Reference8:Release Notes Firmware: Difference between revisions

From innovaphone wiki
Jump to navigation Jump to search
m (regular roadmap update)
No edit summary
Line 7: Line 7:
Please see ''[[Support:What is the DVL-Roadmap?|the disclaimer]]'' before using the information presented here!
Please see ''[[Support:What is the DVL-Roadmap?|the disclaimer]]'' before using the information presented here!


 
__NOEDITSECTION__
   
{{#invoke-url: http://wiki.innovaphone.com/extensions/InvokeUrlFunction/generateProjectList.php?area=maintenance&category=Firmware%20V8}}
= V8 Release =
This release adds all kind of classic PBX/TAPI Features<!---->
[http://mantis.innovaphone.com/view.php?id=15115 Definition]
 
 
   
= V8 Hotfix  6 (80500.20) =
Changes included in Version 8 hotfix6<!---->
[http://mantis.innovaphone.com/view.php?id=54972 Definition]
 
 
   
== SIP: Media-negotiation after call transfer failed (no audio) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=54442 54442]
|}
Re-negotiation after call transfer failed.<br/>Results into no-audio condition.
''Status:''
sip.cpp/h
   
== send busy tone from PBX dtmf object for not working cf with diversion filter ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=54978 54978]
|}
If a diversion filter is set on a user and the dialed diversion to the pbx dtmf object is not allowed, a busy tone and a reject cause is now sent by the dtmf object.
   
== IP-DECT Master call list OEM link and call state ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=55026 55026]
|}
For OEM devices the call clear link doesn't work.<br/>Call state for the outgoing party is shown as "off-hook".
''Status:''
dectmaster_call.xsl, dectmaster.cpp
   
== No Media event was generated even everything was normal for unanswered CC exec on IP-DECT ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=55177 55177]
|}
Could happen for other traffic cases as well like rejected CC exec
''Status:''
dectradio.cpp, media.cpp
   
== Point to Multipoint ISDN Maps need to set Type ISDN for CGPN-Out Map ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=55184 55184]
|}
If not the mapping does not work for some networks and always the default number is used for outgoing calls as calling party number
''Status:''
gk.cpp
   
== SIP: Digest authentication is rejected if username contains non-us-ascii characters ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=55217 55217]
|}
Digest authentication is rejected if username contains non-us-ascii characters.<br/>Expected special characters to be URL encoded, but most clients send it UTF8 encoded.
   
== H.323: Cause received with PROGRESS message got lost ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=55248 55248]
|}
This could result in calls to busy subscribers in a QSIG PBX to terminate with "recovery on time expiry" instead of "user busy"
''Status:''
h323sig.cpp
   
== SIP: Outgoing call (early, not connected) was not canceled (sometimes) on ISDN interworking scenario ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=55277 55277]
|}
An incoming DISCONNECT with progress indicator did not caused the outgoing SIP call to be canceled.
''Status:''
sip.cpp
   
== Gateway: divertingLeg2 was not passed in some cases ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=55310 55310]
|}
divertingLeg2 got lost during re-routing in Gateway.<br/>E.g. routing each call over TONE caused the divertingLeg2 to disappear.
   
== Webdav: Handling of failed TCP when writing to file ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=55460 55460]
|}
Webdav client needs handling of TCP error when writing to file
   
== TEL interface: '#11' not callable if feature codes enabled ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=55537 55537]
|}
If feature codes are enabled for a TEL interface, the number '#11' without anything else can not be dialled.<br/>To fix please submit gateway's general page with the OK button or do a factory reset.
''Status:''
config.h, relay_general.xsl
   
== ARP requests/replies returned to the sender should be ignored ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=55560 55560]
|}
It was observed that in WLAN environments broadcasted ARP requests/replies may be received by the sender again. This results in some problems when DHCP checks if an IP address is not used by another device via ARP. Now returned requests/replies are simply ignored.
   
== T.38 doesnt work if the call is transferred from a IP-Phone to a fax device ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=55569 55569]
|}
Affects IP2x IP30x fax gateways, the ipphone needs no update
''Status:''
ac_dsp3.cpp<br/>v7:<br/>ac494004.h <br/>ac498004.h
   
== DECT: Trap while initiating blind transfer when using SIP as PBX protocol ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=55581 55581]
|}
0:0246:363:3 - GK-CALL free error 9481a58c<br/>0:0246:363:4 - last free=DECTMASTER-RADIO len=6<br/>0:0246:363:4 - caller=0x943796d0<br/>0:0246:363:4 - HEXDUMP<br/>      00000000 - 05 80 38 30  31 31                                  ..8011          <br/>0:0246:363:4 - BUFFER-FREE: obj at 0x9481a574 inconsistent<br/>0:0246:363:4 - HEXDUMP<br/><br/>Fixed in dectmaster.cpp
   
== Kerberos problem with encrypted password data containing null bytes ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=55692 55692]
|}
Encrypted Kerberos passwords that are stored using LDAP may contain null bytes. Therefore they must not be handled as strings but as binary data when reading them.
''Status:''
files: kerberos_ldap.cpp
   
== Phone: Make PBX-initiated calls don't look like transferred calls ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=55784 55784]
|}
Do not send CT_SETUP.
   
== "Join Group" function key lost state after a PBX reboot when the phone config was stored on the PBX ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=55790 55790]
|}
The Join Group function key lost it's state and did not work anymore after a PBX reset because the the phone config sent by the PBX after reregistration was not evaluated at the phone again.
   
== flash variables may get lost after reboot (because  of an earlier  trap in the critical phase of flash garbage collection) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=55797 55797]
|}
Two valid segments bearing the same data are left back when a fragmented segment is compacted into a new one and the box traps after the new segment has been validated but before the old segment has been marked invalid.<br/>Because of a wrong comparison this situation was not resolved after reboot. Instead of deleting one of the segments the new segment was used until completely filled. Therafter all further allocations failed. This situation could only be cleared by a reset to factory defaults.<br/>Now, if the flash user is permitted to use only one segment (for example VARS on most boxes) the old segment is invalidated and the new compacted segment remains. If the flash user is permitted to use more segments (for example LDAP) the new segment is invalidated because it's not known which of the old segments was compacted.<br/> <br/>
   
== PBX potential trap when parsing SOAP XML ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=55812 55812]
|}
No child element found in SOAP XML<br/>
   
== Possible buffer overrun when reading/writing fat volumn id ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=55858 55858]
|}
There was a possible buffer overrun when reading/writing the fat volumn id.
   
== SIP: Display name contained bad characters in some cases ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=55891 55891]
|}
Uninitialized buffer content presented as name identification.
   
== some Compactflash cards not working with innovaphone cardslots ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=55903 55903]
|}
There are compactflash cards that don't respond 848Ah as General Configuration word to Identify Device Command.
   
== Modified interface for OEM password complexity ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=55087 55087]
|}
OEMs can now implement a module for checking password complexity
''Status:''
files: <br/>./common/lib/lib.mak <br/>./common/interface/interface.mak <br/>./common/interface/pwd_complex_api.h <br/>./common/interface/pwd_complex_api.cpp <br/>./ascom/pwd_complex/pwd_complex.h <br/>./ascom/pwd_complex/pwd_complex.cpp <br/>./box/command/command.h <br/>./box/command/command.cpp <br/>./dect/users/dectusers.cpp <br/><br/>
   
== OEM password complexity for Kerberos users ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=55091 55091]
|}
The Kerberos module can now check the complexity of user passwords if this is implemented by the OEM software.
''Status:''
files:<br/>kerberos_db.cpp
   
== Simplified administration UI for some OEMS ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=55137 55137]
|}
Some items in the adminstration user interface can now be hidden by setting special xml-modes (admin-basic,admin-advanced).
''Status:''
files:<br/>- ./dect/users/dectusers.cpp<br/>- ./dect/master/dectmaster.cpp<br/>- ./platform/platform.mak<br/>- ./platform/asc_diagnostics_basic.xml<br/>- ./platform/asc_diagnostics_hdr_basic.xml<br/>- ./platform/dect_hdr.xml<br/>- ./platform/eth0_hdr.xml<br/>- ./platform/left_menu.xml<br/>- ./box/httpfiles/reset_hdr.xml<br/>- ./common/platform/ip1201.cpp<br/>- ./box/command/command.h<br/>- ./box/command/command.cpp
   
== Hide some pages and items on admin UI while OEM provisioning is running ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=55162 55162]
|}
While the provisioning module of an OEM is active, special xml-modes are set that can be used to hide items from the administration interface.
''Status:''
files:<br/>./ascom/httpfiles/asc_ntp.xsl<br/>./ascom/httpfiles/asc_dectfty.xsl<br/>./common/platform/ip1201.h<br/>./common/platform/ip1201.cpp<br/>./common/service/ntp/ntp.cpp<br/>./dect/fty/dectfty.cpp
   
== IP-DECT OEM location monitor function change ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=55294 55294]
|}
For OEM modules the location monitor is changed.
''Status:''
dectmaster.cpp
   
== DTMF feature call completion can be also used for no response ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=55309 55309]
|}
The feature is not only usable after a busy call, but also after a call with no response.
   
== Update client option for short URL ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=55324 55324]
|}
For OEM http server the update client should not append additional options to the update server URL.
''Status:''
update.h, update.cpp
   
== SIP: Detect remote party identity change ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=55329 55329]
|}
Remote party update did not work in all cases:<br/>If initial INVITE got no identity header, but re-INVITE contains identity header.
''Status:''
sip.cpp/h
   
== IP-DECT OEM configuration options for registration speed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=55499 55499]
|}
For an OEM PBX it is necessary to configure the user's registration speed to this PBX. Used only in the OEM DECT device.
''Status:''
dectmaster.h, dectmaster,cpp.
   
== SIP: Added Microsoft propriatary extension "ms-acceptedby" for OCS compatibility ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=55510 55510]
|}
A forked call that is accepty elsewhere is counted as "missed call" by OCS unless Microsoft specific extension is add to Reason header.<br/>  Reason: SIP;cause=200;text="OK";ms-acceptedby="sip:user@domain.com"<br/>According to [MS-SIPRE].pdf
   
== A DHCP client with  "/keep on" should not fall back to dicsover mode if the lease is due ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=55561 55561]
|}
"/keep on" forces reusing the remembered lease if no DHCP server is responding after boot. But if the server failed to respond to the final rebind request for a regularly obtained lease a new recovery was started.<br/>Now in this case the lease is used further, a request for the lease and an ARP requests to check if the IP address is not assigned to another device are sent in regular intervals.
   
== SIP: Hide product information in reject responses ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=55620 55620]
|}
Don't be kind to SIP scan tools.
''Status:''
siptrans.cpp
   
== Include modes into configuration page of update client ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=55669 55669]
|}
Needed for OEM specific XSL.
   
== Phone: Problems with 'Presence' Fkey ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=55785 55785]
|}
Presence Fkey requires working presence subscription.<br/>Presence subscription may fail from time to time due to several reasons.<br/>Reliable re-establishment is required.
''Status:''
phonesig.cpp
   
= V8 Hotfix 7 (80500.27) =
Changes included in Version 8 hotfix7 <!---->
[http://mantis.innovaphone.com/view.php?id=56817 Definition]
 
 
   
== Gateway: Trap if Name Out or other fields with very long content ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=55941 55941]
|}
A buffer overrun could happen if very long strings were used as input values
''Status:''
gk.cpp
   
== PBX: Unknown filter did not work anymore in version 8 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=55944 55944]
|}
The unknown filter could be configured, but was not applied to calls made by endpoints registered as unknown.
''Status:''
pbx.cpp
   
== Firmware update failure on ip4001 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=55981 55981]
|}
On the IP4001 the hwbuild string is computed using the boot flags to see if the box is in production mode. This causes a flash access conflict if the info screen is shown during a flash write ( firmware upload ).
''Status:''
cpu.cpp cpu.h
   
== Gateway: Overlap Dialing routes did not work as expected ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=56006 56006]
|}
- sometimes '#' was added to the outgoing call even if 'Add #' was not configured<br/>- enbloc calls were terminated by a route with '.' as incomplete if not enough digits, even if matching routes followed
''Status:''
relay.cpp, gk.cpp
   
== IP2x IP30x: Missing tones on BRI interface with SIP implementations that send RTP prior to coder negotiation ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=56010 56010]
|}
This is the problematic scenario:<br/>The IP302 BRI interface is registered on a SIP proxy.<br/>An outgoing call is placed, the SIP proxy sends a STATUS 180 Ringing without SDP information. <br/>The remote side sends RTP data (with inband information) to the IP302.<br/>This switches off the IP302 generated tone, but the remote tone is cannot be used since the SDP is missing in the STATUS 180 message.<br/><br/>Now we ignore RTP with unknown coder for switching off the tone.
''Status:''
ac_dsp3.cpp
   
== SIP: Switch to fax did not work in some cases ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=56076 56076]
|}
Sometimes switch to audio occured immediately after switch to t.38
''Status:''
sip.cpp
   
== Call Completion on Busy to diverted destination failed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=56243 56243]
|}
with the call rejection no informtion about the final destination (leg1 info) was sent, so the call completion was tried with the original called destination.
''Status:''
pbx.cpp
   
== PBX: Multiple mobility destinations with delay not handled optimal ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=56302 56302]
|}
- if no local phone was registered, all mobility destinations were called right away. Now the destination with the shortes delay is called right away and the others later according difference in delay<br/><br/>- if local phone was busy the mobility destinations was only called after delay. The one with the shortes delay should be called first and then the others.
''Status:''
pbx_mobility.cpp, pbx_mobility.h, pbx.cpp, pbx_api.h
   
== PBX: Groups could not be configured for objects with empty PBX setting ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=56307 56307]
|}
Empty PBX setting means the object is handled as it has the local PBX set. So the local groups should be selectable
''Status:''
pbx_admin.cpp, pbx.cpp
   
== Always allow local authentication in boot mode ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=56396 56396]
|}
As Kerberos does not work in boot mode, the disable local authentication flag must be ignored there.
''Status:''
Files: command.cpp
   
== SIP: Switch to t.38 was answered with audio instead of 488 reject ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=56404 56404]
|}
In case t.38 is not enable, a switch to t.38 was not rejected with 488.<br/>SDP answer with currently active audio coder was send instead.
   
== PBX: Errors when creating or changing Mobility objects were not displayed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=56411 56411]
|}
If an error was detected (e.g. duplicate number) saving of the object was prohibited, but no error message as for other objects was displayed
''Status:''
pbx_edit_mobility.xsl
   
== PBX-SOAP: Admin function could not be used to configure some new parameters ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=56419 56419]
|}
like phone-config, description, ...
''Status:''
pbx.cpp, pbx.h
   
== IP-DECT R-key handling for OEM protocol ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=56469 56469]
|}
The R-key for an OEM protocol does not work.
   
== Support for packetization up to 80ms ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=56566 56566]
|}
60ms was the limit before
''Status:''
h323ch.cpp
   
== IP-DECT FTY with TSIP and SIPS ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=56580 56580]
|}
The feature codes do not work with TSIP, the local cf does not work with TSIP and SIPS.
   
== IP-DECT: No Audio was received during call waiting ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=56616 56616]
|}
This was another collateral damage from<br/><br/>fix: #55177: No Media event was generated even everything was normal for unanswered CC exec on IP-DECT
   
== Changing the do-not-disturb user setting has no effect if do-not-disturb function key configured and present ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=56743 56743]
|}
problem: Changing the do-not-disturb user setting has no effect if do-not-disturb function key configured and present<br/><br/>solution: fixed in code<br/><br/>files: phone/user/phone_user.cpp<br/><br/>products: all IPxxx telephones<br/><br/>risks: none<br/><br/>
   
== SIP: Distinctive ring tones ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=55948 55948]
|}
Handling of "Alert-Info: internal".<br/>Triggers special ring tone.
''Status:''
sip.cpp
   
== SIP: Send P-Asserted-Identity header in 180/Ringing ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=56091 56091]
|}
Some UAC do not show called party's display name when added to To header by UAS.<br/>We now provide PAI header in provisional responses also containing the called party's display name.
''Status:''
siptrans.cpp/h<br/>sip.cpp
   
== Gatway: Call completion interworking on called side did not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=56214 56214]
|}
Call completion on called side did not work<br/><br/>Thanks to Georg Hartwig for giving us his precious support during developent!
''Status:''
relay.cpp/h<br/>q950.cpp/h<br/>q931.cpp/h<br/>q931_nt.cpp<br/>q931_te.cpp<br/>nt_tbl.tbl<br/>te_tbl.tbl<br/>fty.cpp/h
   
== SIP Interworking: CGPN in display name of From URI ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=56504 56504]
|}
SIP Interworking: Get CGPN from display name of From URI
   
== A DHCP client with  "/keep on" should send DISCOVER requesting the last assigned address after boot (not a REQUEST) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=56543 56543]
|}
In WLAN networks with more than one DHCP Server REQUESTing the last assigned address after boot needs more time to switch to a new server if the server providing this address has gone.
   
