Howto:Step-by-step faxserver installation
Jump to navigation
Jump to search
This documents explains a step-by-step installation of the Faxserver on the innovaphone Linux Application Platform.
Applies To
This information applies to the innovaphone firmware V10 final and innovaphone Linux application Faxserver V10 final.
Installation
- If the innovaphone Linux Application Platform is not yet running, install it with this instructions.
- Download the latest Faxserver application file here and upload it to the innovaphone Linux Application Platform:
Configuration
- Add a PBX Gateway object with a number and the enabled prefix option.
- If there is not yet a TAPI login in the PBX, add a PBX User object for it with at least group CF rights and a set password.
- The TAPI login and the gateway object must be in the same group and the TAPI login object must have active group notifications:
- Add the registration in the Gateway FAX interface to the PBX Gateway object with the enabled T.38 option:
- Add the HTTP login credentials for the Faxserver Webdav folder at the HTTP client:
- Configure at least one email address for each user:
- And enable the fax license for each user which is allowed to send or receive fax documents:
- Add a new faxserver configuration at the faxserver application with the add link:
- Enter the server specific issues:
- Enter the SMTP authentication credentials to send an email to the internal mail server, the faxserver domain and an administrator email address:
- Enter the PBX-SOAP and gateway object informations. Please test the connection with the Connection Test button:
- Enter fax specific configurations. The subscriber id includes the fax gateway object number:
- Send an email to the faxserver as SMTP server with SMTP authorisation with the recipient address public number@fax server domain.
- This fails if the innovaphone-linux certificate is not yet trusted. Trust it at the innovaphone device:
