Reference9:Concept USB Headset: Difference between revisions
(replaced Part/Item No, by PN, Product Code by ID) |
|||
Line 30: | Line 30: | ||
Enabling the headset has the following effects: | Enabling the headset has the following effects: | ||
* a headset icon is displayed in the phone status line | * a headset icon is displayed in the phone status line | ||
* a normal inbound call is indicated by a ring tone in the headset (if this is supported by the headset) | * a normal inbound call is indicated by a ring tone in the headset (if this is supported by the headset) | ||
* an automatically connected inbound call ((announcement, broadcast) is connected to the headset (not to the speaker as usual) | * an automatically connected inbound call ((announcement, broadcast) is connected to the headset (not to the speaker as usual) | ||
Line 47: | Line 47: | ||
Some headsets require that all call control is performed by a ''Talk'' key, otherwise the media connection between base and headset gets lost. | Some headsets require that all call control is performed by a ''Talk'' key, otherwise the media connection between base and headset gets lost. | ||
Call control by a ''Talk'' key works only if the headset is known to the firmware! | Call control by a ''Talk'' key works only if the headset is known to the firmware! | ||
Before V9hotfix9 setting up outbound calls via a ''Talk'' key was disabled and had to be to be enabled via the WEB interface by checking "Phone/Preferences/Start Outbound Call on Electronic Hook Switch (EHS) Signal". This is obsolete now. | Before V9hotfix9 setting up outbound calls via a ''Talk'' key was disabled and had to be to be enabled via the WEB interface by checking "Phone/Preferences/Start Outbound Call on Electronic Hook Switch (EHS) Signal". This is obsolete now. | ||
Line 77: | Line 77: | ||
If the rules for a new headset can be defined in terms of such a description the variable KEYS0/DEV-HID can be created to provide the new description. | If the rules for a new headset can be defined in terms of such a description the variable KEYS0/DEV-HID can be created to provide the new description. | ||
This variable is read before the builtin descriptions and if a device is found there the builtin descriptions are ignored. | This variable is read before the builtin descriptions and if a device is found there the builtin descriptions are ignored. | ||
<code xml> | <code xml> | ||
Line 103: | Line 103: | ||
===Abbreviations=== | ===Abbreviations=== | ||
PN = Part Number as printed on the package (P/N: or PN: or Part No or ...) | |||
ID = USB procuct id as read from the device (idProduct) | |||
YES = feature tested and fully operational | YES = feature tested and fully operational | ||
NO = feature not supported by innovaphone | NO = feature not supported by innovaphone | ||
N/A = device does not provide functionality | N/A = device does not provide functionality | ||
===Jabra (GN Netcom)=== | ===Jabra (GN Netcom)=== | ||
Jabra Link 14201-30 ( | Jabra Link 14201-30 (ID 0x0925) connects the headsets DHSG ports with the USB interface of the telephone | ||
====wireless==== | ====wireless==== | ||
====='''GN 9350e ( | ====='''GN 9350e (PN 9356-607-401, ID 0x9350)'''===== | ||
{| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | {| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | ||
! align="center" style="background:#f0f0f0;"|'''Operation''' | ! align="center" style="background:#f0f0f0;"|'''Operation''' | ||
Line 126: | Line 131: | ||
! align="center" style="background:#f0f0f0;" colspan="3" |Jabra Link 14201-30 to DHSG port | ! align="center" style="background:#f0f0f0;" colspan="3" |Jabra Link 14201-30 to DHSG port | ||
! align="center" style="background:#f0f0f0;" colspan="3" |directly to USB | ! align="center" style="background:#f0f0f0;" colspan="3" |directly to USB | ||
|- | |- | ||
| Open phone line on target phone | | Open phone line on target phone | ||
| style="text-align:center" | YES | | style="text-align:center" | YES | ||
Line 165: | Line 170: | ||
====='''Pro 9450'''===== | ====='''Pro 9450'''===== | ||
Pro 9450 ( | Pro 9450 (PN 9450-25-507-101, ID 0x1021)<br> | ||
Pro 9450 Duo EMA ( | Pro 9450 Duo EMA (PN 9450-29-707-101, ID 0x1022)<br> | ||
(since V9hotfix12)<br/> | (since V9hotfix12)<br/> | ||
{| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | {| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | ||
Line 248: | Line 253: | ||
<br/> | <br/> | ||
====='''Pro 9460 ( | ====='''Pro 9460 (PN 9460-25-707-101, ID 0x1041)'''===== | ||
(since V9hotfix12)<br/> | (since V9hotfix12)<br/> | ||
{| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | {| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | ||
Line 330: | Line 335: | ||
<br/> | <br/> | ||
====='''Pro 9470 ( | ====='''Pro 9470 (PN 9470-26-904-101, ID 0x1042)'''===== | ||