== Configuration Option to keep Routes over a PPP interface always active ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=56711 56711]
|}
To guarantee that certain connections are only established over a virtual private network, routes over a PPP interface need to be kept active in routing table even while the PPP interface is down. This is done now by checking<br/>  "Configuration/IP/PPP-Config/PPP<n>/Always keep Routes active"<br/>For enabled PPP interfaces which are not up the current routing state (active/skipped) is displayed in addition to the interface state under<br/>  "Configuration/IP/Routing" <br/><br/>
   
= V8 Hotfix 8 (80500.28) =
Changes included in Version 8 hotfix8 <!---->
[http://mantis.innovaphone.com/view.php?id=56818 Definition]
 
 
   
== PBX: Checking if a call matches an pending call-completion request was wrong ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=56706 56706]
|}
If a call completion is pending and the user calls the destination with the pending CC or the user retries successfully the call independent of the pending CC, we want to avoid to signal this CC. For this we match any calls to pending CCs. Sometimes this resulted in matches even if there was none and pending CCs were cleared which shouldn't
''Status:''
pbx.cpp
   
== PBX: Trap if duplicate "Long Name" in Database ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=56774 56774]
|}
It may happen that on a replicated PBX temporarily multiple objects with the same Long Name (cn) exist. In the case the PBX restarted.
''Status:''
pbx.cpp
   
== PBX: CFNR configured at Waiting not executed correctly on transfer to Waiting ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=56775 56775]
|}
under some circumstances not executed at all and sometime without waiting for No Response Timeout
''Status:''
pbx.cpp
   
== IP24, IP28: Trap if doing a tranfer for a pickup call ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=56780 56780]
|}
If a pickup was done (*0#) from an analog phone connected to a IP24, IP28 and this call was transfered afterward (R), a trap happened as soon as the transfer was executed either by R-4 or by hanging up
''Status:''
relay.cpp
   
== PBX: Trap if calling a Boolean object from a mobile endpoint ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=56825 56825]
|}
This could be used to set boolean state from a mobile phone
''Status:''
pbx_mobility.cpp, pbx_bool.cpp
   
== Gatway: Suspend/Resume on call completion interworking ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=56827 56827]
|}
Suspend/Resume signaling on call completion interworking did not interwork
   
== PBX Mobility: Trap if call to mobile phone scheduled for recall is cleared and SOAP monitoring is on ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=56847 56847]
|}
If call is put on hold by the mobile phone and then the mobile phone hangs up, the PBX tries to recall the mobile phone. If the held party hangs up in this situation with SOAP monitoring of the mobile phone active, a trap happens
''Status:''
pbx_mobility.cpp
   
== Trap on call completion with mobility over dtmf object ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=56882 56882]
|}
When using call completion with mobility over the dtmf object, the PBX crashed.<br/>Now call completion over mobility is rejected.<br/>
   
== Disconnect from DTMF/ICP/Directory search object didn't work with mobility ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=56883 56883]
|}
The disconnect from the DTMF, ICP and Directory search objects didn't work with mobility, as it was wrongly called.
   
== PBX Mobility: CLIR did not work correctly ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=56899 56899]
|}
A call was sent without number, but it should have been sent with Number Presentation restricted option set.
''Status:''
ep_lib.cpp
   
== SIP: Keep ringing calls longer than 3 min ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=56901 56901]
|}
An INVITE client transaction was canceled 180 secs after "180 Ringing" have been received.<br/>
   
== H.323 registration using a PPTP connection failed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=56910 56910]
|}
on PPTP server side wrong IP address was chosen as local address if interface was vonfigured without local address and authentication was used on H.323
''Status:''
h323.h, h323ras.cpp
   
== IP-DECT: Load sharing for trunks (OEM protocol) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=56942 56942]
|}
Load sharing for trunks does not work. It is used for an OEM protocol.
   
== Trap: When handling call completion request from ISDN ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=57113 57113]
|}
Trap: When handling call completion request from ISDN
''Status:''
relay.cpp<br/>q931.cpp<br/>pppif.cpp<br/>signal.cpp/h
   
== Qsig Leg2 Info decoding could fail ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=57126 57126]
|}
Qsig Leg2 Info decoding could fail
   
== Protect TLS socket against collision of SOCKET_RECV and SOCKET_SHUTDOWN ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=57130 57130]
|}
It was possible that a collision of SOCKET_RECV from the application and SOCKET_SHUTDOWN from the TLS socket occured. This could lead to a trap because the application was already deleted when the SOCKET_RECV_RESULT was sent.
''Status:''
tls.cpp
   
== Missing "Recall possible" text in status line ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=57196 57196]
|}
problem: Missing "Recall possible" text in status line <br/><br/>solution: fixed in call<br/><br/>files: phone/app/app_cc.cpp [box/phone]/forms/[lcd/]forms_gen.cpp<br/><br/>products: all telephones<br/><br/>risks: none<br/><br/> <br/>
   
== PBX: Call from mobile endpoint could not be picked up with DTMF group pickup ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=57204 57204]
|}
pickup was rejeceted
''Status:''
pbx.cpp
   
== PBX: Diverting number sent in group indications was not adjusted ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=57213 57213]
|}
The number was sent with all node prefixes
   
== v9 Replication Compliance ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=57274 57274]
|}
Fixes addressing UTF-8 conversions
   
== SIP: Some interop tweaks did not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=57354 57354]
|}
Some module options did not work after reboot:<br/> /no-hr-notify<br/> /prefer-pai<br/>
   
== SIP: Fix for video calls through broadcast user ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=57504 57504]
|}
When initiating a video call towards broadcast user, an offer/offer collision may occur in the PBX.<br/>The PBX must select the video coder (not only audio coder) in this case.
   
== IP-DECT: Pickup, caller id update ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=57509 57509]
|}
Fix for the caller id display update after call pickup.
   
== SIP: Decoding of special Contact-URIs ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=57523 57523]
|}
sip:2031;phone-context=cdp.udp@dpp.nortel:5070;maddr=47.166.92.207;transport=udp<br/>The port information was not extracted from phone-context parameter.<br/>Format used by Nortel only.
   
== SIP: SDP attribut annexb=no was missing ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=57533 57533]
|}
If G.729 Annex B was disabled it must be explicitely announced,<br/>because no mentioning annexb is interpreted as annexb=yes.<br/>
   
== Tones: Ringback cadence for Ireland not correct ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=57545 57545]
|}
Ringing tone - Ireland<br/>Freq: 400+450<br/>Cadence: 0.4 on 0.2 off 0.4 on 2.0 off<br/><br/>
   
== PBX: Trap when handling presence subscription for VM object ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=57578 57578]
|}
Trap when handling presence subscription for VM object
''Status:''
pbx.cpp
   
== Allow dtmf features park/unpark for calls from voicemail object ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=57582 57582]
|}
Currently, calls from the voicemail object to the dtmf object were cancelled, as all calls from non user objects have been cancelled.<br/>Now, the features park and unpark are allowed.
   
== PBX did not send REMOTE_HOLD/RETRIEVE_RESULT ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=57599 57599]
|}
This causes problems with some third party equipment, which expects these messages
''Status:''
pbx.cpp
   
== SNMP, ifSpeed wrong ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=57610 57610]
|}
SNMP, ifSpeed wrong
   
== IP-DECT: MSF CLMS messages ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=57612 57612]
|}
Now CLMS messages can be sent with the MSF module.
   
== VM: trailing '#' in CDPN let's diverted call to VM fail ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=57649 57649]
|}
VM: trailing '#' in CDPN let's diverted call to VM fail
   
== Filter did not work correctly with local objects and overlap sending ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=57652 57652]
|}
For checking the filter in case of overlap sending, the number including the Node prefix was used regardless if the node prefix was dialed or not.
   
== PBX: IP Filter to restrict Registration do not work for UNKNOWN ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=57653 57653]
|}
These Filter only work for registrations to configured objects
   
== automatic or manual recording cannot be stopped if the recorded call is not the currently active call ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=57685 57685]
|}
Automatic or manual recording could not be stopped if the recorded call was not the currently active call.<br/>If the Redial-key is used to toggle recording this is intended behaviour because otherwise the Redial-key could not be used to transfer the non-recorded active call.<br/>If a 'Recording' function key is used to toggle recording there is no need for this restriction.<br/><br/>Now a 'Recording' function key stops automatically or manual started recording any case.
   
== Gatway: Do not pass through SRTP key if "Enable SRTP" not activated ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=55767 55767]
|}
Pass through SRTP key only if "Enable SRTP" is activated
''Status:''
channel.h<br/>sip.cpp<br/>gk.cpp<br/>h323ch.cpp
   
== PBX: Only 8 IP Filters possible, no indication if maximum reached ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=56764 56764]
|}
Number increased to 32. If 32 Filters are configured no field to enter a new one is displayed
''Status:''
pbx.cpp, pbx.h, pbx_api.h, pbx_admin.cpp, pbx_global.xsl
   
== PBX: Filters to even restrict registration with password ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=56888 56888]
|}
The existing filters only restricted registration to the PBX without password. Now in addition to this registration with password can be restricted as well.
''Status:''
pbx.cpp, pbx.h, pbx_api.h, pbx_admin.cpp, pbx_global.xsl, pbx_admin_hdr.xml
   
== DTMF facilities: new MWI modes for an OEM protocol ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=56953 56953]
|}
New modes for message waiting indication added in the DTMF facility module. There are used for an OEM protocol in OEM IP-DECT devices.
   
== SIP: Allow to receive messages larger than 2560 bytes ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=57081 57081]
|}
There was a limitation for incoming SIP messages at 2560 bytes.
   
== IP-DECT: anonymous login; master id checks/traces ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=57104 57104]
|}
For anonymous handsets login additional master id checks and traces added.
   
== make function keys on the phone-ui unmodifiable and unviewable ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=57212 57212]
|}
problem: by setting a function key readonly mask (config change PHONE USER /funclock-ro-mask <mask> or web-ui: Phone->Protect->Function keys not modifiable on the phone-> <mask>), one can now determine a set of function key types which can only be set thru a web-ui and can only be viewed but not modified through phone-ui (see http://wiki.innovaphone.com/index.php?title=Howto:Disable_Function_Key_Modification_On_Phone_UI)<br/><br/>solution: fixed in code<br/><br/>files: phone/user/*<br/><br/>products: all telephones<br/><br/>risks: none<br/>
   
== SIP: Use registration's Contact-URI as Request-URI on calls to endpoints only ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=57300 57300]
|}
Registered gateways get a Request-URI containing the destination number
   
== Automated Kerberos configuration triggered by a special VAR ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=57330 57330]
|}
A box can now be advised to join a Kerberos realm by writing an XML-Command to variable CMD0/KCMD.
''Status:''
command.h<br/>command.cpp<br/>command.xsl<br/><br/>http://wiki.innovaphone.com/index.php?title=Howto:How_to_configure_Kerberos_using_commands#Automated_Client_Configuration_.28V8_Hotfix8_and_later.29
   
== IP-DECT: Kerberos configuration options for radio device configuration ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=57339 57339]
|}
Now it is also possible to configure the Kerberos client if the radio device in discovery mode is configured by the master. The new feature #57330 is used.
   
== IP-DECT: Messaging options and XML message type support ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=57413 57413]
|}
New configuration page "DECT - Messaging" for the IP-DECT messaging alert signal options. The enable option replaces the IP Master option "Enable messaging to PBX".<br/>The XML message type is supported now. With XML messages it is possible to change the alert signal message dependent.<br/>The message priority can be considered if enabled: the SIP priority "emergency" changes the alert signal to alarm and the priority "non-urgent" changes it to silence.
   
== Decoding of special XML entities ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=57451 57451]
|}
Implement decoding of the following entities: &amp;lt; &amp;gt; &amp;quot; &amp;apos; &amp;amp;
''Status:''
files: xml.cpp
   
== IP-DECT: log messages for MSF calls ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=57512 57512]
|}
Log messages for MSF calls added.
   
== IP-DECT: MSF module option disable ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=57560 57560]
|}
With the option /disable it is possible to disable the DECT MSF module.
   
== VM, URL parameter "$_noctl=true" allows to reject control-calls ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=57571 57571]
|}
Control calls may reach a VM object unintentionally. Such calls can now be rejected.
   
== Gateway: If Moh Mode is configured set 'exclusive coder' checkmark as well on UI ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=57654 57654]
|}
The MOH Mode implies that exclusive coders are used
''Status:''
relay_edit_phys.xsl
   
== Phone: Show presence note on 'partner' fkey label ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=57687 57687]
|}
Show presence note (if availbale) on 'partner' fkey label.<br/>If no text note is avalable, activity is shown (as usual).
   
== update service 'provision' option to request earlier and faster polling in provisioning mode ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=57799 57799]
|}
In provisioning mode the update service should start polling the update server as soon as possible and not use the default delay.<br/>This can be configured now by<br/><br/>    config add UP1 /provision <n><br/><br/><n> defines the delay in seconds of the first poll, subsequent polls start after (previous delay * 2) seconds. The maximum delay between polls is 60 seconds.<br/><br/>    config add UP1 /provision 0<br/>or<br/>    config rem UP1 /provision<br/><br/>switches back to the default or the configured polling interval<br/><br/>
   
= V8 Hotfix 9 (80500.32)  =
Changes included in Version 8 hotfix9<!---->
[http://mantis.innovaphone.com/view.php?id=57750 Definition]
 
 
   
== Disabling local authentication also turned off module authentication ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=57863 57863]
|}
When Kerberos was configured on a box and the local admin accounts were disabled, logging and PBX administration using PBX users did not work anymore.
''Status:''
files: command.cpp
   
== SIP: Transfer handling at Gateway may cause on-way-audio ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=57906 57906]
|}
I some scenarios where REFER is handled at the Gateway to transfer a local media call leg (e.g. ISDN) to any other call leg.
   
== IP-DECT: no digits en-bloc timeout ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=57925 57925]
|}
The timeout of the en-bloc timer is changed for the case that no digits are dialed. This fixes the Aastra PBX block bug.
   
== Resuming TLS sessions did not work correctly ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=58013 58013]
|}
The server now ensures that session IDs are unique by adding a timestamp and a serial number. This increases the size of session IDs from 16 bytes to 24 bytes.<br/><br/>Also IP addresses were not handled correctly by the session cache.
''Status:''
tls.cpp
   
== QSIG Call Complettion to MD110 failed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=58372 58372]
|}
QSIG Call Complettion to MD110 failed
   
== phone directory collating sort  order unexpected ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=58386 58386]
|}
The ordinal of the space character was higher than that of any alphameric character, thus for example "Smith Eric" was displayed behind "Smithson Eric".<br/>The ordinal of the space character is now 0. 
   
== SIP: Don't send empty P-Asserted-Identity in provisional response ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=58493 58493]
|}
SIP/2.0 183 Session Progress<br/>Via: SIP/2.0/TCP 10.64.32.2:14937;branch=z9hG4bK6728a259<br/>From: ""<sip:850@10exchange.wschneider.com;user=phone>;epid=123A3A4D16;tag=c755636afc<br/>To: <sip:00763773033@10.64.64.1;user=phone>;tag=3908677425<br/>Call-ID: d0248a8c-a324-454b-807a-923c30c1e24b<br/>CSeq: 34 INVITE<br/>Contact: <sip:00763773033@10.64.64.1:5060;user=phone;transport=TCP><br/>Allow: REGISTER,SUBSCRIBE,NOTIFY,INVITE,ACK,PRACK,OPTIONS,BYE,CANCEL,REFER,INFO,UPDATE,PUBLISH<br/>Content-Length: 230<br/>Content-Type: application/sdp<br/>Server: (innovaphone IP800/8.00 dvl [tac-1.11108:/8050028/400])<br/>Supported: replaces,privacy,answermode,from-change,100rel,timer,histinfo<br/>P-Asserted-Identity: <br/>P-Sig-Options: Sending-Complete<br/>
   
== Invalid duplicate DTMF object caused the PBX to trap ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=58514 58514]
|}
A false config with an invalid DTMF object (name like DTMF#pickup_group) caused the PBX to trap.<br/>Such an object will be ignored now.
   
