringer activation
* FSK caller ID presentation
* DTMF key signaling
* DTMF key signaling



Revision as of 14:23, 2 May 2019

Seacom logo.png
3rdPartyGoldfischglas 03.png

Product name

SeaCom SC220, SeaCom SC411, SeaCom SC421

Certification status

This product is being tested right now. The test is not yet completed.

Category

Category:3rdParty Terminals

Description

Telephones for maritime environment to be used on bridge, in engine room, on deck and other technical spaces.


The telephones from SeaCom are adapted to the requirements found on ships. They are type approved by DNV-GL for this use, but the design of these telephones makes them usable in any application where robustness, water tightness and salt mist resistance is required. They are analogue telephones to be connected to the Innovaphone gateways using analogue ports.

Functions

  • Hands-free loud-speaking
  • Handset (does not fall off in rolling seas)
  • Intercom style of communication
  • Headset with 10m cable and noise cancelling microphone
  • Relay for driving light/siren alarm device
  • Water tight
  • Salt mist resistant
  • - 25 to +70 dgs operating
  • Red backlight keyboard and display
  • Flush mount for bridge/engine control room consoles

Competitive Analysis

Our telephones are in operation on more than 1000 ships worldwide, and a total of more than 3000 units are sold since 2008. We do not provide a low cost solution, but we have competitive prices when quality and functionality is also taken into account.

Product sheets

Use the links to get our product sheets and data

SC220

SC411

SC421

Use the link for getting the full manual

Testing

SeaCom telephones are tested in the lab with the Innovaphone IP311 regarding functionality. Below functions are verified:

  • Line voltage levels
  • Loop current level
  • Ringing voltage level and frequency
  • Busy tone decoding
  • Ringer activation
  • FSK caller ID presentation
  • DTMF key signaling

Pricing

We do not provide a low cost solution, but we have competitive prices when quality and functionality is also taken into account. Please contact us for prices and quotations

Vendor

Seacom logo.png

SeaCom Aps Søren Frichs Vej 38K DK-8230 Aabyhoj DENMARK [1]

Contact

Carl Johan Jensen

SeaCom Aps

Soren Frichs Vej 38K

DK-8230 Aabyhoj

DENMARK

tel: +45 86296297

mob: +4540186690

mail: info@seacom.dk