Howto:VoIP-Telecom - SIP Provider Compatibility Test: Difference between revisions
No edit summary |
No edit summary |
||
| Line 46: | Line 46: | ||
For more information on the test procedure, please read the following wiki article: [[Howto:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria. | For more information on the test procedure, please read the following wiki article: [[Howto:SIP_Interop_Test_Description|SIP Interop Test Description]]. Bold lines in the test results indicate a KO-criteria. | ||
[[Image:Voip- | [[Image:Voip-telecom_SIP_Compatibility_Test_2.png]] | ||
Revision as of 11:29, 21 July 2011
 |
| this is 3rd party content not provided by innovaphone, see history for authors. |
ITM/innovaphone Compatibility Test Report
Summary
SIP Provider: VoIP-Telecom
The provider supports all required innovaphone features and is therefore qualified as recommended SIP Provider.
...
That beeing said, the provider has achieved x% of all possible test points. For more information on the test rating, please refer to Test Description
- Features:
- Direct Dial In
- Fax over IP (T.38)
- DTMF
- Supported Codecs by the provider
- G711
- G729
- G723
- G726
- T.38 UDP
Current test state
This product is being tested right now. The test is not yet completed.
Testing Enviroment
Scenario NAT
This scenario describes a setup where the PBX and phones are in a private network. The IP800 must use a stun server, in order to send correct SIP - messages. The IP800 works as media relay, all RTP - streams go through the PBX.
Test Results
For more information on the test procedure, please read the following wiki article: SIP Interop Test Description. Bold lines in the test results indicate a KO-criteria.
Configuration
Firmware version
All innovaphone devices use V9hf1 build 90600.01 as firmware.