== Pickup function key display discards leading letter on transferred call ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=58520 58520]
|}
problem: Pickup function key display discards leading letter on transferred call, so the first letter or number of the calling party is always missing <br/><br/>solution: fixed in code<br/><br/>files: phone/app_disp.cpp<br/><br/>products: all telephones<br/><br/>risks: none<br/><br/><br/>
   
== trap on late CHANNEL_INIT to relay_media_relay::serial_event() ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=58524 58524]
|}
A null pointer was referenced when a CHANNEL_INIT was passed to an object in closing state  <br/><br/>
   
== AD-replicator: xml-show-namingcontexts leaks memory ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=58564 58564]
|}
a memory leak occurred every time when clicked on Configuration/LDAP/Replicator(AD)/DN/"Show Options"<br/>
   
== Do not disconnect calls to directory search object from master/slave user ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=58587 58587]
|}
Calls from a master/slave user where disconnected by the directory search object.<br/>These calls are allowed now.
   
== Phone: Light up partner fkey even on active state ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=58589 58589]
|}
While the phone itself is in active state (non-idle) a partner fkey lamp did not light up when partner's presence indicate 'on-the-phone' activity.<br/>Only in idle state the lamp indicated that partner is 'on-the-phone'.
   
== SIP: Dialog-Info did not show "confirmed" state ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=58594 58594]
|}
"proceeding" was indicated instead.<br/>Caused Problems on snom phones.
   
== Soap::UserPickup() sometimes didn't work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=58665 58665]
|}
Soap::UserPickup() sometimes didn't work
   
== Call Intrusion across PBXs did not work (intrude call at slave from master) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=58710 58710]
|}
There was a fix already for this, but this covered only intrude at master from slave.
''Status:''
pbx.cpp<br/>pbx.h
   
== Gateway Routes with CDPN map to number containing '#' did not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=58737 58737]
|}
The number starting with the '#' was omitted.<br/><br/>Collateral damage of fix: #56006: Gateway: Overlap Dialing routes did not work as expected
''Status:''
gk.cpp
   
== PBX Trunk Object: Incomplete destination did not work for incoming incomplete enblock calls ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=58755 58755]
|}
collateral damage of fix: #54357: PBX Node 'incomplete Number' destination did not work for block dial calls
''Status:''
pbx.cpp
   
== DRAM /Firmware upload stops sometimes ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=58769 58769]
|}
Depending on the timing the upload hangs.<br/>Seen with the innovaphone test program and minifirmware
''Status:''
servlet_post_file.cpp
   
== Gateway: Trap on early RELEASE from calling side ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=58780 58780]
|}
If the caller stops calling at an early stage, a trap may occur:<br/><br/>0:0806:591:0 - LOG CALL 15 Alloc<br/>0:0806:591:3 - LOG CALL 15 A:Call    ->                        / PRI2::->*::<br/>0:0806:597:0 - LOG CALL 15 B:Call    100->226                  / PRI2:5336100:->RP2:226:<br/>0:0806:701:3 - LOG CALL 15 A:Rel    100->226                  / PRI2:5336100:->RP2:226: Cause: Recovery on timer expiry<br/>0:0806:712:3 - LOG CALL 15 Media    100->226                  G711A,20(0,0,0)/G711A,20(0,0,0) PRI2:5336100:->RP2:226: Cause: Recovery on timer expiry<br/>0:0806:713:7 - LOG CALL 15 B:Alert  100->226                  G711A,20(0,0,0)/G711A,20(0,0,0) PRI2:5336100:->RP2:226: Cause: Recovery on timer expiry<br/>0:0806:714:0 - TRAP: 0x10<br/>
   
== PBX: Name Identification was not forwarded with forked call ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=58786 58786]
|}
With call forking the original calling name id was not forwarded
''Status:''
pbx.cpp
   
== PBX: Trap if 'Escape dialtone from' is configured to a non-existent object ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=58789 58789]
|}
Check implemented to use internal TONE interface in this case
''Status:''
pbx.cpp
   
== SIP: re-INVITE without SDP offer was rejected with 504 Server Timeout in 'held' state ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=58822 58822]
|}
re-INVITE without SDP offer was rejected with 504 Server Timeout if received on an inactive session.<br/>
   
== SIP: Handling of reject of re-INVITE without SDP offer was incomplete ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=58824 58824]
|}
Handling of reject of re-INVITE without SDP offer was incomplete.<br/>Need to generate dummy offer for app.
   
== send PROGRESS after CALL-PROC to stop 10s T310 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=58839 58839]
|}
sometimes too short to forward a call
   
== IP-DECT: potential trap ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=58920 58920]
|}
Potential trap in DECT devices fixed.<br/>Trap identification:<br/>XCPT: no 2 (TLB load)  pc 94273278  ra 94273254  va 0000000c<br/>
   
== Gateway: A call counter with name containing blank or other special character created problems ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=58944 58944]
|}
It could be configured, but if another map was added to the same route the config was corrupted
''Status:''
gk.cpp
   
== Trap on CF remove while files are deleted ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=58984 58984]
|}
When files are deleted from the CF card and the card is removed or has an error, the box could trap.
   
== Potential trap if routes with DTMF output combined with pause chars (',') are used for calls without channel or out-of-channels ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=59012 59012]
|}
In this situation pause digits are passed to a channel, which does not exits. This causes the trap.<br/>Could also be dialed pause characters on a call-independent signaling.
''Status:''
relay.cpp
   
== SIP: Suppress Annex B of G.729 if "Silence Compression" is not enabled at the interface ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=57540 57540]
|}
Suppress Annex B of G.729 if "Silence Compression" is not enabled at the interface
   
== permit to send log messages, alarms and events via HTTPS with and without checking the server certificate ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=57785 57785]
|}
Both for the log server and for the alarm/event forward server HTTPS can be configured now.<br/>But because distribution of certifcates a may be problematic if there is a big number of clients checking the server certificate can be supressed by<br/><br/>  config add LOG0 /tls-unchecked<br/>
   
== IP-DECT: OEM device GUI ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=57993 57993]
|}
Some little changes for a DECT OEM device for the GUI.
   
== IP-DECT: TONE interface ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=58041 58041]
|}
The tone inferface is added to the IP1200.
   
== product_id 153,154 added ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=58122 58122]
|}
these new IDs are needed for IP152 based phone versions
   
== PBX dtmf group feature marks dynamic in groups ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=58536 58536]
|}
As the PBX dtmf group feature shows all dynamic in and out groups, the displayed name of dynamic in groups will be preceeded with '* ' now.
   
== SIP: Mapping of "403 Forbidden" into "Q.931 Requested circuit/channel not available" ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=58635 58635]
|}
Previously mapped into "Q.931 Call rejected"<br/>Better mapped into "Q.931 Requested circuit/channel not available" in order to trigger re-routing at the Gateway
   
== SIP: Support of P-Called-Party-ID ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=58748 58748]
|}
Get CDPN of incoming SIP calls from P-Called-Party-ID if present.<br/>
   
== 30s Timeout for dialing too short ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=58783 58783]
|}
When putting someone on hold with 'R' there was a timeout of 30s until the consultation call was terminated. This could be too short to find the one to whom to transfer the call.<br/><br/>The protocol timeout in H.323 (TO302) was increased from 30s to 120s
''Status:''
h323sig.cpp
   
== PBX: Don't apply Send Number to Recording calls ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=58878 58878]
|}
For recording it is usually needed to know the real number
''Status:''
pbx.cpp
   
== MWI key with configurable DTMF signaling type for message center calls ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=58980 58980]
|}
Some users must force inband DTMF for certain SIP providers but our Voice Mail requires out of band DTMF signaling.<br/>Now the type of DTMF signaling to be used for calls to the message center can be configured at the MWI key. 
   
== phone: disable call intrusion via partner key when recording is active ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=65918 65918]
|}
Call intrusion cannot be performed while recording is active:<br/>- recording establishes a 3party conference between local party, remote party and recorder.<br/>- call intrusion establishes a 3party conference between local party and the two remote parties<br/>- recording and call intrusion at the same time would require a 4party conference which cannot be set up because the phone has only 2 DSP coder channels.<br/><br/>Now if any kind of recording is configured call intrusion is neither offered in 'recall' menu nor performed via partner key.
   
= V8 Hotfix10 (80500.33) =
Changes included in Version 8 hotfix10<!---->
[http://mantis.innovaphone.com/view.php?id=59505 Definition]
 
 
   
== H.323 Remote address was not checked for calls coming in on special trunks with non-standard ports ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=58958 58958]
|}
This is no problem which affects innovaphone standard products. It is only for H.323 trunks configured with fixed remote and local address and port.
''Status:''
h323sig.cpp
   
== Interworked Control-Calls without Facilities Shall Stop in Relay ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=59009 59009]
|}
Interworked Control-Calls without Facilities Shall Stop in Relay
   
== PBX Exec Object: A number Map object to be used to call exec directly ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=59066 59066]
|}
A number map can be put in exec secretary or direct call groups to call the exec thru this Map Object directly. This did not work for calls from IP Phones, which sent a source name with the call.
''Status:''
pbx_exec.cpp
   
== PBX: Trap if using SOAP Version Method if PBX not started ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=59071 59071]
|}
null pointer access happens in this case
''Status:''
pbx_xml.cpp
   
== DHCP client: "Wait for selected Server" timeout was not applied after a DHCP restart ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=59076 59076]
|}
When the DHCP client receives a DHCP restart request a timer is setup to trigger the restart. The failure happens when an offer arrives before this timer fires.
   
== SIP: Media negotiation problem when processing INVITE without SDP ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=59082 59082]
|}
Media negotiation problem when processing INVITE without SDP
   
== H.323: Don't send a call-independent-signaling call without facilities ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=59088 59088]
|}
This could happen if a QSIG call was interworked, with facilities we do not support
''Status:''
h323_tbl.tbl<br/>h323sig.cpp<br/>h323sig.h<br/>phonesig.cpp
   
== send PROGRESS after CALL-PROC to stop 10s T310 - in ISDN Stack not PBX ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=59195 59195]
|}
sending PROGRESS in the PBX could have some unwanted side effects, like a Cisco Callmanager believing that there is actual in-band media available
''Status:''
pbx.cpp<br/>q931.cpp<br/>q931.h<br/>te_tbl.tbl<br/>nt_tbl.tbl<br/>isdn_interop.xsl
   
== H.323 slowstart avoid sending duplicate TerminalCapabilitySet messages ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=59203 59203]
|}
If a media re-negotiation happened on a remote system at a time the local H.245 channel was not even established, it could happen that a sequence of TCS, TCS0 and TCS again was sent to a calling system. This irritated especially a Cisco Call Manager.<br/><br/>This happened for example, if a call was received from the call manager on one PBX, which was routed to another PBX on which a CFNR was configured.
''Status:''
h323ch.cpp
   
== H.323 Slowstart media renegotiation did not work if TCS was not yet received ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=59248 59248]
|}
This caused a CFNR not being executed (call was cleared on the original called endpoint, but was not sent to new destination) for calls from Cisco Call Manager
''Status:''
h323ch.cpp
   
== PBX Mobility: Filters were not evaluated for mobility calls ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=59398 59398]
|}
Calls from mobile phones thru the mobility object were not affected by filter configurations for the user
''Status:''
pbx_mobility.cpp
   
== SNMP, ifSpeed wrong ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=59504 59504]
|}
SNMP, ifSpeed wrong
   
== SIP: Do not take P-Called-Party-ID as CDPN (rollback of 58748) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=59539 59539]
|}
Rollback of #58748<br/>Do not take P-Called-Party-ID as CDPN.<br/>P-Called-Party-ID contains nothing but the AOR of the receiving interface.
   
== SIP: Media negotiation problem in some early media scenarios ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=59711 59711]
|}
SIP/H323 interworking problem.<br/>Call was terminated with "504 Server Time-out" and "Recovery on timer expiry (102)"
''Status:''
sip.cpp
   
== Phone IP150 - dialling numbers containing asterisks '*' does not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=59768 59768]
|}
if in offhook mode the asterisk key is pressed for a short time the key is ignored, if it is pressed longer it is evaluated as mute key.
   
== SIP: Registration refresh interval not parsed from REGISTER response if behind NAT ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=59826 59826]
|}
Registration refresh interval not parsed from REGISTER response if behind NAT.<br/>Wrong handling of 'received' and 'rport' parameters in Via header (RFC-3581).
''Status:''
REGISTER sip:talk.arcstel.netpbx5.net SIP/2.0<br/>Proxy-Authorization: Digest username="1295_1",realm="talk.arcstel.netpbx5.net",nonce="12935856813:4d1dfa2cd75027df50e51d433f90d3a6",response="09e7e72f21d1772b12b73dffb5b51e3c",uri="sip:talk.arcstel.netpbx5.net",qop=auth,cnonce="b35c9f24e909d311",nc=00000001,algorithm=MD5<br/>Via: SIP/2.0/UDP 192.168.0.34:2057;branch=z9hG4bK-E9764661;rport<br/>From: <sip:1295_1@talk.arcstel.netpbx5.net>;epid=00013e01b12b;tag=847121008<br/>To: <sip:1295_1@talk.arcstel.netpbx5.net><br/>Call-ID: fc72cde0e909d3119b2500013e01b12b@192.168.0.34<br/>CSeq: 1001 REGISTER<br/>Contact: <sip:1295_1@192.168.0.34:2057;transport=UDP>;expires=3600<br/>Content-Length: 0<br/>Expires: 3600<br/>Max-Forwards: 70<br/>User-Agent: (Ascom IP-DECT Base Station/ [4.1.24/4.1.24/IPBS1-A3/4C])<br/>Allow-Events: reg,dialog,message-summary,presence<br/><br/>SIP/2.0 200 OK<br/>Via: SIP/2.0/UDP 192.168.0.34:2057;received=89.233.254.81;branch=z9hG4bK-E9764661;rport=58537<br/>From: <sip:1295_1@talk.arcstel.netpbx5.net>;epid=00013e01b12b;tag=847121008<br/>To: <sip:1295_1@talk.arcstel.netpbx5.net>;tag=5439c50a<br/>Call-ID: fc72cde0e909d3119b2500013e01b12b@192.168.0.34<br/>CSeq: 1001 REGISTER<br/>Contact: <sip:1295_1@192.168.0.34:2057;transport=UDP>;expires=54<br/>User-Agent: Advoco/5.0.3046<br/>Content-Length: 0
   
== PBX: Call was possible from registration as standby PBX ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=59844 59844]
|}
A standby PBX registers at the active PBX to check if it is alive. This registration could be misused for calls. It could be done with H.323 and SIP. This fix prohibits calls from this registration and allows registration with H.323 only
''Status:''
pbx.cpp
   
== Phone - switch off microphone while sending DTMF as voice data, increase volume of DTMF tones sent as voice data  ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=59846 59846]
|}
When "Registration x/General/No DTMF Detection" is checked DTMF tones are sent as voice data. Detection of such tones at the receiving side may fail when mixed with microphone input. 
   
== PBX CDR records with a size  near 1kB or larger were garbled when sent via HTTP ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=59966 59966]
|}
PBX CDR records with a size near 1kB or larger were garbled when sent via HTTP because of an encoding bug. Locally logging worked correct.   
   
== Phone: Translation for presence activities ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=60119 60119]
|}
  Abwesend, Besch„ftigt, Mittagessen, Besprechung, Urlaub<br/>  Away, Busy, Lunch, Meeting, Vacation<br/>  Parti, Occup‚, D‚jeuner, R‚union, Vacances<br/>  Assente, Occupato, Pranzo, Riunione, Ferie<br/>  Ausente, Ocupado, Comida, Reuni¢n, Vacaciones <br/>  Frav‘r, Opptatt, Lunsj, M›te, Ferie<br/>
   
== PBX: Trap if a call from mobile endpoint was diverted to a waiting queue, with altert Timeout ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=60161 60161]
|}
A NULL pointer access happend in this case while sending the ALERT message
''Status:''
pbx_wait.cpp
   
== Call Forwarding Function Key with "Apply 'Always' Setting Only" checkmark  (CFU  Only) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=59077 59077]
|}
If "Apply 'Always' Setting Only" is checked the Function key toggles onls over the 'Always' (i.e. CFU) entries and keeps other existing diversions untouched.<br/>Thus CFB or CFNR diversions set at the phone or at the PBX are not changed when toggling this key.
   
