Reference:Administration/Diagnostics/CF: Difference between revisions

Latest revision as of 12:02, 9 March 2011

Depending on device, this menu shows you whether a CF card is being used. Please note that the devices support the FAT32 format only. To be able to use the CF card properly, it must be formatted accordingly beforehand. The card can only be formatted if it is first unmounted' using the umount or remove button.

 Note
 The card is only really unmounted if no folders or files are being accessed any more.
 If, for example, voicemail that is on the CF card is accessed, 
 then the block and the subsequent formatting only take effect when the voicemail is no longer being accessed.

To transfer files to the CF card, the card must be connected as a network drive. This is only possible in a mounted state. Should the CF card be unmounted, it must be mounted using the mount button.

 Note
 To be able to connect the CF card as a network drive, the following path must be used:
 "\\<IP address of the gateway>\DRIVE\CF0".
 User and password correspond to the user and password as configured in chapter "Configuration/General/Admin".

The following buttons are available:

Info

Shows some usefull infos, e.g. the available free space.

Mount/Umount

Mounts/unmounts the CF card. If the card is not mounted, it cannot be accessed. It can however be formatted or a checkdisk can be run. If there are open files or folders, the card won't be unmounted and the files/directories will be listed, so that the administrator can decide if an unmount with 'Remove' is secure.

Remove

Also unmounts the CF card if files or directories are currently opened. Necessary operations will be finished, so that there will be no data inconsistency, but e.g. log files will be closed.

Chkdisk

Checks the CF card for errors.

Format

Formats the CF card in the FAT32 format.

Browse CF Content

Allows you to browse through the CF card's content. Please note that the flash file system implementation will always show file creation timestamps rather than file modification timestamps (neither modification time stamps nor the archive bit are maintained for speed).

@@ Line 1: / Line 1: @@
-   <font color="red">'''Achtung'''
+__NOTOC__
-   Englische übersetzung folgt!</font>
+Depending on device, this menu shows you whether a '''CF''' card is being used. Please note that the devices support the '''FAT32''' format only. To be able to use the CF card properly, it must be formatted accordingly beforehand. The card can only be formatted if it is first ''unmounted' using the umount or remove button.
+   '''Note'''
+   The card is only really unmounted if no folders or files are being accessed any more.
+  If, for example, voicemail that is on the CF card is accessed,
+  then the block and the subsequent formatting only take effect when the voicemail is no longer being accessed.
-Je nach Gerät ist über dieses Menü ersichtlich, ob eine '''CF'''-Karte verwendet wird. Dabei ist zu beachten, dass die Geräte ausschliesslich das ''FAT32''-Format unterstützen. Um die CF-Karte ordnungsgemäß verwenden zu können, muss diese entsprechend zuvor formatiert werden. Die Karte lässt sich nur dann formatieren, wenn sie über den Button ''lock'' gesperrt wurde.
+To transfer files to the CF card, the card must be connected as a network drive. This is only possible in a ''mounted'' state. Should the CF card be unmounted, it must be mounted using the mount button.
-  '''Hinweis'''
-  Die Karte ist erst dann wirklich gesperrt, wenn auf keine Ordner oder Dateien mehr zugefriffen wird.
-  D.h.: sollte zum Beispiel auf die CF-Karte befindliche Voicemail zugefriffen werden,
-  so greift die Sperre und die anschliessende formatierung erst dann, wenn auf die Voicemail nicht mehr zugefriffen wird.
-Um Dateien auf die CF-Karte zu übertragen, muss die Karte als Netzlaufwerk verbunden werden. Dies ist nur in einem nicht gesperrten Zustand möglich. Sollte die CF-Karte gesperrt sein, so muss sie über den Button ''unlock'' entsperrt werden.
+  '''Note'''
+  To be able to connect the CF card as a network drive, the following path must be used:
+  "''\\<IP address of the gateway>\DRIVE\CF0''".
+  User and password correspond to the user and password as configured in chapter "[[Reference:Configuration/General/Admin|Configuration/General/Admin]]".
-  '''Hinweis'''
+The following buttons are available:
-  Um die CF-Karte als Netzlaufwerk verbinden zu können, m uss folgender Pfad verwendet werden:
+== Info ==
-  "''\\<IP-Adresse des Gateways>\DRIVE\CF0''".
+Shows some usefull infos, e.g. the available free space.
-  Benutzer und Passwort entsprechen dem Benutzer und Passwortwie im Kapitel: "[[Reference:Configuration/General/Admin|Configuration/General/Admin]]" konfiguriert.
-Folgende Buttons sind verfügbar:
+== Mount/Umount ==
-== Lock/Unlock ==
+Mounts/unmounts the CF card. If the card is not mounted, it cannot be accessed. It can however be formatted or a checkdisk can be run. If there are open files or folders, the card won't be unmounted and the files/directories will be listed, so that the administrator can decide if an unmount with 'Remove' is secure.
-Sperrt, entsperrt die CF-Karte. Im gesperrten Zustand kann auf die Karte nicht zugegriffen werden.
+== Remove ==
+Also unmounts the CF card if files or directories are currently opened. Necessary operations will be finished, so that there will be no data inconsistency, but e.g. log files will be closed.
 == Chkdisk ==
-Überprüft die CF-Karte auf Fehler.
+Checks the CF card for errors.
 == Format ==
-Formatiert die CF-Karte im FAT32-Format.
+Formats the CF card in the FAT32 format.
+== Browse CF Content ==
+Allows you to browse through the CF card's content.  Please note that the flash file system implementation will always show ''file creation timestamps'' rather than ''file modification timestamps'' (neither modification time stamps nor the archive bit are maintained for speed).
+<!-- Keywords: flashcard cf-card flash card compact flash -->