Reference13r3:IP6/ETH/IP6: Difference between revisions
Jump to navigation
Jump to search
m (New page: == Configuration == {| |valign=top nowrap=true|'''Address Configuration:''' | Automatic or static IP6 address configuration |} == Addresses == {| |valign=top nowrap=true|'''IP6 Address:''...) |
(No difference)
|
Latest revision as of 17:03, 21 February 2023
Configuration
| Address Configuration: | Automatic or static IP6 address configuration |
Addresses
| IP6 Address: | The IP6 address used by the network adapter. |
| Prefix: | tbd |
Gateway
| Default Gateway: | The standard router used by the device. |
Options
| Router Interface: | tbd |
| Proxy ND: | Enable replies to Neighbour Discovery requests if for queried IP6 address an active route exists |
| Disabled: | Disable the interface |
Static IP6 Routes
In the Static IP6 Routes section, additional network routes can be defined, if other network areas apart from the local network are required.
| Destination: | The network address of the destination route. |
| Gateway: | The standard gateway of the network being routed. |
IP6-Filter
Definition of global IP6 address filters to protect the device from unauthorised access.
| Enable: | Consider defined filters |
| IP6-Filter-Address: | The network address to be filtered. |
| IP6-Filter-Port: | The port to be filtered out of the defined network address. |
| Protocol: | Protocol to which the filter is applied. UDP or TCP. |