== SIP: Registration lookup by attribute 'username' of Authorization header ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=59078 59078]
|}
Registration lookup by attribute 'username' of Authorization header (not only on anonymized calls)
   
== x509: Support for DNS names in SubjectAltName extension of certificates ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=59171 59171]
|}
Create self-signed certificates and certificate requests that contain a DNS name in the SubjectAltName extension. Display the DNS name in the certificate details.
''Status:''
Files: x509.cpp, x509.h, x509asn1.h, request.xsl, certificate_create.xsl, certificate.xsl, oids_asn1.h
   
== SIP: Support for another Contact-URI parameter in REGISTER ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=59174 59174]
|}
+u.sip!model.ccm.cisco.com
   
== SIP: Interop feature "X-cisco-srtp-fallback" ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=59198 59198]
|}
Required for SRTP sessions
   
== H.323-Q.931-Interworking - display text provided in the Display Information Element of an ISDN Information Message on phone ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=59506 59506]
|}
The text provided in the Display Information Element of an ISDN Information Message was silently discarded. Now it is displayed in the phone status line.  <br/>
   
== SIP: Interop feature "X-cisco-sis-3.0.0" ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=59533 59533]
|}
Required for SRTP sessions
   
== Debug: Support to identify bad objects ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=59714 59714]
|}
Only mem-clients are allowed be deleted dynamically.
   
= V8 Hotfix11 (80500.34) =
Changes included in Version 8 hotfix11<!---->
[http://mantis.innovaphone.com/view.php?id=60189 Definition]
 
 
   
== SIP: Handling of re-INVITE w/o SDP offer while in held (inactive) state ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=60296 60296]
|}
A re-INVITE w/o SDP offer while in held (inactive) state must be answered with 200/Ok containing an sendrecv offer (not inactive).
   
== SIP: SRTP re-negotiation failed sometimes ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=60387 60387]
|}
After switching to non-encrypted media (MOH) the re-negotiation for encrypted media failed (on CCM).
   
== PBX: Slave license update period too short ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=60390 60390]
|}
was 100s (v8) or 10s (v7) should be 10min
''Status:''
pbx.h
   
== Gateway: Trap on early RELEASE from calling side ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=60400 60400]
|}
Trap when Notification Indicator is received with ALERT while peer call is released already.
   
== IP-DECT: potential trap ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=60406 60406]
|}
Some pointer checks are added to prevent traps.
   
== PBX Waiting object: Problem with announcements from Boolean Object ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=60421 60421]
|}
The announcement worked, but if DTMF dialing to another Waiting object was done, DTMF dialing on this second Waiting object did not work anymore.
''Status:''
pbx.cpp<br/>pbx_api.h<br/>pbx_wait.cpp
   
== PBX CF Loop detection indicated loop with CFNR even if there was no loop ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=60427 60427]
|}
A CFNR loop is only detected if the CFNRs are executed because of no registration. The loop was detected with a single Object without registration instead of only detecting the loop if all objects are without registration
''Status:''
pbx.cpp
   
== H.323: If INFO was sent with cdpn and kp it could happen that it was forwarded with cdpn in SETUP and kp in INFO ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=60443 60443]
|}
If a call was established by the application (or incoming signaling) without dialing information and then before the TCP connection was established a INFO message was sent with keypad and called-party-number, the call (SETUP) was sent with the called-party-number followed by an INFO with keypad.<br/><br/>This could result in a duplication of the dialed digits.<br/><br/>Only in special OEM scenarios, because keypad is usually not used.
''Status:''
h323_tbl.h
   
== editing function keys via WEB interface broken after invalid characters have been entered in an e164 number field ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=60468 60468]
|}
xml syntax characters like < > &amp; entered in a number field were not encoded on output and thus garbled the xml structure   
   
== Memory leak when configuring H.323 NAT ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=60474 60474]
|}
Memory leak when configuring H.323 NAT
   
== possible trap with enabled trace flag on CF checkdisc ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=60513 60513]
|}
The box could trap while checking the card, if the trace flag for CF0 was enabled.
   
== PBX/SOAP: Potential trap when disconnecting a mobility call ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=60538 60538]
|}
If a SOAP application (e.g. TAPI) disconnects a call to/from a mobile user, a trap could happen
''Status:''
pbx_xml.cpp
   
== PBX DECT System object: DECT parameters got lost, when changing critical flag ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=60565 60565]
|}
The object was written back to flash without the parameters stored by the DECT system
''Status:''
pbx.cpp<br/>pbx.h<br/>pbx_api.h<br/>pbx_dect.cpp<br/>pbx_dect.h
   
== PBX SOAP Admin: Critical flag could not be set in object ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=60568 60568]
|}
The attribute "critical" was not allowed
''Status:''
pbx.cpp
   
== Ldap Replication, Problems with Percent-Char in Password ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=60611 60611]
|}
Ldap Replication, Problems with Percent-Char in Password
   
== Optional display of text provided in the Display Information Element of an ISDN Information Message ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=60612 60612]
|}
The text provided in the Display Information Element of an ISDN Information Message is displayed at the phone status line.<br/>This may be supressed now by checking "Phone/Preferences/Hide Display Info from ISDN Providers" <br/>
   
== SIP: Authentication issue (AVAYA-SM interworking) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=60712 60712]
|}
Another re-try with authentication required.
   
== Group Indication with a diverting number of zero length caused a encoding error ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=60715 60715]
|}
The number should not be sent at all. This happend if a group indication was to be sent from a call which was diverted by an object without number
''Status:''
h450.cpp
   
== PBX Waiting: Don't forward DTMF to announcement source ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=60838 60838]
|}
Announcement source could be a boolean object and DTMF could change the state of the boolean
''Status:''
pbx_wait.cpp
   
== IP-DECT: cause code changed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=60958 60958]
|}
The cause code is changed to "cause unassigned number" if the call is released because no radios are available.
   
== Fix for SIP requests with 10+ header instances ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=61014 61014]
|}
Response to following INVITE request did not returned all Via headers:<br/><br/>INVITE sip:229@192.168.193.181:2058;transport=UDP SIP/2.0<br/>Record-Route: <sip:145bf82@192.168.193.210;transport=udp;lr><br/>Record-Route: <sip:192.168.193.219:15060;lr;sap=433098584*1*016asm-callprocessing.sar-624908352~1296718381566~-535462628~1><br/>From: "H323-2" ;tag=8084387dbc40e01d7f4d42da8200<br/>To: <sip:229@localdomain.com><br/>Call-ID: 8084387dbc40e01d8f4d42da8200<br/>CSeq: 1 INVITE<br/>Via: SIP/2.0/UDP 192.168.193.210;rport;branch=z9hG4bKC0A8C1DBFFFFFFFFDEB7B1F9099903-AP;ft=192.168.193.210~13c4<br/>Via: SIP/2.0/UDP 192.168.193.219:15070;branch=z9hG4bKC0A8C1DBFFFFFFFFDEB7B1F9099903<br/>Via: SIP/2.0/UDP 192.168.193.219:15070;branch=z9hG4bKC0A8C1DBFFFFFFFFDEB7B1F9199901<br/>Via: SIP/2.0/UDP 192.168.193.219:15070;branch=z9hG4bKC0A8C1DBFFFFFFFFDEB7B1F9199900<br/>Via: SIP/2.0/TLS 192.168.193.210;branch=z9hG4bK8084387dbc40e01d7f4d42da8200-AP;ft=6565<br/>Via: SIP/2.0/TLS 192.168.193.104;branch=z9hG4bK8084387dbc40e01d7f4d42da8200;avaya-cm-term-reaction=shortcut<br/>Via: SIP/2.0/TLS 192.168.193.210;branch=z9hG4bKC0A8C1DBFFFFFFFFDEB7B1F9099899-AP;ft=7355<br/>Via: SIP/2.0/TLS 192.168.193.219:15080;branch=z9hG4bKC0A8C1DBFFFFFFFFDEB7B1F9099899<br/>Via: SIP/2.0/TLS 192.168.193.219:15080;branch=z9hG4bKC0A8C1DBFFFFFFFFDEB7B1F9199897<br/>Via: SIP/2.0/TLS 192.168.193.219:15080;branch=z9hG4bKC0A8C1DBFFFFFFFFDEB7B1F9199896<br/>Via: SIP/2.0/TLS 192.168.193.210;branch=z9hG4bK8084387dbc40e01d9f4d42da8200-AP;ft=6565<br/>Via: SIP/2.0/TLS 192.168.193.104;branch=z9hG4bK8084387dbc40e01d9f4d42da8200<br/>Supported: 100rel,histinfo,join,replaces,sdp-anat,timer<br/>Allow: INVITE,ACK,OPTIONS,BYE,CANCEL,SUBSCRIBE,NOTIFY,REFER,INFO,PRACK,PUBLISH<br/>User-Agent: Avaya CM/R016x.00.1.510.1 AVAYA-SM-6.1.0.0.610012<br/>Contact: "H323-2" <sip:201@192.168.193.104:5061;transport=tls><br/>Accept-Language: en<br/>Accept-Contact: *;+avaya-cm-line=1<br/>Alert-Info: <cid:internal@localdomain.com>;avaya-cm-alert-type=internal<br/>History-Info: <sip:229@localdomain.com>;index=1<br/>History-Info: "229" <sip:229@localdomain.com>;index=1.1<br/>Min-SE: 1200<br/>P-Asserted-Identity: "H323-2" <sip:201@localdomain.com><br/>Record-Route: <sip:145bf82@192.168.193.210;transport=tls;lr><br/>Record-Route: <sip:192.168.193.219:15061;transport=tls;lr;sap=433098584*1*016asm-callprocessing.sar-624908352~1296718381477~-535462632~1><br/>Record-Route: <sip:145bf82@192.168.193.210;transport=tls;lr><br/>Record-Route: <sip:192.168.193.104:5061;transport=tls;lr><br/>Session-Expires: 1200;refresher=uac<br/>Content-Type: application/sdp<br/>Content-Length: 178<br/>P-Location: SM;origlocname="Interoplab";termlocname="Interoplab"<br/>Max-Forwards: 63<br/><br/>v=0<br/>o=- 1296719515 1 IN IP4 192.168.193.104<br/>s=-<br/>c=IN IP4 192.168.193.105<br/>b=AS:64<br/>t=0 0<br/>m=audio 2564 RTP/AVP 8 18 96<br/>a=fmtp:18 annexb=no<br/>a=rtpmap:96 telephone-event/8000<br/>
   
== SIP: Do not send INFO(dtmf) before call is connected ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=61025 61025]
|}
Do not send INFO(dtmf) before dialog is in confirmed state.
   
== SIP: Interop flag for Avaya: /no-t38-in-initial-offer ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=59176 59176]
|}
config change SIP /no-t38-in-initial-offer<br/>Can be used to suppress T.38 capability indication in initial SDP offer.<br/>A switch to T.38 fax mode may follow, if T.38 is enabled at the interface.
   
== SIP: Add PAI/PPI header to 200/Ok for INVITE ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=60249 60249]
|}
Some SIP servers wants us to send P-Asserted-Identity/P-Preferred-Identity header in final INVITE response.
   
== IP-DECT: number map for incoming calls (OEM) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=60294 60294]
|}
Number map for incoming calls added for OEM devices.
   
== SIP: Add PAI/PPI header to 181 response for INVITE ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=60438 60438]
|}
To get full identity information of the new remote partner
   
== SIP: Module option /share-local-port ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=60542 60542]
|}
This option forces outbound TCP signaling connection to be bound to the same local port as the signaling interface is listening on.<br/>(In order to make the remote peer do connection reuse)
   
= V8 Hotfix12 (80500.36) =
Changes included in Version 8 hotfix12<!---->
[http://mantis.innovaphone.com/view.php?id=60894 Definition]
 
 
   
== IP2x/30x: T.38: Option for  high speed data redundancy  ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=60866 60866]
|}
to configure this option use <br/>http://addr/AC-DSP0/mod_cmd.xml?xsl=dsp.xsl
   
== IP2x/30x: T.38: Calling tone (CNG) detect didnt work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=60879 60879]
|}
to configure this option use <br/>http://addr/AC-DSP0/mod_cmd.xml?xsl=dsp.xsl
   
== IP3xx: Trap if switching a PBX from Standy to Off ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=60956 60956]
|}
This happens because we try to unregister from a CONF interface, which does not exist on the IP3xx platform
''Status:''
pbx.cpp
   
== SIP: Trap when receicing provisional response for obsolete INVITE ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=61035 61035]
|}
In overlap dialing scenarios overlapping INVITE client transactions are used.<br/>Same Call-ID, different CSeq and different To-URI.
   
== SIP: Read PAI/PPI header when receiving MESSAGE request ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=61086 61086]
|}
Read PAI/PPI header when receiving MESSAGE request in order to get calling party identity
   
== Phone: Memory leak when deleting SIP registration ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=61132 61132]
|}
Failed to delete registration, but only if trying to delete during state "rgistration failed due to no response from server".
   
== H.450 encoding problem with call-transfer and diverting facilities, if length of number was 0 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=61222 61222]
|}
A zero lenght number cannot be encoded, it must be omited from the message
''Status:''
h450.cpp
   
== SIP: Bug in handling of re-direct responses ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=61264 61264]
|}
New remote port was not respected when maddr parameter was present in redirection URI.<br/>E.g.<br/><br/>  sip:662@10.0.77.46:4432;user=phone;transport=Tcp;maddr=10.0.77.46;x-mss-call-id=a515c882e909d311874700903306177f%4010.0.77.70
   
== IP2x/IP30x: T38: Missing "no signal indications" on remote initiated T.38 session ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=61273 61273]
|}
This solves a problem with SIP-Provider behing a NAT router on outgoing fax calls.<br/>
   
== Critical Flag at DECT System Object disappears ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=61318 61318]
|}
If the DECT system is replicated from the PBX and systems settings are changed on the DECT system, the critical flag on the DECT System object in the PBX is lost
''Status:''
dectusers.cpp<br/>dectusers.h
   
== Calls redialled from call list were not set up with CLIR although CLIR was active for the original call ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=61321 61321]
|}
The CLIR setting of the original call was saved in the call list but not applied when the call was redialled from list.
   
== CFNR at PBX object, was executed on call to busy endpoint ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=61323 61323]
|}
should only be executed registration down or no respone at all
''Status:''
pbx.cpp
   
== phone: function key Boolean Object with 'Toggle State' checked did not display the correct state sometimes ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=61368 61368]
|}
This happened when the state of the boolean object was toggled from 'manual-on' to 'automatic-off' state at the PBX or by another phone with such a key. It did not happen when with a key where the 'Toggle State' checkmark was not set. 
   
== SIP: No overlap sending if 'sending complete' was declared ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=61472 61472]
|}
Do not start overlapping INVITE transaction for new dialing digit if 'sending complete' was indicated for the call.
   
== PBX phone config templates could overrun when a big number of function keys was configured ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=61476 61476]
|}
There was a general 4kB size limitation for attributes read from LDAP directory which was too small for the 'phone' attribute of a config template.   
   
== Webdav: Bad encoding of special characters in XML properties ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=61505 61505]
|}
Bad encoding of file/folder names containing special characters.
   
== do not open multiple HTTP sessions when forwarding a big number of alarms in a short time ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=61527 61527]
|}
when alerm forwarding is active the fault handler passed new alarms immediately to the forwarding httpclient and httpclient opens a new session when there is no idle session.
   
== PBX: Boolean Function Key was not updated when joining group ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=61590 61590]
|}
For the Boolean function key it is required to receive Group Indications from the Boolean object, which does not happen if the phone is not member of the group (dynamic out). When joining the group an update should be sent to the phone.
''Status:''
pbx.cpp<br/>pbx.h<br/>pbx_gi.cpp<br/>pbx_gi.h<br/>pbx_bool.cpp
   
== Possible to configure use of Feature Codes on Basic Rate ISDN ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=61620 61620]
|}
This configuration option is not useful on ISDN BRIs. In fact it usually results in unexpected behaviour.<br/><br/>This option is removed from the user interface.
''Status:''
ip800/platform/config.h<br/>ip24/platform/config.h
   
== IP-DECT: OEM module update function ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=61671 61671]
|}
The update function for an OEM module was changed.
   
