IP38 Technical Data EN: Difference between revisions

From innovaphone wiki
Jump to navigation Jump to search
No edit summary
Line 22: Line 22:
Power supply:
Power supply:


Power over Ethernet (802.3af, Class 3)
Power over Ethernet (802.3af, Class 1)
or
or
external power supply
external power supply

Revision as of 16:54, 1 July 2015

innovaphone® AG | Umberto-Nobile-Str. 15 | 71063 Sindelfingen | Germany | T +49 7031 73009-0 | F +49 7031 73009-9 | info@innovaphone.com | www.innovaphone.com
Errors, delivery times and technical specifications may be subject to change. Copyright © 2023 innovaphone® AG

Illustration

IP29 frontal ret small.png

Datasheet

innovaphone IP38

VoIP-Gateway for eight analog trunk lines and platform for innovaphone PBX

Housing

Size: 210 x 144 x 32 mm 1 HE for 19” systems

Weight: 660 g

Interfaces

1 x Ethernet: RJ 45 interface 10/100-BASE-TX (auto negotiation), Power over Ethernet (802.3af, Class 1)

8 x a/b interface, FXO, international RJ-11, two PINs in the middle used

Hardware

Power supply:

Power over Ethernet (802.3af, Class 1) or external power supply

Power Consumption: see wiki-article „HowTo:Power Consumption“

Digital Signal Processor (DSP) for codecs up to eight voice channels

32 MB SDRAM, 16 MB Flash

Operation temperature: 0 °C to +45 °C

Humidity: 10% to 90% (not condensed)

Storage temperature: -10 °C to +70 °C

innovaphone PBX

Platform for up to 50 registrations resp. 15 myPBX clients

VoIP protocols

H.323 Version 5

H.323 over UDP, TCP, TLS

SIP Version 2 conform RFC 3261

SIP over UDP, TCP, TLS

RTP, SRTP, RTCP

T.38 (Fax)

CLIP

Voice Codecs

G.711 A-law / µ-law, G723.1 (5.3), G.729A

VAD (Voice Activity Detection), CNG (Comfort Noise Generation)

Dynamic Jitter Buffering

Echo Compensation: G.168

Data modem support

Network

PPPoE, manual or automatic connection after boot

PPTP Tunneling up to 32 tunnels simultaneously, encoding via MPPE

NAT, H.323-NAT

RSTP, IEEE 802.1x

VLAN-ID acc. to IEEE 802.1q

DHCP and LLDP/MED support

NTP support

Administration

Password protected administration via web-browser, Kerberos server

Log and trace files, Display of interface and connection status, Ping – connection test for Internet Protocol, Sending SNMP Traps

Save and reload config files, Boot code and firmware update via HTML upload, Automatic update via update server

Supplementary services

  • Calling Line Identification
  • DTMF tone generation
  • Separate volume settings for external devices
  • Detection of dialtones
  • Detection of busy tones
  • Detection of ringing tones and ringing currents

Order number

01-00038-001

Datenblatt

innovaphone IP38

VoIP-Gateway für acht analoge Amtsanschlüsse und Plattform für die innovaphone PBX

Gehäuse

Abmessungen: 210 x 144 x 32 mm eine Höheneinheit für 19“ Systeme

Gewicht: 660 g

Schnittstellen

1 x Ethernet: RJ 45 Schnittstelle 10/100-BASE-TX (auto negotiation) mit „Power over Ethernet“ nach 802.3af, Class 1

8 x a/b Schnittstellen (FXO): für einen Anschluss von jeweils einem RJ-11 Stecker pro analogem Kanal, Belegung auf den mittleren PINs

Hardware

Stromversorgung:

Power over Ethernet nach 802.3af, Class 3 oder Steckernetzteil

Leistungsaufnahme: siehe Wiki-Artikel „HowTo:Power Consumption“

Digital Signal Processor (DSP) für Sprachverarbeitung bis zu 8 Kanäle

32 MB SDRAM, 16 MB Flash

Betriebstemperatur: 0 °C bis +45 °C

Luftfeuchtigkeit: 10% bis 90% (nicht kondensierend)

Lagertemperatur: -10 °C bis +70 °C

innovaphone PBX

Plattform für bis zu 50 Registrierungen resp. 15 myPBX Nutzer

VoIP-Protokolle

H.323 Version 5

H.323 über UDP, TCP, TLS

SIP Version 2 konform RFC 3261

SIP über UDP, TCP, TLS

RTP, SRTP, RTCP

T.38 (Fax)

CLIP

Sprach-Codecs

G.711 A-law / µ-law, G.723.1 (5.3), G.729A

VAD (Voice Activity Detection), CNG (Comfort Noise Generation)

Dynamic Jitter Buffering

Echo Kompensation: G.168

Modemunterstützung

Netzwerk

PPPoE-Protokoll, manueller / automatischer Verbindungsaufbau nach Start

PPTP bis zu 32 Tunnel parallel, Verschlüsselung mit MPPE

NAT, H.323-NAT

RSTP, IEEE 802.1x

VLAN-ID nach IEEE 802.1q

DHCP und LLDP/MED Unterstützung

NTP Unterstützung

Administration

Passwortgeschützter Zugriff über Web-Browser, Kerberos-Server

Log- und Trace-Dateien, Statusanzeigen

Ping – Verbindungstest, Senden von SNMP-Traps

Speichern und Einlesen der Konfiguration, Aktualisierung Boot-Code und Firmware über HTML-Upload, Automatische Aktualisierung über Update-Server

Leistungsmerkmale

  • Rufnummernidentifizierung
  • DTMF Ton Generierung
  • separate Lautstärkeeinstellung für extern angeschlossene Geräte
  • Erkennung von Wahlbereitschaftstönen
  • Erkennung von Besetzttönen
  • Erkennung von Klingeltönen und Klingelspannungen

Bestellnummer

01-00038-001

CE-Declarations

Conformities

{{{1}}}

{{{2}}}

WEEE-Number

innovaphone WEEE-Number

DE 31703754