Reference10:PBX/Objects/Session Border

From innovaphone wiki
Revision as of 18:20, 20 September 2012 by Gd (talk | contribs)
Jump to navigation Jump to search
There are also other versions of this article available: Reference9 | Reference10 (this version) | Reference11r1

A Session Border object provides the session border functionality for a single device, which is that the device can register to this object and the object establishes the registration to a configured PBX. This can be used when the for example the device is located within the public internet and the PBX in a private network.

It must be considered that this is not NAT functionality, so media addresse are not manipulated. This means that in this scenario any media streams must use public addresses.

Registration to internal PBX

Parameters for the registration to the PBX (H.323 only)

Gatekeeper Id
Gatekeeper Id/Domain of the PBX
Primary Addr
The primary address the registration is attempted to
Alternate Addr
The alternate address
Name
Name used for the registration
PBX Password
If the checkmark is set, the PBX admin password is used for the registration

Registration from external

Parameters for the registration of the device (SIP or H.323)

Name
Registration Name
PBX Password
If the checkmark is set, the PBX admin password is used for the registration