== IP-DECT: trap with call transfer ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=61676 61676]
|}
Null pointer trap with call transfer and release event from the DECT side.<br/>Trap identification, IP1200, V8 Hotfix 10:<br/>XCPT: no 2 (TLB load)  pc 943fd6d4  ra 94278e9c  va 0000000c<br/>
   
== PBX-SOAP: Admin function removed password if Object Long Name (cn) was changed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=61725 61725]
|}
If the cn is changed the object must be identified by guid an the password of this old object is to be used
''Status:''
pbx.cpp
   
== PBX-SOAP: Admin function could not be used to configure "phone-config" ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=61726 61726]
|}
"phone-config" was missing in the list of allowed attributes
''Status:''
pbx.cpp
   
== SNMP, If Index sometimes missing in interfaces walk ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=61985 61985]
|}
SNMP, If Index sometimes missing in interfaces walk
   
== SIP: Very large SIP request headers were rejected with 414 Request-URI Too Long ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=62033 62033]
|}
SIP request headers larger than 2000 bytes were rejected with 414 Request-URI Too Long
   
== ISDN, QSIG, NT, Invalid Progress message was sent ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=62190 62190]
|}
The mandatory Progress Indicator was missing in Progress message when rejecting a call. This could cause that the inband busy tone could not be sent.
''Status:''
nt_tbl.h
   
== Phone: New config option "Proxy" for SIP registrations ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=59396 59396]
|}
Now DNS names can be specified.<br/>Replaces config option "Primary Server Address".
   
== phone: " reject if busy" option for incoming announcement calls ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=61412 61412]
|}
In some scenarios it's required that announcement calls are not accepted when the phone is busy.
   
== v8 Firmware for IP6010, IP3010, IP1060, IP0010 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=61522 61522]
|}
Version 8 Firmware will be released for the new IP6010 Gateway familiy as part of a hotfix release.
   
== IP-DECT: Abnormal call release error event ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=61705 61705]
|}
Now the DECT Master sends an error event to the event logger every time if an abnormal call release occurs.
   
== new: phonesig api method to restart registration process without deregistration ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=62165 62165]
|}
WLAN phones we need a way to restart a RAS registration when coming back from a out-of-coverage condition to syncronize the handsets and PBX's registration state.
   
= V8 Hotfix13 (80500.37) =
Changes included in Version 8 hotfix13<!---->
[http://mantis.innovaphone.com/view.php?id=63025 Definition]
 
 
   
== SIP: INVITE after redirect must not contain the old remote tag ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=62263 62263]
|}
INVITE after redirect did contain the old remote tag.<br/>Now it is cleared before new INVITE is sent to new destination.
   
== SIP: Expect early inband information if 180 with SDP answer is received ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=62275 62275]
|}
Expect early inband information if 180 with SDP answer is received
   
== PBX Quickdial: Transferscenario leaves orphaned call ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=62311 62311]
|}
PBX Quickdial: Transferscerio leaves orphaned call<br/>The orphaned call remains under PBX/Calls and cannot be cleared.
   
== License: License upload shows error "No licenses available" ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=62318 62318]
|}
"No licenses available" when uploading license XML.
   
== Do SRTP Re-keying when doing media renegotiation ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=62325 62325]
|}
Using the same SRTP key could be a security issue. When after a transfer the same SRTP keys are used, in theory the party doing the transfer could still decrypt the SRTP even if not in this call anymore
''Status:''
h323ch.cpp<br/>media.cpp<br/>channel.cpp<br/>channel.h
   
== phone: a call unparked by a phone with recording active was released instead of reconnected  ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=62367 62367]
|}
When the phone receices the SETUP indicating the unparked call the call should be automatically connected and become the active call. This failed because the currently active call was not put on hold before and thus there was no free DSP cannel to connect the unparked call.
   
== Polish Language could not be configured in the PBX Phone Config ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=62410 62410]
|}
The table entry for polish language was missing
   
== General btree library problem: Potential Trap if many outgoing registrations need to be retried ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=62428 62428]
|}
Actually the problem is in the commonly used btree library, but there are not that many cases in which the libray is used in a way that create the problem
''Status:''
btree.cpp
   
== PBX Waiting: Limited DTMF targets could be added using Internet Exporer ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=62432 62432]
|}
URL size limitiation of IE -> use POST instead
''Status:''
pbx_edit_waiting.xsl
   
== PBX Waiting: Connected Number handling different from normal Connected Number Handling ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=62437 62437]
|}
This caused different behaviour whether the operator answered the call on a SIP or H.323 phone. In case of SIP the Connected Number was sent, in case of H.323 not
''Status:''
pbx.cpp<br/>pbx.h
   
== SIP: Media negotiation failed when interworking with H.323 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=62439 62439]
|}
When calling from H323 to a user with multiple registrations<br/>and the called user accepts on one of its (SIP type) secondary registration,<br/>the media negotiation can fail.
   
== PBX: Progress Indicator in Alert not forwarded by PBX ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=62483 62483]
|}
This could result in in-band info not played at receiving phone in case no progress incator was sent in previous message of same call
''Status:''
pbx.cpp
   
== VM, &lt;pbx-forward&gt;, two display names were sent ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=62505 62505]
|}
VM, <pbx-forward>, two display names were sent
   
== Call Completion to MD110 didn't work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=62512 62512]
|}
Call Completion to MD110 didn't work
   
== VM, Smtp authentication sometimes in-place, although not required ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=62571 62571]
|}
VM, Smtp authentication sometimes in-place, although not required<br/>
   
== SIP: Media negotiation issue ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=62606 62606]
|}
Handling of re-INVITE w/o SDP offer in 'held' state requires change.<br/>
   
== PBX: Blind transfer with consultation to mobile endpoint -&gt; Retrieve missing ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=62638 62638]
|}
The caller is put on hold for the consultation, but is not retrieved when the transfer happens. If the caller is SIP, this results in no media sent.
''Status:''
pbx.cpp
   
== Possible trap on certain compact flash operations ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=62703 62703]
|}
There has been the possibility of a trap on certain compact flash file operations.<br/>This trap has been fixed.
   
== DHCP client: timeout for response to a REQUEST too small in some case ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=62709 62709]
|}
When the DHCP client REQUESTs an OFFERed address a variable timeout (min 2 seconds) is set up. In the case in question the server always responds to DISCOVERs and REQUESTs with a delay of a little bit more than 2 seconds and thus a new DISCOVER was triggered a short time before the ACK arrived.<br/>To overcome this problem the minimum timeout is changed to 5 seconds which should be enough for any server. 
   
== ADSP driver: initialization changed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=62869 62869]
|}
The ADSP2191 initialization is changed. This fixes some missed voice channels in conference calls.
   
== ISDN, QSIG, NT: No Disc Option can be used to send PROGRESS instead of DISC ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=62879 62879]
|}
DISC message causes some PBX to release a call right away, so that no in-band busy tone can be played. In this case just to send PROGRESS is better.
''Status:''
nt_tbl.h
   
== Diagnostic/Tracing on IP6000: Trace flag on TEL could not be cleared ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=62914 62914]
|}
once set, it could only be cleared with a !config change command
''Status:''
tracing.xsl
   
== CAS E1 3bit pulse dialing ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=62191 62191]
|}
Support for CAS E1 3bit pulse dialing, which is sometimes used instead of DTMF addressing.
   
== RPCAP uses system time instead of uptime now ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=62745 62745]
|}
A wireshark capture with RPCAP will now receive packet timestamps with the system time and not the uptime anymore.
   
== Gateway Routing: Support of '?' wildcards in CGPN and CDPN output ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=62809 62809]
|}
In the routing table digits received at places marked with '?' are forwarded to the respective '?' in the output number. This works for CDPN and CGPN maps in routes. It does not work in interface maps
''Status:''
gk.cpp<br/>gk.h
   
= V8 Hotfix14 (80500.47) =
Changes included in Version 8 hotfix14<!---->
[http://mantis.innovaphone.com/view.php?id=63026 Definition]
 
 
   
== H.323: Don't send a call-independent-signaling call without facilities and user-user information ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=62961 62961]
|}
This fix is related to the fix #59088.<br/>A call-independent-signaling call without facilities should not be sent, but if it has got a user-user information, it should be sent.<br/>This fixes the DECT messaging problem on the IP1200.
''Status:''
h323sig.cpp
   
== TCP: Ack was not sent under special conditions with re-transmissions ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=62965 62965]
|}
This could cause the breaking of a TCP connection in case of packet loss, even if the packet loss was not too bad
''Status:''
tcp.cpp
   
== Trap when processing webdav requests ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=62980 62980]
|}
Trap when webdav request session were terminated irregularly.
   
== SIP: Bad encoding of To-URI in INVITE when handling REFER with special chars in user part of Refer-To URI ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=63030 63030]
|}
Refer-To: <sip:+49231395710880_(399)@172.20.173.104><br/>received with REFER was mangled into<br/>To: <sip:%2049231395710880_(399)@172.20.173.104><br/>and send in INVITE
   
== HTTP-Server: Closing connection after transaction causes trouble with Webdav client ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=63045 63045]
|}
NetDrive client fails when uploading files
''Status:''
http.cpp
   
== Webdav: Bug when handling GET with Range header ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=63131 63131]
|}
When applied on a zero length file this response was returned:<br/><br/>\tHTTP/1.1 206 Partial Content<br/>\tDate: Tue, 12 Apr 2011 14:52:23 GMT<br/>\tServer: innovaphone Virtual Appliance / 9.00 dvl [xxx/1000/0]<br/>\tAccept-Ranges: bytes<br/>\tContent-Type: application/octet-stream<br/>\tContent-Length: 0<br/>\tContent-Range: bytes 0-4294967295/0<br/><br/>Error response "416 Requested Range Not Satisfiable" must be returned instead.
   
== Webdav: Don't keep zero-length files open on server side ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=63133 63133]
|}
In case of large files, NetDrive performes GET operation between PUT0 and PUT.<br/>The actual PUT was rejected with 500 error resonse then.
   
== 62879: ISDN, QSIG, NT: No Disc Option can be used to send PROGRESS instead of DISC - fix for this fix ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=63209 63209]
|}
This fix from hotfix13 did only for calls on which a CALL-PROC was sent as well. For calls still in overlap dialing (only SETUP-ACK sent) it did not work
''Status:''
nt_tbl.tbl
   
== SIP: Fix for dialog-info notification ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=63249 63249]
|}
NOTIFY for dialog state 'terminated' was missing sometimes.
   
== SIP: Trap when session timer is used ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=63271 63271]
|}
Trap on collision of session timer and call release
   
== SIP: Authentication passwords were truncated ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=63321 63321]
|}
Authentication failed because password was truncated.
   
== SIP: Not accepting calls from alternative proxy ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=63327 63327]
|}
When being registered at a proxy with 2 ip addresses the gateway does not accept calls from the alternative ip address.
   
== New flash S29GL256P90/S29GL128P90 on IP1200 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=58643 58643]
|}
This flash is used on new IP1200 devices.<br/>Bootcode downgrade to older bootcode is disabled.<br/>If the bootcode is downgraded the bootcode version is shown as 1013.
   
== SNMP, innoColdStart Trap to be sent only after sw failure or button reset ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=63160 63160]
|}
Settlement of a feature request to have the innoColdStart SNMP trap indicate severe reboot reasons only.<br/>
   
== DECT: GUI password input limit info ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=63349 63349]
|}
The user password is truncated to 15 signs. Now the input field is limited and an info is shown.
   
== support for external ringer unit ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=63358 63358]
|}
some special purpose phones may be equipped with an external ringer unit. the information controlling the internal ringer is now passed to the module controlling the external ringer unit.
   
= V8 Hotfix15 (80500.49) =
Changes included in Version 8 hotfix15<!---->
[http://mantis.innovaphone.com/view.php?id=63485 Definition]
 
 
   
== PBX: License mechanism changed to allow easy migration to new version ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=63381 63381]
|}
- licences of different versions may be installed<br/>- check for min version<br/>- v8 master can act as license master for v9 licenses<br/>- applications may run on older version
''Status:''
inno_lic.cpp<br/>inno_lic.h<br/>pbx.cpp<br/>pbx_api.h<br/>pbx_general.xsl<br/>pbx_edit_loc.xsl<br/>
   
== PBX: Trunk - don't retry call to next gateway if wrong number ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=63386 63386]
|}
all gateways registered to a trunk are by definition to the same network, so a rerouting is useless, if the cause indicates that the dialed number was wrong
''Status:''
q931lib.h
   
== Command traps in minifirmware on joining or leaving Kerberos realms ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=63415 63415]
|}
Because command does not check if kerberos_client_provider::provider is null.<br/><br/>Files: command.cpp
   
== TEL and PRI1-4 not contained in 'PPP connection port' dropdown menu on ip6010, ip3010 and ip1060 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=63419 63419]
|}
'PPP connection port' dropdown should contain TEL and PRI1-4
''Status:''
ip_config.cpp
   
== V9 und V8 PPP port configuration geht nicht richtig auf ip6010 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=63427 63427]
|}
Da erscheint in V9 bei Auswahl von PPPOE das ISDN Menu, dafr ist bei <none> jetzt kein weiterfhrendes Men sichtbar. Das sollte auch bei V8 so sein.<br/><br/>Bei V8 erscheint derzeit auch bei <none> das ISDN Menu, dafr ist bei V8 das PPPOE Men korrekt vorhanden wenn man PPPOE0/1 als Schnittstelle ausw„hlt.<br/>
   
== ip0010 wizard configures PRI1, gateway/interfaces shows PRI1 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=63430 63430]
|}
PRI1-L1 must be renamed into PRI1-CLK
''Status:''
config.h, ip6010.cpp
   
== HTTP-Client: Bad encoding of uri parameter in digest authentication ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=63469 63469]
|}
Uri parameter in digest authentication was not URL encoded
   
== Gateway: Outgoing Call Completion did not work when outgoing call was routed through TONE interface ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=63517 63517]
|}
Outgoing CC request did not went out to ISDN interface.
   
== SIP: Message buffer too small for REGISTER request for re-try with authentication ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=63539 63539]
|}
On some installations a change-of-nonce at server side may cause volatile "Registration down error" on client side.
   
== certain non latin-1 characters entered via WEB interface or provided by an external LDAP Server cause display errors ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=63591 63591]
|}
entering such characters via copy/paste as when editing a PBX object may result in an xml-error when showing PBX objects.<br/>when such characters are provided by an external LDAP Server to a phone the display may get cleared.<br/>Now such characters are transcribed to a single latin1 character or replaced by a '-' if no transscription is available.
   
== Web-UI: PBX password length is limited to 15 chars ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=63640 63640]
|}
Added tooltip and fixed maxlength attribute on input elements.
   
== License: Character encoding problem ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=63645 63645]
|}
Character encoding problem
   
== config download may trap when malformed LDAP config data  has been uploaded ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=63678 63678]
|}
a buffer overrun happens on config download when a "mod cmd FLASHDIR0 add-view nnn cn=..." line with a length > 63 characters has been uploaded. 
   
== Presence functionality is not available when registered via H323 at a non-innovaphone PBX ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=63745 63745]
|}
Presence operations via H323 are encoded in private facility elements which are unknown to a non-innovaphone PBX. Presence control calls sent to such a PBX may be misunderstood and routed back as normal voice call to the sending phone.<br/>Thus no presence control calls must be sent to such a PBX.
   
== Trap when starting from flash_stick ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=63752 63752]
|}
and flash memory not yet programmed with bootcode
''Status:''
ip6010.cpp
   
== SIP: Allocated message size to small for INVITE redirect response (Avaya) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=63829 63829]
|}
Memory allocation is a bit to tight to fit the message due to many Via headers.<br/><br/>INVITE sip:3003@192.168.150.140:2059;transport=UDP SIP/2.0<br/>Record-Route: <sip:5793d7f@192.168.150.115;transport=udp;lr><br/>Record-Route: <sip:192.168.150.114:15060;lr;sap=315810451*1*016asm-callprocessing.sar1905633216~1304428214402~-1054885358~1><br/>Via: SIP/2.0/UDP 192.168.150.115;rport;branch=z9hG4bKC0A896726E7526620194612-AP;ft=192.168.150.115~13c4<br/>Via: SIP/2.0/UDP 192.168.150.114:15070;branch=z9hG4bKC0A896726E7526620194612<br/>Via: SIP/2.0/UDP 192.168.150.114:15070;branch=z9hG4bKC0A896726E7526621194610<br/>Via: SIP/2.0/UDP 192.168.150.114:15070;branch=z9hG4bKC0A896726E7526621194609<br/>Via: SIP/2.0/TCP 192.168.150.115;branch=z9hG4bK0e2106b7388e016424db9a29200-AP;ft=11786<br/>Via: SIP/2.0/TCP 192.168.150.118;branch=z9hG4bK0e2106b7388e016424db9a29200;avaya-cm-term-reaction=shortcut<br/>Via: SIP/2.0/TCP 192.168.150.115;branch=z9hG4bKC0A896726E7526620194608-AP;ft=12651<br/>Via: SIP/2.0/TCP 192.168.150.114:15070;branch=z9hG4bKC0A896726E7526620194608<br/>Via: SIP/2.0/TCP 192.168.150.114:15070;branch=z9hG4bKC0A896726E7526621194606<br/>Via: SIP/2.0/TCP 192.168.150.114:15070;branch=z9hG4bKC0A896726E7526621194605<br/>Via: SIP/2.0/TCP 192.168.150.115;branch=z9hG4bK0e2106b7388e018424db9a29200-AP;ft=11786<br/>Via: SIP/2.0/TCP 192.168.150.118;branch=z9hG4bK0e2106b7388e018424db9a29200<br/>Via: SIP/2.0/TCP 192.168.150.84;branch=z9hG4bK200_f1774512c29cc2e5cd78966_I2371<br/>User-Agent: Avaya one-X Deskphone AVAYA-SM-6.1.1.0.611023 Avaya CM/R016x.00.1.510.1<br/>Record-Route: <sip:5793d7f@192.168.150.115;transport=tcp;lr><br/>Record-Route: <sip:192.168.150.114:15060;transport=tcp;lr;sap=315810451*1*016asm-callprocessing.sar1905633216~1304428214355~-1054885362~1><br/>Record-Route: <sip:5793d7f@192.168.150.115;transport=tcp;lr><br/>Record-Route: <sip:192.168.150.118;transport=tcp;lr><br/>Session-Expires: 1800;refresher=uac<br/>Content-Type: application/sdp<br/>Content-Length: 215<br/>...
   
