Howto:SeaCom Maritime Telephones - Seacom - 3rd Party Product: Difference between revisions

From innovaphone wiki
Jump to navigation Jump to search
No edit summary
Line 12: Line 12:


==Vendor==
==Vendor==
SeaCom Aps  Søren Frichs Vej 38K  DK-8230 Aabyhoj DENMARK
SeaCom Aps  Søren Frichs Vej 38K  DK-8230 Aabyhoj DENMARK [http://www.seacom.dk/]


==Description==
==Description==

Revision as of 15:24, 21 February 2019

Product name

SeaCom SC220, SeaCom SC411, SeaCom SC421

Certification status

Type approved 2018 by DNV-GL for use on seagoing vessels Type approval certificate number: TAA0000054 Rev 1 [1]

Category

Telephones for maritime environment. Telephones to be used on bridge, in engine room, on deck and other technical spaces.

Vendor

SeaCom Aps Søren Frichs Vej 38K DK-8230 Aabyhoj DENMARK [2]

Description

The telephones from SeaCom are adapted to the requirements found on ships. They are type approved by DNV-GL for this use, but the design of these telephones makes them usable in any application where robustness, water tightness and salt mist resistance is required. They are analogue telephones to be connected to the Innovaphone gateways using analogue ports.

Functions

  • Hands-free loud-speaking
  • Handset (does not fall off in rolling seas)
  • Intercom style of communication
  • Headset with 10m cable and noise cancelling microphone
  • Relay for driving light/siren alarm device
  • Water tight
  • Salt mist resistant
  • - 25 to +70 dgs operating
  • Red backlight keyboard and display
  • Flush mount for bridge/engine control room consoles

Competitive Analysis

Our telephones are in operation on more than 1000 ships worldwide, and a total of more than 3000 units are sold since 2008. We do not provide a low cost solution, but we have competitive prices when quality and functionality is also taken into account.

Product sheets

Use the links to get our product sheets and data

SC220 [3]

SC411 [4]

SC421 [5]

Use the link for getting the full manual [6]

Testing

Using the SeaCom telephones with the Innovaphone analogue ports have NOT been tested in the laboratory of SeaCom YET. Test to be carried our are:

  • Line voltage levels
  • Loop current level
  • Ringing voltage level and frequency
  • Call progress tone decoding
  • DTMF key signaling

Pricing

We do not provide a low cost solution, but we have competitive prices when quality and functionality is also taken into account. Please contact us for prices and quotations

Contact

Carl Johan Jensen

SeaCom Aps

Soren Frichs Vej 38K

DK-8230 Aabyhoj

DENMARK

tel: +45 86296297

mob: +4540186690

mail: info@seacom.dk