Howto:V6 and V7 on IP21, IP200 (old), IP202 and IP400: Difference between revisions
m (→More Information: Tabelle hinzugefügt) |
|||
| Line 21: | Line 21: | ||
If you have an IP202 with 8MB Ram and 4 MB Flash (newer generation) you can run it with V6 | If you have an IP202 with 8MB Ram and 4 MB Flash (newer generation) you can run it with V6. | ||
Revision as of 10:46, 26 October 2007
Summary
Running V6 PBX on IP202 ,IP400 and IP21
Applies To
This information applies to
- IP400
- IP21
- IP202
More Information
Due to memory reasons it is not possible to run V6 PBX on IP400, IP21 and IP202 with 8 MB Ram and 2MB Flash.
V6 Gateway/Gatekeeper (Protocols H.323/SIP) – aka “Relay” will still work on IP400 and IP21, but it is not possible to run V6 Pbx on IP202 with 8MB Ram and 2 MB Flash.
With V6 you can run the IP202 with 8 MB Ram and 2 MB Flash only as Phone.
If you have an IP202 with 8MB Ram and 4 MB Flash (newer generation) you can run it with V6.
V6 Pbx requires minimum 4 MB Flash because of firmware image, VARS and directory and min. 8Mb RAM because the V6 Pbx Code needs for itself min. of 4 MB RAM.
You can check the size of Flash/Ram at the Webinterface of your unit (General -> Info). There you'll see a line like this "Version V5.01 sr1-hotfix IP202[05-5874], Bootcode[336], HW[224] 4096/8192". The two numbers after HW[224] describe the size of the Flash/Ram. In this example the unit got a 4 MB Flash and a 8 MB Ram.
| V5 Gateway and PBX | V6 Gateway | V6 PBX | |
|---|---|---|---|
| IP21 | Yes | Yes | No |
| IP400 | Yes | Yes | No |
| IP202 with 2MB Flash | Yes | Yes | No |
| IP202 with 4MB Flash | Yes | Yes | Yes (up to V6 SR1 Hotfix2) |