== IP152: Flash access not working with version 8050047 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=64009 64009]
|}
With fix #58643 16 bit access to spansion flash doesnt work
''Status:''
boot_coldfire.mak common.mak flash_coldfire.c
   
== No received cause code should be treated as 'normal clearing' ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=64043 64043]
|}
Was sometimes treated as cause code to do re-routing. This happened esspecially with multiple registrations to v8 gateway object. A call sent successfully to the gateway on the first regsitration was sent again on the second registration after call clearing.
''Status:''
q931lib.cpp<br/>relay.cpp
   
== missing response 'reset required' when changing PRIx-Lx config options ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=64055 64055]
|}
changing i.e. the ,NT-Mode' config option didn't show the 'reset required' link button after pressing 'OK'.
''Status:''
falc56_drv.cpp, config.h ipac_drv.cpp V9:falc56_drv.xsl
   
== PBX: Transfer Recall timer was not started if destination was ringing after blind transfer ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=64064 64064]
|}
After a blind transfer without consultation to a busy destination the recall timer should be started as soon as the destination is not busy anymore and the call is delivered
''Status:''
pbx.cpp
   
== Gateway: Allow interface maps for analog interfaces as well ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=64068 64068]
|}
Was prohibited in the past, but there are uses for this.
''Status:''
ip24/config.h
   
== Conference on IP6000 Hardware 200 and lower not working with v8hf14 and v9 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=64132 64132]
|}
The ADSP serial port has been changed from SPORT1 to SPORT0 for the IP6010.<br/>Old IP6000 hardware has the SPORT0 not connected, so now SPORT1 is again used on IP6000.<br/>
   
== PBX: Potential Trap on calls to exec, map or waiting object ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=64135 64135]
|}
under some rare circimstances, which are unfortunatly not known, there could be a NULL pointer access
''Status:''
pbx_exec.cpp<br/>pbx_wait.cpp<br/>pbx_map.cpp
   
== DECT: Radio firmware for new handsets ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=63577 63577]
|}
The new radio firmware PCS05Ah accepts new handsets with the new IPEI number range.
   
== phone: improved czech display texts ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=63998 63998]
|}
now all texts are translated to czech, previous errors were fixed (translations provided by zakharova@annexnet.cz)
   
= V8 Hotfix17 (09-80500.55) =
Changes included in Version 8 hotfix17<!---->
[http://mantis.innovaphone.com/view.php?id=65485 Definition]
 
 
   
== SIP: Session refresh was taken as session modification ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=63310 63310]
|}
Local SRTP key was re-calculated after re-INVITE for session refreh was received.<br/>Causes SRTP decode error at remote side.<br/>CUCM scenario
   
== IP6010, IP6000: Use optimized memcpy ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=64587 64587]
|}
Use of load/store multiple and shifts for 32 bit alignment speeds up memcpy by a factor of approx 2<br/><br/>Orginal memcpy<br/><info product="IP6010" mips="800Mips"><br/><memcpy bytes="1000000" time="2ms" speed="347.826Mbyte/s"/><br/><read bytes="1000000" time="2ms" speed="347.826Mbyte/s"/><br/><write bytes="1000000" time="2ms" speed="470.588Mbyte/s"/><br/><stack_memcpy bytes="1000000" time="7ms" speed="133.333Mbyte/s"/><br/><uncached_memcpy bytes="1000000" time="41ms" speed="24.169Mbyte/s"/><br/><aes bytes="1000000" time="135ms" speed="7.373Mbyte/s"/><br/><sha bytes="1000000" time="70ms" speed="14.260Mbyte/s"/><br/></info><br/> <br/>Optimized memcpy:<br/><info product="IP6010" mips="800Mips"><br/><memcpy bytes="1000000" time="1ms" speed="888.888Mbyte/s"/><br/><read bytes="1000000" time="2ms" speed="347.826Mbyte/s"/><br/><write bytes="1000000" time="2ms" speed="421.052Mbyte/s"/><br/><stack_memcpy bytes="1000000" time="7ms" speed="142.857Mbyte/s"/><br/><uncached_memcpy bytes="1000000" time="15ms" speed="64.000Mbyte/s"/><br/><aes bytes="1000000" time="138ms" speed="7.200Mbyte/s"/><br/><sha bytes="1000000" time="70ms" speed="14.285Mbyte/s"/><br/></info><br/><br/>CPU load with the test test/9.00/box/dsp/ip6010 shows approx 1% lower CPU load.<br/>Enet test test/9.00/box/enet/ip6010 shows 10638Kbyte/s transfer rate, compared to 9708Kbyte/s with the old memcpy.<br/><br/>With ECC enabled the CPU load was 19% / 21% without SRTP and 31% / 33% with SRTP<br/>With ECC Enet test test/9.00/box/enet/ip6010 shows 10638Kbyte/s transfer rate10309
''Status:''
ip6010.mak ip6000.mak arm.mak box/arm/memcpy.S<br/><br/>v8: ip6010.mak, box/box.mak, box/memcpy.S
   
== Incorrect rpcap timestamp after TRACE LOST messages ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=64915 64915]
|}
The RPCAP timestamp (Wireshark) after a TRACE LOST message was incorrect, as the TRACE LOST message contained an incorrect timestamp.
   
== VM, Project script didn't run for endpoints having "Send Number" configured ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=65456 65456]
|}
VM, Project script didn't run for endpoints having "Send Number" configured
   
== Kerberos: Do not allow registration of multiple databases for one realm name ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=65589 65589]
|}
This happened when a box hosted multiple PBXes with the same system name.<br/><br/>files: <br/>kerberos_if.cpp<br/>kerberos_kdc.h (v9 only)<br/>kerberos_kdc.cpp<br/>kerberos_db.cpp
   
== DECT: Trap during registration up handling ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=65698 65698]
|}
Trap in DECT Master fixed. It occurs if the master endpoint is in delete state and a RAS registration up event is received.
   
== MWI does not work in various Node/Pbx combination ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=65750 65750]
|}
MWI does not work in various Node/Pbx combination
   
== Trap: When Dectmaster registers user at PBX using SIP protocol ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=65798 65798]
|}
Occurred on IPBL[4.1.22]
   
== SIP: Fix for SDP answer to SDP offer with "a:inactive" ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=65863 65863]
|}
Interop with CUCM.<br/>Should return RTP/AVP(inactive) if offer was RTP/AVP(inactive).<br/>Not not RTP/SAVP(inactive).
   
== Message Waiting Interrogation: Result message coding wrong ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=65912 65912]
|}
a malformed message was displayed in wireshark
''Status:''
h450.cpp<br/>h450asn1.h
   
== SIP: Set CLIR if display string of From-URI contains "Anonymous" ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=65925 65925]
|}
Not only if userpart of From-URI contains "anonymous".
   
== ip6010 - same MAC address was assigned to ETH0 and ETH1 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=65939 65939]
|}
this results in problems when both interfaces are connected to the same LAN segment
   
== PBX-SOAP: Don't provide caller number if CLIR was used on call to monitored endpoint ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=65944 65944]
|}
If this was an internal call, the PBX knows the calling number anyway, but it should not be sent on SOAP
''Status:''
pbx_xml.cpp
   
== PBX-SOAP: UserDTMF did not send DTMF to Voicemail or Waiting Objects ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=65958 65958]
|}
It only sent DTMFs to a VOIP connection
''Status:''
pbx_xml.cpp
   
== Gateway SIP Interfaces: Could not configure internal registration for a disabled interface ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=65975 65975]
|}
and if a interface was disabled afterwards, the config for the internal registration was lost
''Status:''
gk.cpp
   
== SIP: Trap when receicing provisional response with RSeq header ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=65986 65986]
|}
Trap when trying to send PRACK
   
== ip6010 - frame loss on ethernet ports running in a VLAN ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=66028 66028]
|}
receiving of VLAN tagged frames did not work stable, when running ping -t over a longer time a frame loss from 5 to 10 percent was reported
   
== PBX Broadcast: CFNR was executed only after No Response Timeout even if no member ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=66032 66032]
|}
If there is no member in the broadcast group, a CFNR configured at the Broadcast object should be executet immediatelly.<br/><br/>This was a collateral damage from hotfix<br/><br/>65261: PBX Broadcast: CFB configured at broadcast was always executed if "Execute member diversions"
''Status:''
pbx_bc.cpp
   
== IP3010/6010: fax problems ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=66110 66110]
|}
* CED is not transfered <br/>* Wrong T38 encoding in V8
''Status:''
ac_dsp3.cpp ( AC491 doesnt want the V21/V22... relay bits set )<br/>config.h ( config.h, X missing, on V9 this parameter is not needed )
   
== PBX: Missing Group Indications when SIP phone is monitoring ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=66148 66148]
|}
If a SIP phone is monitored by another SIP phone,<br/>there are GI's missing if the monitored SIP phone is calling.
   
== DECT: Delete duplicate LDAP 'pbx' &lt;gw&gt; items ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=66174 66174]
|}
Now duplicate LDAP 'pbx' <gw> items are deleted by the DECT users module.
   
== PBX Trunk: Prefix was added to connected number even if no connected number present ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=66213 66213]
|}
The PBX then displayed just the Trunk prefix as remote number on the calls page when the call was connected.
''Status:''
pbx_trunk.cpp
   
== PBX-SOAP: FindUser should not show hidden objects ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=66216 66216]
|}
Could be confusing
''Status:''
pbx_xml.cpp
   
== IP6010-CF: Kingston compact flash was not recognized ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=66269 66269]
|}
the card was not recognized because a register was wrongly initialized.
   
== SIP: Bug in SDP handling ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=66274 66274]
|}
If value of the session id and version in the o line are zero.
   
== phone: Hexadecimal values instead of descriptive texts were displayed for some rare disconnect causes ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=66343 66343]
|}
"0x57 - unknow cause" was displayed instead of "user not a CUG member". Mainly german descriptive texts were missing.
   
== QSIG: Avaya expect Progress Indicator with external calls ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=66074 66074]
|}
Avaya uses the Progress indicator 'Interworking with a public network' to identify a call as external. This Progress Indicator is now added for calls from a Number NOT with private numbering plan (which is our way to identify internal calls)
''Status:''
q931.cpp
   
== ISDN: New interop flag to forward network provided or checked cli only ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=66183 66183]
|}
Useful if the real calling number is needed and not a number provided by CLIP no screening
''Status:''
q931.cpp<br/>q931.h<br/>isdn_interop.xsl
   
= V8 Hotfix18 (80500.57) =
Changes included in Version 8 hotfix18<!---->
[http://mantis.innovaphone.com/view.php?id=66417 Definition]
 
 
   
== SOAP, Send leg2Info.originalCalled Info ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=66422 66422]
|}
As CallInfo.No with type="leg2orig"
''Status:''
pbx_xml.cpp
   
== PBX CF Filter for external calls did not work as expected in case of chained CFs ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=66599 66599]
|}
A filter for external calls did not match if the external call was forwarded already by an internal user
''Status:''
pbx.cpp
   
== Gateway: Trap in case of collision of hold and clearing from remote ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=66642 66642]
|}
This could happen on gateways with analog interfaces if the R-Key was pressed right when the other side hung up
   
== H.323 potential trap if AlertingNumber is received ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=66710 66710]
|}
is no problem with existing equipment, because we don't know of any sending an AkertingNumber. Could become an problem if we do this sometimes in the future
   
== H.323 Coding error, when forwarding tunneled SDP in some cases ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=66727 66727]
|}
This could happen if during call setup a media negotiation happened on a call with a SIP and a H.323 leg.<br/><br/>This happened for example if a call was received from a SIP Trunk to a Quickdial object in the PBX. The outgoing call from Quickdial could fail because of this.
   
== Release not forwarded in quick dial object ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=66728 66728]
|}
If the called party released the call, the remote party didn't get the release.
   
== SIP: Always add payload type 13 (CN) to SDP ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=66735 66735]
|}
Config file option /add-cn-capability is obsolete and replaced by /rem-cn-capability now.
   
== possible noise in PRI connections with ip6010 ip3010 ip1060 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67302 67302]
|}
some few gateways may produce noise when using the PRI ports. This can be fixed with a new CPLD code contained in future firmware.
''Status:''
cpld.h
   
== X.509: Add key usage to certificate requests ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=66413 66413]
|}
The Microsoft CA (standard) does not write the key usage into the certificate if it is not specified in the request.
   
== DHCP-client  monitors ethernet link down/up events and revalidates current lease after link up ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67006 67006]
|}
This prevents problems when a device is hot plugged to another network.<br/>Further this helps to overcvome a problem with certain cable modems.   
   
= V8 Hotfix19 (80500.58) =
Changes included in Version 8 hotfix19<!---->
[http://mantis.innovaphone.com/view.php?id=67521 Definition]
 
 
   
== IPxx10: error handling in sata driver ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67229 67229]
|}
Old cards are producing DMA errors that were not handled properly. Try again read/write operation after error recovery.
   
== DECT: IP6000/IP6010/... default config Master mode off ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67479 67479]
|}
Now the Dect Master is in mode off by default for the IP6000/IP6010/...
   
== VM: Trap while processing self-forwarded call ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67570 67570]
|}
VM: Trap while processing self-forwarded call
   
== SIP: Uninitialized data in SDP offer/answer ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67617 67617]
|}
Applies to G.726 exclusive calls only.
   
== SIP: Interoperability with Lync and media-bypass ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67645 67645]
|}
Ack contained wrong To-Tag when calling a lync client in media-bypass scenario.<br/>Results into call drop after 30 seconds.
   
== PBX: Don't forward original diverting_leg2 info if divertion is executed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67686 67686]
|}
The leg2 information which is generated when executing an diversion already contains theoriginal called number from previous diversions, so the old leg2 info is not needed anymore. In fact it is harmfull if the call is received by an application only looking at the first leg2 info (e.g. Voxtron)
   
== PBX: License accounting in centralized licensing scenario wrong if master not available ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67698 67698]
|}
When the master is available the slave stores the licenses from the master including the usage. This stored usage included the licenses used by the slave itself, so if after a reset the master was not available the local usage just added to this.<br/><br/>Now from the stored usage the local usage is subtracted.
   
== PBX Trunk: Problem with Forking to trunk if multiple GWs are registered to Trunk ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67720 67720]
|}
If one of the gateways rejected the call (no channel, not connected, ...), the original call from which was forked was disconnected
   
== SIP: Fix for early media from Waitng Queue ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67775 67775]
|}
PROGRESS after ALERT was not handled by SIP stack.<br/>Now 183 Session Progress with SDP is send after 180 Ringing w/o SDP.
   
== H.323: A name_id of length 0 resulted in invalid H.450 coding ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67796 67796]
|}
An empty name identification received was forwarded in H.323 as invalid H.450. Such a name is now forwarded as 'name not available'.
   
