Reference10:PBX/Objects/Number Map: Difference between revisions
(New page: This object maps the dialed number to a new one optionally depending on the registration address of the calling endpoint. Matching of the registration address only works if the calling end...) |
No edit summary |
||
| Line 11: | Line 11: | ||
|} | |} | ||
A MAP object can be member of the VIP group defined for an [[Reference:Administration/PBX/Objects/Executive | executive object ]]. If the ''Dest. No'' is an executive object then, this object will accept calls through this ''Number MAP'' object as direct call to the executive. | |||
The parameter 'Hide connected endpoint' can be used to not display the destination of the call on the calling phone. | |||
Revision as of 12:13, 28 May 2013
This object maps the dialed number to a new one optionally depending on the registration address of the calling endpoint. Matching of the registration address only works if the calling endpoint is registered on the PBX on which this object is defined (the PBX property of the Number Map object).
It may be used for abbreviated number dialing, or if used with registration address match to dial certain destinations depending on the physical location of the phone (e.g. to make shure the local emergency number is called).
| Address/Mask | Define the IP network for which this destination address shall be used. If left blank no check on the registration address is performed. |
| Dest. No | The number to be dialed |
A MAP object can be member of the VIP group defined for an executive object . If the Dest. No is an executive object then, this object will accept calls through this Number MAP object as direct call to the executive.
The parameter 'Hide connected endpoint' can be used to not display the destination of the call on the calling phone.