Howto:V6 and V7 on IP21, IP200 (old), IP202 and IP400: Difference between revisions
No edit summary |
|||
| Line 1: | Line 1: | ||
Due to flash and dram memory limitations, full the V6 feature set is not available on some older innovaphone platforms. You should generally consider replacing IP400 by IP305, as well as IP202 by a combination of IP110/IP200 and IP302. | |||
==Applies To== | ==Applies To== | ||
| Line 6: | Line 5: | ||
* IP400 | * IP400 | ||
* IP21 | * IP21 | ||
* IP200 (the old one, not IP200A, see label on the back) | |||
* IP202 | * IP202 | ||
==More Information== | ==More Information== | ||
=== Running V6 up to and including V6 SR1 === | |||
On all IP400, all IP21 and IP202 with 8 MB Ram and 2MB Flash (see the info screen for details on how much memory your IP202 features), the V6 PBX will not run. The IP400 and IP21 firmware thus does not include the PBX at all. | |||
V6 | For the IP202, there are 2 downloads available, '''ip202.bin''' which includes the PBX and '''ip202phone.bin''' which does not. '''ip202.bin''' will not work on older IP202 platforms with only 2MB flash memory. | ||
The V6 Gateway/Gatekeeper - aka “Relay” - will still work on IP400 and IP21, but not on the smaller IP202 (in fact, the '''ip202phone.bin''' is identical to the '''ip200.bin'''). | |||
You can check the size of | You can check the size of flash/dram at the webinterface of your unit (General -> Info). A line like '''Version V5.01 sr1-hotfix IP202[05-5874], Bootcode[336], HW[224] ''4096''/''8192''''' indicates 4MB flash and 8MB dram. | ||
<center> | <center> | ||
| Line 58: | Line 48: | ||
|} | |} | ||
</center> | </center> | ||
=== Running V6 SR2 === | |||
From V6 SR2, there are addtional limitations. | |||
The IP200 (not IP200A) will include neither PPP nor NAT (this no PPTP and PPPoE either). The phone can thus not be used as a router anymore. | |||
The IP400 does not include PPP (and this PPTP and PPPoE), NAT, Telnet, Update, Aping, TCP-SIP und - as before - the PBX. | |||
Revision as of 09:22, 18 February 2008
Due to flash and dram memory limitations, full the V6 feature set is not available on some older innovaphone platforms. You should generally consider replacing IP400 by IP305, as well as IP202 by a combination of IP110/IP200 and IP302.
Applies To
This information applies to
- IP400
- IP21
- IP200 (the old one, not IP200A, see label on the back)
- IP202
More Information
Running V6 up to and including V6 SR1
On all IP400, all IP21 and IP202 with 8 MB Ram and 2MB Flash (see the info screen for details on how much memory your IP202 features), the V6 PBX will not run. The IP400 and IP21 firmware thus does not include the PBX at all. For the IP202, there are 2 downloads available, ip202.bin which includes the PBX and ip202phone.bin which does not. ip202.bin will not work on older IP202 platforms with only 2MB flash memory.
The V6 Gateway/Gatekeeper - aka “Relay” - will still work on IP400 and IP21, but not on the smaller IP202 (in fact, the ip202phone.bin is identical to the ip200.bin).
You can check the size of flash/dram at the webinterface of your unit (General -> Info). A line like Version V5.01 sr1-hotfix IP202[05-5874], Bootcode[336], HW[224] 4096/8192 indicates 4MB flash and 8MB dram.
| V5 Gateway and PBX | V6 Gateway | V6 PBX | |
|---|---|---|---|
| IP21 | Yes | Yes | No |
| IP400 | Yes | Yes | No |
| IP202 with 2MB Flash | Yes | Yes | No |
| IP202 with 4MB Flash | Yes | Yes | Yes |
Running V6 SR2
From V6 SR2, there are addtional limitations.
The IP200 (not IP200A) will include neither PPP nor NAT (this no PPTP and PPPoE either). The phone can thus not be used as a router anymore.
The IP400 does not include PPP (and this PPTP and PPPoE), NAT, Telnet, Update, Aping, TCP-SIP und - as before - the PBX.