Howto:V6 and V7 on IP21, IP200 (old), IP202 and IP400

From innovaphone wiki
Jump to navigation Jump to search

Summary

Running V6 PBX on IP202 ,IP400 and IP21

Applies To

This information applies to

  • IP400
  • IP21
  • IP202


More Information

Due to memory reasons it is not possible to run V6 PBX on IP400, IP21 and IP202 with 8 MB Ram and 2MB Flash.

Normal V6 Gateway/Gatekeeper (Protocols H.323/SIP) – aka “Relay” will still work on IP400 and IP21.

It is not possible to run V6 Pbx on IP202 with 8MB Ram and 2 MB Flash.

With V6 you can run the IP202 with 8 MB Ram and 2 MB Flash only as Phone.

If you have an IP202 with 8MB Ram and 4 MB Flash (newer generation) you can run it with V6 as Phone,

Gateway/Gatekeeper and V6 Pbx (as it was in V5).

V6 Pbx needs minimum 4 MB Flash because of Firmware image, Vars and directory.

Minimum of 8Mb Ram because the V6 Pbx Code needs for itself minimum of 4 MB Ram

You can check the size of Flash/Ram at the Webinterface of your unit (General -> Info). There you'll see a line like this "Version V5.01 sr1-hotfix IP202[05-5874], Bootcode[336], HW[224] 4096/8192" The two numbers after HW[224] describe the size of the Flash/Ram. In this example the unit got a 4 MB Flash and a 8 MB Ram.

Retrieved from "https://wiki.innovaphone.com/index.php?title=Howto:V6_and_V7_on_IP21,_IP200_(old),_IP202_and_IP400&oldid=5362"