Reference9:3pty conference on DECT phones
This article explains how to configure and use 3pty conference calls on DECT phones.
Applies To
This information applies to
- all innovaphone DECT devices from V9.
More Information
The innovaphone IP-DECT devices are able to use the innovaphone conference hardware (CONF interface) to establish a 3pty conference call with firmware V9 hotfix 11 or later. If the 3pty conference is started by the user, first the IP-DECT device starts a call to the configured conferencing unit number. If this call connects, the connected number is used to connect the other call parties to the conference call.
Requirements
- innovaphone IP-DECT device with firmware V9 hotfix 11 or later
- innovaphone device with CONF interface
Configuration
- PBX: The innovaphone CONF interface is registered to a PBX Trunk Line object. The Trunk Line must have a number and be called by the gatekeeper the DECT users are registered.
- IP-DECT device: The Conferencing Unit Number of the DECT Master is to be set to the Trunk Line number appended by *1#.
Usage
To start a conference by a DECT phone use the R-key feature R+3 during a call. You must have at least one inactive call. To stop the conference again use also R+3. R+2 stops the conference and toggles to the last inactive party, or to a waiting call, if present.
Related Articles
V9 Hotfix11: IP-DECT: Three party conference with innovaphone PBX