Reference13r3:Concept Softphone Redundancy: Difference between revisions
Jump to navigation
Jump to search
(New page: Softphone Redundancy Category:Concept_myApps {{FIXME|reason=This product is in the beta phase and is not yet finished}} == Applies to == * innovaphone devices wit...) |
No edit summary |
||
Line 1: | Line 1: | ||
[[Category:Concept|Softphone Redundancy]] | [[Category:Concept|Softphone Redundancy]] | ||
[[Category:Concept_myApps]] | [[Category:Concept_myApps]] | ||
[[Category:Concept_App_SoftphoneApp]] | |||
{{FIXME|reason=This product is in the beta phase and is not yet finished}} | {{FIXME|reason=This product is in the beta phase and is not yet finished}} | ||
Revision as of 19:17, 29 November 2022
Applies to
- innovaphone devices with a PBX from version 13r3
- innovaphone myApps (all platforms)
Configuration
The Softphone App takes the configuration that is published by the myApps client inside the connInfo object in the API model of com.innovaphone.client.
- pri
- The primary PBX.
- sec
- The secondary PBX.
- phys
- Explicit physical location, if configured.
See Reference13r3:Concept_myApps_Redundancy#Published_information_for_the_softphone_app for details.
Registration
In the myApps launcher
- The softphone tries to register to the primary and the secondary PBX in an alternating manner.
- During the registration flow, it might be redirected several times until it is registered to the PBX the user is configured on.
- In standby cases one of the PBXes might keep the registration acting as a standby, instead of redirecting.
In the browser
The Softphone App always registers to the current PBX. As the Softphone App is loaded from the same PBX as the myApps client, the redundancy is solved by the myApps client.
Physical location
In the myApps launcher
- If an explicit physical location is configured in the myApps client, the softphone uses it for registration.
- Otherwise it uses the location of the primary PBX.
In the browser
- If an explicit physical location is configured in the URL-Parameters of the myApps client (#phys=), it is used for the registration.
- Otherwise it uses the location of the current PBX.