View source for Howto:Send Email from the innovaphone Voicemail without saving data on the CF

==Applies To==
This information applies to

innovaphone PBX V9

<!-- Keywords: Email, caller notification, no saving messages, Voicemail, vm -->

==More Information==
How to convert a voicemail in an email is described in the related Wiki article. Some customer anyway don’t want to save the voice messages on the CF. In fact after transmitting the audio file to the Email server the audio file is still there and saved on the CF, and if you check your voice mails using the phone you will hear that there are x new messages. 

If you add just two lines in the script no files will be saved anymore on the CF, so the messages are just transmitted to your Email account.  

But be aware that Email is unsafe, and if for any reason the Email is not successfully transmitted the message is lost.

This info will show you how to modify the ''VM.xml'' script file.

===Configuration===
Copy the file to your PC and open it with the editor. Do the modifications as show, save the file and copy it back. Try it, done.

The modification is at the end of the script, around line 886 (depending on the version of the script, the exact line may differ). In this region you will see the following code:

<syntaxhighlight lang="html5">
 <event type="call-end">
   <if cond="$vm">
      <store-get root="" name="email.xml" out-url="$suburl" />
      <call name="Subscript"/>
   </if>
 </event>
</syntaxhighlight>

Enter just the following two additional lines:

<syntaxhighlight lang="html5">
<assign out="$url" value="$vm"/> 
<store-del url="$url"/> 
</syntaxhighlight>


in this way:


<syntaxhighlight lang="html5">
 <event type="call-end">
   <if cond="$vm">
      <store-get root="" name="email.xml" out-url="$suburl" />
      <call name="Subscript"/>
      <assign out="$url" value="$vm"/> 
      <store-del url="$url"/> 
   </if>
 </event>
</syntaxhighlight>

Now no more message files are stored on the CF.

You can also disable the message waiting indication shown on the phone if this is annoying for the users reading their voice messages via email.  For this, you need to remove the call to 
<syntaxhighlight lang="html5">
<pbx-mwi/>
</syntaxhighlight>
(this should be around line 58).

===Known Problems===
If the Email fails, no message.


== Related Articles ==
[[Howto:Configure_the_innovaphone_Voicemail]]
[[Category:Howto|{{PAGENAME}}]]