Reference:Configuration/DECT/Master
Jump to navigation
Jump to search
There are also other versions of this article available:
Reference (this version) | Reference8 | Reference9 | Reference11r1
It is necessary to configure the operating mode of the DECT system. A gatekeeper must also be specified here, on which the innovaphone PBX component is operated.
- Mode: Active switches on the DECT master function. In every DECT system, there must be a DECT master.
- Standby switches on the standby function for the DECT master.
- Off switches off the DECT master function.
- GK: The IP address of the primary gatekeeper. The device on which the innovaphone PBX component is operated.
- Alt GK: The IP address of the secondary, alternative gatekeeper.
- GK ID: The gatekeeper ID of the gatekeeper to be used.
- Prot: The protocol to be used for the communication. There is a choice between:
- H.323 (RFC 1889), which is the recommended protocol for innovaphone VoIP devices, since it implements most features.
- SIP (RFC 3261).
- STUN Server: STUN server to be used if DECT master has no public ip address and SIP server is outside the local network.
- Name for Authentication: Some SIP PBXs need authentication name different from the registration id. This enables the number being used as id and the name for authentication.