== H.323 Malformed packet ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67803 67803]
|}
The ASN.1 encoder had a bug under one special condition: For a constrained character string with a maximum length of more or equal to 16bits, with an effective length of zero, the padding for octett alignment was missing for the zero length bitfield containing the string.<br/><br/>In H.323 this only happens for the CallIdentity used for H.450 call transfer message in case of blind transfer without consultation.<br/><br/>This fix breaks compatibility with earlier versions, for this reason this fix is available for version 9,8,7 and 6.<br/><br/>If phones and PBX with versions containing and not containing this fix are mixed  the following problems will occur:<br/>- A blind transfer without consultation (initiated with the redial key) is not possible<br/>- A call which was transfered without consultation is not displayed at the transfered-to phone as transfered<br/>
   
== SIP: Unwanted media-relay sessions when using forking/broadcast/multi-reg ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67819 67819]
|}
If in incoming SIP was routed to multiple destinations<br/>the final session could be media-relay although not configured.
   
== SIP: DNS problem when SRV response provides no additional records ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67907 67907]
|}
If 2-step resolving is required (SRV and A) the service port<br/>of the SRV response got lost and default SI Pport 5060 was used.
   
== SIP: Trap when configuring STUN server on a SIP/TCP or SIP/TLS interface ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67923 67923]
|}
STUN is for SIP/UDP only.
   
== PBX: Master/Slave compatibility problem with version 9 and version 8 and non-ascii characters in PBX name ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67956 67956]
|}
In version 8 only latin1 characters were allowed, which means in unicode the high byte was always 0. So it could be ignored and when sending location information between master and slave sometimes the high byte contained 0xff.<br/><br/>In version 9 this non-ascii location information was not correct unicode at all.<br/><br/>The problem happened only if non-ascii characters were used when naming a PBX.
   
== PBX: End of call intrusion was not signaled to the phone ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68007 68007]
|}
The call intrusion tone was generated even if the intrusion was terminated
   
== phone_inca:  "ETH0/Isolate PC Link" checkmark could not be cleared via WEB UI once set ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68098 68098]
|}
Only a WEB UI problem, a "config rem ETH0 /isolate-pc" did help.
   
== SIP: Interoperability with LinkSys SPA3102 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68174 68174]
|}
LinkSys SPA3102 gives "g729a" as RTP payload type mapping:<br/><br/>    v=0<br/>    o=- 510843041 510843041 IN IP4 192.168.10.20<br/>    s=-<br/>    c=IN IP4 192.168.10.20<br/>    t=0 0<br/>    m=audio 16404 RTP/AVP 18 100 101<br/>    a=rtpmap:18 G729a/8000<br/>    a=fmtp:18 annexb=no<br/>    ...<br/><br/>Needs to be handled.
   
== Gerneral/Admin page was broken if too many authentication servers were configured ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68231 68231]
|}
The number of authentication servers is now restricted to 10.
   
== phone: intrusion call started in handset mode is not terminated when going on hook when TAPI or operator run on PBX ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68249 68249]
|}
With TAPI or operator running on the PBX the the signaling of a busy condition is changed such that a disconnect instead of a release is sent. The disconnect was not handled correctly, the hookswitch state was lost and the next on-hook signal was ignored. TThus teh call could be terminated with the disc-key only.<br/>
   
== IP-DECT: Adding OEM radios to Kerberos realm did not work with passwords containing special characters ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68377 68377]
|}
The password was not URL-decoded when reading it from the UI.
   
== DTMF user configuration with invalid checkbox check for presence setting ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68383 68383]
|}
The check of the checkmark of the presence setting was wrong.
   
== X509: Fix for reading innovaphone info from flash ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68435 68435]
|}
Parsing the innovaphone info text was incorrect
   
== License: Be safe against factory reset during license invalidation ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68447 68447]
|}
If factory reset is done before license invalidation procedure is complete,<br/>will keep you from completing the license invalidation.<br/>Now the procedure can be completed even after factory reset.
   
== phone: DHSG headset not reset to idle after a hookswitch signal in idle state ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68567 68567]
|}
most DHSG headsets generate a hookswich signal and enter voice mode when taken out of basestation. This hookswitch signal was simply ignored.<br/>Now the voice mode is cleared after one second if there is no other DHSG event before.
   
== ip200a/230/240:  handset conversations can be monitored in a directly connected  headset ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=67666 67666]
|}
This feature is required for a special application and is supported only for ip200a/230/240 phones with a directly connected headset (non DHSG).<br/>It is enabled via<br/>  config add INCA_DSP /handset-spy <volume><br/>whith <volume> in the range from 1..8 
   
= V8 Hotfix20 (80500.59) =
Changes included in Version 8 hotfix20<!---->
[http://mantis.innovaphone.com/view.php?id=69989 Definition]
 
 
   
== Gateway: Allow configuration of username and password for ENUM/SIP interfaces ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68147 68147]
|}
For rare where remote destination server asks for authentication.<br/>(And all remote destination servers ask for same auth or remote destination server s always the same.)
   
== SIP/TCP: Transport error when connection is closed by client ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68578 68578]
|}
If transaction client closes connection before final response has been sent,<br/>the server tries to open a new connection toward ephemeral port of closed connection.
   
== SIP: Fix for Dialog-Info notification ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68581 68581]
|}
Send an empty dialig-info XML after inbound subscription.<br/>Required for interop with Grandstream GXP2010.
   
== SIP: Problem decoding INFO(application/dtmf-relay) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68667 68667]
|}
DTMF digit was not decoded from message body if whitespace between EQUAL and DIGIT.<br/>E.g. Signal= 5
   
== Phone: Changing config option /sip-hold does not call for reset ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68691 68691]
|}
Reset is required and 'reset required" must be displayed.
   
== Kerberos: Protect against ping pong attacks ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68822 68822]
|}
Do not answer with an error message to unexpected or malformed messages.<br/><br/>This protects against the "Kerberos Server Spoofed Packet Amplification DoS" attack. The attack causes two Kerberos servers to send each other error messages in a ping pong style.
   
== Potential Trap because of recursive loop, if "incomplete" deastination used at a Node to invalid name/number ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68862 68862]
|}
Check for loop implemented (merge from v10, v9)
   
== H.450: Bad encoding of DivertingLegInformation4 arguments ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=68868 68868]
|}
DivertingLegInformation4 content coding was wrong.<br/>Wireshark displayed it as malformed.<br/><br/>Note:<br/>This fix causes interoperability problem with phones with older (non-fixed) firmware versions!<br/>Phones also require an updated firmware if PBX is updated.
   
== PBX: Phone config was not sent to phone, if phone was power cycled shorty after registration ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69280 69280]
|}
The new registration after the power cycle was not detected as new registration but as re-transmission of the previous registration, so it was not reported to the PBX and no phone config was sent
   
== SIP: NOTIFY sent after 302 moved temporarily ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69282 69282]
|}
After processing "302 moved temporarily" on an outbound call a NOTIFY (sipfrag) was sent.
   
== IP-DECT: New radio BMC firmware PCS05Ak ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69468 69468]
|}
The new radio BMC firmware PCS05Ak for the IP1200 fixes a trap by the DECT system if more than 255 DECT users without an endpoint subscription are sent to it.
   
== PBX: Reject calls without media, if no known facility ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69477 69477]
|}
Fixes compatibility issues between versions. For example presence subscription sessions from v8 phones being forwarded to voicemail
   
== PBX: Filter for internal or external calls at CFs did not work CFB or CFNR if call already diverted ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69483 69483]
|}
Problem:<br/><br/>User A has CFU to User B<br/>User B has CFNR for ext. Calls only to User C<br/><br/>An internal call to A was diverted to B (ok) and after no response diverted to C (nok)
   
== PBX Waiting: No ringback when doing two-stage dialing to a Gateway/Trunk object ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69531 69531]
|}
A local ringback is now switched on, when receiving ALERT from called party
   
== phone: assume an outbound call to be an external call if connected number info is missing in connect event ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69581 69581]
|}
In certain ISDN configurations the PBX can not provide the connected number info in the connect event for an outbound call. In this case the the call was assumed to be an internal call and consequently was not recorded when transparent recording of external calls was configured.<br/>Now an external call is assumed in this case.<br/> <br/>
   
== phone: VLAN signaling priority could not be configured via phone menu ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69633 69633]
|}
Under "Menu/Administration/IP Settings/VLAN" there was only a "VLAN Priority" menu item. This menu item did override the 'Priority RTP Data' value but not the 'Priority Signaling' value as entered via WEB configuration.<br/>Now the items "Prio. RTP Data" and "Prio. Signaling" replace the "VLAN Priority" item.
   
== IPxx10-sata: trap after config /trace /track activation ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69642 69642]
|}
Instruccion was accessing uninitialized pointer.
   
== IP6010: RSTP did not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69731 69731]
|}
When connecting ETH0 in RSTP mode to an HP Pro Curve switch the switch changed the port state to blocked after negotiation phase
''Status:''
files: mv78x00_drv.cpp, mv78x00_drv.h
   
== SIP: Trap when handling NOTIFY(application/qsig) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69771 69771]
|}
Traps if no progress indicator present in tunneled DISCONNECT message.
   
== IP6010: SRTP using AES-192 and AES-256 did not work ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69828 69828]
|}
Due to a bug in the encryption driver of the IP6010, only AES-128 worked on this platform.
   
== ISDN interop issue with SecuGATE LI 30 from Sirrix ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69168 69168]
|}
The SecuGATE LI30 is sending/receiving ISDN INFO messages in Call Proceeding State (State 3 and state 9), which was not supported
   
== Allow multiple HTTP IP address filters (allowed stations) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69645 69645]
|}
synced from V9
''Status:''
http.cpp<br/>http.h<br/>http.xsl
   
= V8 Hotfix21 (80500.60) =
Changes included in Version 8 hotfix21<!---->
[http://mantis.innovaphone.com/view.php?id=69991 Definition]
 
 
   
== VM, email attachments weren't sent for https URLs ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=69965 69965]
|}
i.e. voicemail wave attachments
   
== SIP: Reject unsupported method types with "SIP/2.0 405 Method Not Allowed" ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70526 70526]
|}
Not ignoring them.<br/><br/>PING sip:tel3@PBX0 SIP/2.0<br/>Via: SIP/2.0/UDP 172.16.77.14:5060;branch=z9hG4bK937906956;rport<br/>From: ;tag=3520474<br/>To: <sip:tel3@PBX0><br/>Call-ID: 193626070<br/>CSeq: 20 PING<br/>Contact: <sip:tel3@172.16.77.14><br/>Max-Forwards: 70<br/>Content-Length: 0<br/><br/>SIP/2.0 405 Method Not Allowed<br/>Via: SIP/2.0/UDP 172.16.77.14:5060;branch=z9hG4bK937906956;rport<br/>From: <sip:tel3@PBX0>;tag=3520474<br/>To: <sip:tel3@PBX0><br/>Call-ID: 193626070<br/>CSeq: 20 PING<br/>Allow: REGISTER,SUBSCRIBE,NOTIFY,INVITE,ACK,PRACK,OPTIONS,BYE,CANCEL,REFER,INFO,UPDATE,PUBLISH<br/>Content-Length: 0<br/><br/>
   
== Trap: When Dectmaster registers user at PBX using SIP protocol ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70675 70675]
|}
After closing regstration Dectmaster starts another call.<br/>Call is rejected, but signaling enity is deleted before call object.
   
== SIP: No route processing if neither Record-Route header nor Contact header is present ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70971 70971]
|}
Misleading trace message:<br/>  sip_call::process_routing(0xA8) Unsupported transport protocol: sip:user@domain.com;user=phone
   
== when editing a phone config template the dialing location inherited from a predecessor template was stored in the edited templat ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71246 71246]
|}
after a template has been edited unchanged information units inherited from predecessor templates must be removed from the edited template. this did not work for the dialing location and thus a later change in a predecessor template had no effect.
   
== SIP: No media after accepting a waiting call ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71288 71288]
|}
Call waiting on a phone.<br/>Going onhock while another call is waiting starts ringer.<br/>After going offhook again the waiting call is accepted, but no media in both directions.
   
== phone: send config to PBX only when the config was edited on phone ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71387 71387]
|}
A config from an older PBX may contain duplicate elements which are stripped by the phone. I such a stripped config is sent back to the PBX the PBX will return the old config again.
   
== SIP: Interop with Nortel CS1000 SIPLine GW ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71426 71426]
|}
Nortel sends 183/Progress with 'sendrecv' answer<br/>followed by UPDATE with 'inactive' offer<br/>followed by UPDATE with 'sendrecv' offer.<br/><br/>Innovaphone SIP stack remains in 'inactive' state.
   
== SIP: Interoperability with MX-ONE ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71480 71480]
|}
A semi-attended transfer fails if MX-ONE sends INVITE(Replaces)<br/>instead of 200/OK when connecting a call.
   
== SIP: Trap on timer expiration during call release ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71699 71699]
|}
Media negotiation watchdog timer expired after final SIG_REL went to app.<br/>But before app deleted the call object.
   
== phone: display info provided by SETUP or CONNECT was ignored ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71727 71727]
|}
only the display info provided by an INFO event was handled 
   
== Gateway: Forward Display Info received from ISDN Setup to H.323 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=70562 70562]
|}
needed for compatibility with SecuGATE LI30
   
== phone: LED mode of Join Group function key can be set both for idle and for active state ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71247 71247]
|}
sometimes the "not in group" state must be signaled as the exception
   
== phone: Mic Off/On controllable via Soap:UserRc(&lt;call&gt;,14/15) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71721 71721]
|}
To allow Soap app's control of the mute key
   
= V8 Hotfix22 (80500.61) =
Changes included in Version 8 hotfix22<!---->
[http://mantis.innovaphone.com/view.php?id=71744 Definition]
 
 
   
== TCP: Roundtrip measurement wrong in case of packet loss ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71985 71985]
|}
In case of packet loss, way to high round trip values were measured. If the packet-loss was to high, this could result in a constantly increasing re-transmission timeout value.
   
== SIP: Trap on IP-DECT when re-configuring PBX link ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72190 72190]
|}
85:2195:425:7 - REG_PRI.4 default(8102be48): serial_timeout<br/>85:2195:425:7 - Assertion failed line 748 in common/os/os.cpp, object deleted<br/>
''Status:''
Merged to 09-80500
   
== Scheduling improved to avoid processes not being scheduled during long flashman operations ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72243 72243]
|}
In version 7 it could happen, that IP and other processes were not scheduled any more during periods of long flashman operations (e.g. bootcode update or reorganizing flash).<br/><br/>In version 8 and higher there was already a fix for this problem, but this included special handling of the flashman priority level, which was not a good solution even if it worked.
   
== SIP: Cleanup failed (resources leaking) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72284 72284]
|}
Call and channel objects were not freed sometimes<br/>when INVITE was followed by CANCEL very fast.
   
== PBX SOAP: Called Number presentation not correct for calls to 'local' objects ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72396 72396]
|}
If an object is marked as local, the PBX prefix should not be included in the called number.<br/><br/>This is a fix, which is merged from v9 and higher back into v8
   
== update - scfg command could hang when the HTTP session was broken or prematurely closed by the server ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72708 72708]
|}
in consequence update script processing was stopped until reboot
   
== Trap: When Dectmaster registers user at PBX using SIP protocol ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72729 72729]
|}
When Dectmaster registers user at PBX using SIP protocol
   
== PBX: Called Name displayed when calling an object with forking was wrong ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72735 72735]
|}
The name of the forking destination was displayed instead of the name of the called object
   
== PBX: No Audio if call thru Waiting Queue DTMF destination, was transfered to BC-Conf ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72746 72746]
|}
Problem caused by call state management error in PBX for calls connected without alert if alert was received later
   
== SIP: Memory leak during transfer ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73003 73003]
|}
Occured on internal testing only (002-conf-with-bcast.xml)
   
== Debug information on assertion ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71961 71961]
|}
More debug information on default event handler.
   
== SIP: Get display information from Call-Info header in register response ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=72448 72448]
|}
Get display information from Call-Info header in 200/OK
   
== PBX: Forward original received ISDN display element to picking up or forwarded call ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=73278 73278]
|}
In the display element from ISDN there could be vital information from equipment like crypto gateways. This should be available also if the call was picked or forwarded.
   
