Template:SIP Profile Test T38 PSTN yes MR Ex: Difference between revisions

From innovaphone wiki
Jump to navigation Jump to search
(New page: Additionally transport of faxes to/from the PSTN using the T.38 protocol was tested successfully. However since the provider requires the MediaRelay and Exclusive-Coder setting, T.38 is n...)
 
No edit summary
 
Line 1: Line 1:
Additionally transport of faxes to/from the PSTN using the T.38 protocol was tested successfully.  However since the provider requires the MediaRelay and Exclusive-Coder setting, T.38 is not activated on the SIP-interface. The reason for this is the non-working fallback to AudioFax of the Fax-interface, in case that the destination does not support T.38. This limitation applies only to the Fax-interface. If you are not using it for fax calls, you can enable T.38 by using the "Expert Mode" at the SIP-profile.
Additionally transport of faxes to/from the PSTN using the T.38 protocol was tested successfully.  However since the provider requires the MediaRelay and Exclusive-Coder setting, T.38 is not activated on the SIP-interface. The reason for this is the non-working fallback to AudioFax of the Fax-interface, in case that the SIP-interface is configured with above options. This limitation applies only to the Fax-interface. If you are not using it for fax calls, you can enable T.38 by using the "Expert Mode" at the SIP-profile.

Latest revision as of 12:22, 22 September 2017

Additionally transport of faxes to/from the PSTN using the T.38 protocol was tested successfully. However since the provider requires the MediaRelay and Exclusive-Coder setting, T.38 is not activated on the SIP-interface. The reason for this is the non-working fallback to AudioFax of the Fax-interface, in case that the SIP-interface is configured with above options. This limitation applies only to the Fax-interface. If you are not using it for fax calls, you can enable T.38 by using the "Expert Mode" at the SIP-profile.