= V8 Hotfix25 (80500.65) =
Changes included in Version 8 hotfix25<!---->
[http://mantis.innovaphone.com/view.php?id=78245 Definition]
 
 
   
== IP6010: Wrong timer under high load ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71001 71001]
|}
-Clear IRQ in handle-interrupt after os_interrupt is too late, since IRQïs a enabled again and e.g. the timer irq is called again if a lower level IRQ like the enet occurs.<br/>-The IRQ needs to be cleared in the serial-irq handler, in all case. After the serial-irq other interrupts are enabled.<br/>
''Status:''
ip6010.cpp<br/>ip6010.h
   
== ip6010/3010/1060: Ethernet transmit packet length is sometimes wrong ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=77774 77774]
|}
Sometimes old content of the tx dma descriptor was used by the ethernet MAC.<br/>Now the memory write buffers are drained before enabling the tx dma.
''Status:''
mv78x00_drv.cpp<br/>mmu.S
   
== ip6010/3010/1060: Ethernet receive packet sometimes delayed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=77781 77781]
|}
Sometimes the rx descriptor are processed with the next tx event.<br/>Now the rx queue is processed completely in on interrupt.<br/>
''Status:''
mv78x00_drv.cpp<br/>mv78x00_drv.h
   
== Gateway: Trap when interworking Call Completion ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78228 78228]
|}
Trap when interworking Call Completion.<br/><br/>LOG CALL 6 A:Call    ->                        / PRI2::->*::<br/>R_CALL free error c18a59b8<br/>
   
== TLS flow control damaged in versions 7 and 8 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78377 78377]
|}
The following fix was not good:<br/>#75004: TLS: Flow control for incoming data<br/><br/>Therefore TLS did not work correctly in the following releases:<br/>v7hotfix35 and v7hotfix36<br/>v8hotfix23 and v8hotfix24<br/><br/>No problem in version 9.<br/>
   
== SIP: Be save against sudden death of SIP caller ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78460 78460]
|}
Lifetime of an INVITE trasnaction is not limited by any timeout<br/>after provisional response has been send/received.<br/>Sudden death of a caller make calls hang forever.<br/>Now overall lifetime of an INVITE server transaction is limited to 3 minutes.<br/>After expiration fimnal reject response is sent and call is released.
   
== IP6000: Traps in DSP driver under high load ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78591 78591]
|}
under high load timing may change. Checks in driver relaxed to take this into account.
   
== SIP: Wrong number of waiting messages (MWI) ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=78890 78890]
|}
MWI: Number of voice messages not decoded from incoming NOTIFY(application/simple-message-summary).<br/>Was either 1 or 0.
   
== IP6010/3010/1060/0010: RSTP not working ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79251 79251]
|}
RSTP packets were sent to but not received from switch port
''Status:''
checked in to 8.00,09-80500
   
== HTTP-Client: MD5-sess authentication ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=77773 77773]
|}
HTTP Digest Authentication with alogrithm=MD5-sess.<br/>Choose the first supported "WWW-Authenticate" line from 401 response headers.<br/><br/>Needed for new versions of IIS.<br/><br/>
''Status:''
http://wiki.innovaphone.com/index.php?title=Support:DVL-Feature_Requests#HTTP_Client
   
= V8 Hotfix26 (8079900) =
Changes included in Version 8 hotfix26<!---->
[http://mantis.innovaphone.com/view.php?id=79737 Definition]
 
 
   
== IP1060 IP3010 IP6000 IP6010: DSP packet debug didnt show some packets, version endian ,and dsp-trace port was wrong ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=79754 79754]
|}
cleanup
''Status:''
ac_491.cpp<br/>debug.h<br/>ac_dsp3.cpp<br/>trace.xsl<br/>
   
== PBX Waiting: Missing ringback on call forward after announcement ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87674 87674]
|}
This was a collateral damage of<br/><br/>fix: #81370: PBX Waiting: Call state shows "Disconnecting" after switch from announcement 1 to announcement 2<br/><!--<br/>pbx_wait.cpp<br/>-->
   
== PBX Waiting: DTMF overlap dialing or blind transfer to same Waiting object was rejected with busy ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=87681 87681]
|}
Even if this was caused by a CFB or CFU on the dialed destination<br/><!--<br/>pbx_wait.cpp<br/>-->
   
== Phones: Switch for phoneapp to disable auto-answer ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=80233 80233]
|}
Disable/enable auto-answer support on phoneapp level.<br/><br/><!--<br/>phonesig_if.h<br/>phonesig.cpp<br/>-->
   
= V8 Hotfix 28 (80804) =
Changes included in Version 8 hotfix28<!---->
[http://mantis.innovaphone.com/view.php?id=82179 Definition]
 
 
   
== HTTP-Server: Configuration of "Public compact flash access" did not work for all cases ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82064 82064]
|}
E.g. /DRIVE/CF0/Neuer Ordner/ does not work, because HTTP request contains escaped sequences.<br/><br/><!--<br/>http.cpp<br/>-->
   
== Gateway CDR with '0. 0' charge amount ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82359 82359]
|}
Should be '0.00' instead<br/><!--<br/>fty.cpp<br/>-->
   
== H.323:No Media for calls with reverse media to a H.323/SIP exclusive Code Media Relay interface ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82408 82408]
|}
The execlusive coder/media relay config is used to avoid media negotiation problems with carrier which do not support media renegotiations. In case of a call with reverse media to such an interface, this did not work. This happens for example if a CFNR is configured at a Waiting Queue which redirects a call, which received an announcement from the Queue to such interface.<br/><!--<br/>h323ch.cpp<br/>-->
   
== Debug "HTTP_GET LOG_HTTP.1: retry, authentication failed" removed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82499 82499]
|}
<!-- httpclient_i.cpp -->
   
== SIP: Trap during call handling ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82544 82544]
|}
Trap during call handling<br/><br/><!--<br/>sip.cpp<br/>-->
   
== SIP: SRTP key exchange failed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82616 82616]
|}
Bug in base64 decoding of SRTP key.<br/><br/><!--<br/>sdp.cpp<br/>-->
   
== Debug information on assertion ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=81973 81973]
|}
More debug information on default event handler.
   
= V8 Hotfix 29 (80807) =
Changes included in Version 8 hotfix29<!---->
[http://mantis.innovaphone.com/view.php?id=83649 Definition]
 
 
   
== failure of analog ports of ip28 ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=82488 82488]
|}
ip28 analogue ports do not react to incoming calls and hook-off. Problem could only be solved by reset.
   
== phone: when scrolling directory search results sometimes one of  the numbers of a contact was not displayed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84362 84362]
|}
the tag characters assigned to the different numbers were not included in sort order.
   
== SIP: Trap during channel handling ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=84800 84800]
|}
Rare trap when re-assigning channels.<br/><br/><!--<br/>sip.cpp/h<br/>medialib.h<br/>-->
   
= V8 Hotfix 30 (80811) =
Changes included in Version 8 hotfix30<!---->
[http://mantis.innovaphone.com/view.php?id=85034 Definition]
 
 
   
== AD Replication: Configuration Buffer Increased ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86211 86211]
|}
Was too small for many maps<br/><!--<br/>ldaprep.cpp/.h<br/>-->
   
= V8 Hotfix 31 (80815 ) =
Changes included in Version 8 hotfix31<!---->
[http://mantis.innovaphone.com/view.php?id=86427 Definition]
 
 
   
== Gateway: #11 could not be dialed on analog interfaces with feature codes enabled ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86819 86819]
|}
This is a featiure code used on DECT systems and it was not disabled on analog interfaces<br/><!--<br/>relayfty.cpp<br/>dtmffty.cpp<br/>-->
   
== PBX: Trap if a Hold was attempted for a call without media ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=86874 86874]
|}
Could be caused by a misbehaving application or voip device<br/><!--<br/>pbx.cpp<br/>-->
   
== (clone of #80623) SIP: Calls may remain in clearing state ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=88134 88134]
|}
SIP calls may remains undeleted.<br/><br/><!--<br/>sip.cpp<br/>-->
   
= V8 Hotfix32 (80816.00) =
Changes included in Version 8 hotfix32<!---->
[http://mantis.innovaphone.com/view.php?id=89003 Definition]
 
 
   
== PBX: Potential trap when receiving unknown presence activity ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=98043 98043]
|}
In the respective version unknown activities are mapped to "busy"<br/><!--<br/>fty.cpp - rollback of this change<br/>h450.cpp<br/>-->
   
= V8 Hotfix33 (80819.00) =
Changes included in Version 8 hotfix33<!---->
[http://mantis.innovaphone.com/view.php?id=98530 Definition]
 
 
   
== SIP: Wrong encoding of proprietary response header ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=98235 98235]
|}
200/OK for REGISTER delivers endpoint's alias list.<br/>Encoded in proprietary response header "P-Alias".<br/>Encoding specifier was wrong.<br/><br/>Was:<br/>  P-Alias: 2,17,uranus%2Ck%FCmmel<br/>Must be:<br/>  P-Alias: 1,17,uranus%2Ck%FCmmel<br/><br/><!--<br/>sipmsg.cpp<br/>-->
   
== SIP: SDP version not increased when answering an offer where only media-mode has changed ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=98739 98739]
|}
If remote side changes from 'sendrecv' to 'inactive'<br/>the SDP answer follows this change of media-mode,<br/>but SDP version was not increased.<br/><br/><!--<br/>sip.cpp<br/>-->
   
== SIP: Do not add payload type 13 to media description for fax ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=98757 98757]
|}
Add payload type 13 only to media description for audio<br/><br/><!--<br/>sdpmsg.cpp<br/>-->
   
= V8 Hotfix34 (80820) =
Changes included in Version 8 hotfix34<!---->
[http://mantis.innovaphone.com/view.php?id=99849 Definition]
 
 
   
== I6000 IP2000 Allow changing SRTP key while data is queued for encryption ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=100549 100549]
|}
Bug in the crypto crypto driver. When the SRTP key is changed while a packet is being encrypted the SRTP socket hung up.<br/><br/><!--<br/>srtp_cipher.cpp<br/>-->
   
== NTP-Server: use destination address  from client request as source address in response to client ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=100940 100940]
|}
a response to a client request received via ETH1 was sent with the ETH0 address as source address when routed through default gateway on ETH0.<br/>a response with a source address not matching the adressed server is discarded on client side.<br/><br/><!-- ntp.cpp -->
   
= V8 Hotfix35 (80821) =
Changes included in Version 8 hotfix35<!---->
[http://mantis.innovaphone.com/view.php?id=101109 Definition]
 
 
   
== PBX: Boot-Loop when replicating objects with wrong password ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=101879 101879]
|}
When a replication was configured, replicating all objects from a different PBX, with different PBX password then configured already on the box, the box entered a boot loop, which only could be stopped with a long reset.<br/><!--<br/>pbx.cpp<br/>-->
   
= V8 Hotfix36 (80822) =
Changes included in Version 8 hotfix36<!---->
[http://mantis.innovaphone.com/view.php?id=108153 Definition]
 
 
   
== IP230/IP240: Sporadic traps during manufacturing programming ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=71778 71778]
|}
Inefficient loop during mac address programming
''Status:''
flash_firmware.cpp<br/>
   
= V8 Hotfix37 (80857) =
Changes included in Version 8 hotfix37<!---->
[http://mantis.innovaphone.com/view.php?id=112703 Definition]
 
 
   
== Phones: Only one diverting party displayed on incoming calls ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=74406 74406]
|}
Only original called party displayed, not the last diverting party.<br/>Phones with non-color display only (IP240,IP230,IP200,IP11,IP150)<br/><br/>
   
== phone: In Recording Mode 'transparent' or'optional' a 2nd call started by a dialing application could terminate the 1st call ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=114789 114789]
|}
This happened when a 2nd call was started by a dialing application and then terminated again while the call was in alerting state.<br/><br/><!-- phonesig.cpp --><br/>
   
= V8 Hotfix38 (80866) =
Changes included in Version 8 hotfix38<!---->
[http://mantis.innovaphone.com/view.php?id=114341 Definition]
 
 
   
== phone: In Recording Mode 'transparent' or'optional' internal calls were recorded although 'External Calls Only' was checked ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=114516 114516]
|}
happened only to outbound calls initiated by some dialing application.<br/>outbound calls initiated directly at the phone and inbound calls were recorded correctly.<br/><br/><!-- app_call.cpp -->
   
= V8 Hotfix39 (80868) =
Changes included in Version 8 hotfix39<!---->
[http://mantis.innovaphone.com/view.php?id=116261 Definition]
 
 
   
== Kerberos: Admin UI trap when having too many Kerberos hosts ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=116957 116957]
|}
The problem occured if many Kerberos hosts (~1000) were registered on the server. In this case the box trapped due to an XML encoding problem when opening the page General/Kerberos or PBX/Config/Security.<br/><br/>Was already fixed in v10 and v9hotfix18.<br/><!--<br/>kerberos_db.cpp<br/>kerberos_ldap.cpp<br/>-->
   
= V8 Hotfix40 (80869) =
Changes included in Version 8 hotfix40<!---->
[http://mantis.innovaphone.com/view.php?id=118390 Definition]
 
 
   
== FXS: Trap on very rare race collision of retrieve with call release ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=122980 122980]
|}
If a retrieve happens at the same time as a call release of the held call, a trap could happen. The propabilty of this to happen was very low.<br/><!--<br/>relay.cpp<br/>-->
   
= V8 Hotfix41 (80871) =
Changes included in Version 8 hotfix41<!---->
[http://mantis.innovaphone.com/view.php?id=124737 Definition]
 
 
   
== wrong activation of non-existent spread-spectrum clock ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=108014 108014]
|}
happens for all non-ip28 (ip22/24/302/305) gateways if hardware build >= 402, causes the gateways to stall due lack of clocking<br/><!--<br/>ip24.cpp<br/>-->
   
= V8 Hotfix42 (80872) =
Changes included in Version 8 hotfix42 (80872)<!---->
[http://mantis.innovaphone.com/view.php?id=133799 Definition]
 
 
   
== Incomplete HTTP responses from HTTP server in certain circumstances ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=138895 138895]
|}
It might have happened, that the HTTP server closed the underlying TCP connection before all data could be sent.<br/><br/><!--<br/>http.cpp<br/>-->
   
== SIP: Switch from Media-Relay to No-Media-Relay when handling INVITE with Replaces ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=139046 139046]
|}
Switch from Media-Relay to No-Media-Relay when handling INVITE with Replaces.<br/>May result into no media after INVITE with Replaces.<br/><br/><!--relay.cpp-->
   
== IP-DECT: Master trap ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=143206 143206]
|}
There is a Master trap because of an uninitialized variable within a facility call. This is fixed now.
   
= V8 Hotfix43 (81020) =
Changes included in Version 8 hotfix43<!---->
[http://mantis.innovaphone.com/view.php?id=150952 Definition]
 
 
   
== SHA-2 hash algorithms ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=113239 113239]
|}
Port the hash algorithm to our platform.<br/><br/><!--<br/>sha256.c<br/>sha512.c<br/>sha.h<br/>md32_common.h<br/>opensrc.mak<br/><br/>test_tls.h<br/>test_tls.cpp<br/><br/>11.00/unit-tests/tls/encryption<br/>--><br/>
   
== Support for SHA2 certificates ==
 
{|
|Status
|<font><font color="green">Closed</font></font>
|-
|Id
|[http://mantis.innovaphone.com/view.php?id=113352 113352]
|}
* encoding and decoding<br/>* verification<br/>* create such certificates on boxes (except sha224)<br/><br/>Signature algorithms:<br/>* sha224WithRSAEncryption { pkcs-1 14 }<br/>* sha256WithRSAEncryption { pkcs-1 11 }<br/>* sha384WithRSAEncryption { pkcs-1 12 }<br/>* sha512WithRSAEncryption { pkcs-1 13 }<br/><br/><!--<br/>common/protocol/tls/x509.cpp<br/>common/protocol/tls/x509.h<br/>common/protocol/tls/certificate_create.xsl<br/>common/protocol/tls/certificate.xsl<br/>common/protocol/tls/request.xsl<br/>common/lib/rsa.cpp<br/>common/lib/rsa.h<br/>common/ciphers/cipher_api.cpp<br/>common/interface/cipher_api.h<br/>common/interface/oids_asn1.h<br/>-->
   
= V8 Hotfix44 =
Changes included in Version 8 hotfix44<!---->
[http://mantis.innovaphone.com/view.php?id=165494 Definition]

Revision as of 17:01, 4 April 2016

This is the Firmware V8 Roadmap Document.

The release date of the next Hotfix is planed for the second monday of a month. Please note that this a scheduled and no fix date.

This article is generated automatically. Do not edit! Please see the disclaimer before using the information presented here!


SQLSTATE[HY000] [2002] Es konnte keine Verbindung hergestellt werden, da der Zielcomputer die Verbindung verweigerte. 1

Retrieved from "https://wiki.innovaphone.com/index.php?title=Reference8:Release_Notes_Firmware&oldid=41019"