(since V9hotfix12)<br/> | (since V9hotfix12)<br/> | ||
{| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | {| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | ||
Line 412: | Line 417: | ||
<br/> | <br/> | ||
====='''GO 6470 ( | ====='''GO 6470 (PN 6470-15-207-501, ID 0x1003,0x1004, Firmware 4.5.17)'''===== | ||
(since V9hotfix12)<br/> | (since V9hotfix12)<br/> | ||
{| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | {| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | ||
Line 494: | Line 499: | ||
<br/> | <br/> | ||
====='''Pro 920 ( | ====='''Pro 920 (PN 920-25-508-1)'''===== | ||
connected with '''Jabra Link 14201-30''' to '''DHSG''' port<br/> | connected with '''Jabra Link 14201-30''' to '''DHSG''' port<br/> | ||
{| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | {| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | ||
Line 529: | Line 534: | ||
|} | |} | ||
<br/> | <br/> | ||
====='''Pro 930 ( | ====='''Pro 930 (PN 930-25-509-101, ID 0x1016, 0x1017)'''===== | ||
( | (ID 0x1016 since V9hotfix12, ID 0x1017 since V9hotfix24)<br/> | ||
{| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | {| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | ||
! align="center" style="background:#f0f0f0;"|'''Operation''' | ! align="center" style="background:#f0f0f0;"|'''Operation''' | ||
Line 575: | Line 580: | ||
<br/> | <br/> | ||
====='''GO 660 ( | ====='''GO 660 (PN 5078-228-209, ID 0x0320)'''===== | ||
The Jabra GO 660 Bluetooth headset system consists of the Jabra EXTREME™ headset<br/> | The Jabra GO 660 Bluetooth headset system consists of the Jabra EXTREME™ headset<br/> | ||
and the Jabra LINK 320 USB Bluetooth adapter.<br/> | and the Jabra LINK 320 USB Bluetooth adapter.<br/> | ||
Line 616: | Line 621: | ||
====='''SUPREME UC / MOTION UC'''===== | ====='''SUPREME UC / MOTION UC'''===== | ||
SUPREME UC ( | SUPREME UC (PN 5078-230-310)<br/> | ||
The Jabra SUPREME UC Bluetooth headset system consists of the Jabra SUPREME™ headset (tested firmware version 2.5.2)<br/> | The Jabra SUPREME UC Bluetooth headset system consists of the Jabra SUPREME™ headset (tested firmware version 2.5.2)<br/> | ||
and the Jabra LINK 360 USB Bluetooth adapter, | and the Jabra LINK 360 USB Bluetooth adapter, ID 0xa346.<br/> | ||
MOTION UC ( | MOTION UC (PN 6640-906-140)<br/> | ||
The Jabra MOTION UC Bluetooth headset system consists of the Jabra MOTION headset (tested firmware version 1.36.2)<br/> | The Jabra MOTION UC Bluetooth headset system consists of the Jabra MOTION headset (tested firmware version 1.36.2)<br/> | ||
and the Jabra LINK 360 USB Bluetooth adapter, | and the Jabra LINK 360 USB Bluetooth adapter, ID 0xa346 (tested firmware version 1.14.0).<br/> | ||
(since V9hotfix13)<br/> | (since V9hotfix13)<br/> | ||
Line 664: | Line 669: | ||
<br/> | <br/> | ||
====='''GO 6430 ( | ====='''GO 6430 (PN 6430-17-20-201, ID 0xa342, Firmware 5.4.17)'''===== | ||
The Jabra GO 6430 Bluetooth headset system consists of the Jabra GO 6430 headset<br/> | The Jabra GO 6430 Bluetooth headset system consists of the Jabra GO 6430 headset<br/> | ||
and the Jabra LINK 350 USB Bluetooth adapter.<br/> | and the Jabra LINK 350 USB Bluetooth adapter.<br/> | ||
Line 719: | Line 724: | ||
====corded==== | ====corded==== | ||
====='''BIZ 2400 USB'''===== | ====='''BIZ 2400 USB'''===== | ||
BIZ 2400 USB Mono ( | BIZ 2400 USB Mono (PN 2496-829-104, ID 0x2400) <br/> | ||
BIZ 2400 MS USB Mono ( | BIZ 2400 MS USB Mono (PN 2496-823-104, ID 0x2401) <br/> | ||
BIZ 2400 USB Duo ( | BIZ 2400 USB Duo (PN 2499-829-104, ID 0x91c) <br/> | ||
BIZ 2400 USB OC ( | BIZ 2400 USB OC (PN 2499-823-104, ID 0x090a) <br/> | ||
{| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | {| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | ||
Line 752: | Line 757: | ||
<br/> | <br/> | ||
====='''LINK 280 ( | ====='''LINK 280 (PN 280-09, ID 0x0910)'''===== | ||
{| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | {| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | ||
! align="center" style="background:#f0f0f0;"|'''Operation''' | ! align="center" style="background:#f0f0f0;"|'''Operation''' | ||
Line 781: | Line 786: | ||
<br/> | <br/> | ||
====='''Jabra SPEAK 410 / 510'''===== | ====='''Jabra SPEAK 410 / 510'''===== | ||
Jabra SPEAK 510 UC ( | Jabra SPEAK 510 UC (PN 7510-209, ID 0x0410,0x0412) <br/> | ||
(since V9hotfix24) <br/> | (since V9hotfix24) <br/> | ||
Jabra Speak 510 mit Bluetooth Dongle Link 360 ( | Jabra Speak 510 mit Bluetooth Dongle Link 360 (PN 7510-409 - "refer info from partner")<br/> | ||
Jabra SPEAK 410 ( | Jabra SPEAK 410 (PN 7410-209, ID 0x0420) <br/> | ||
{| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | {| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | ||
! align="center" style="background:#f0f0f0;"|'''Operation''' | ! align="center" style="background:#f0f0f0;"|'''Operation''' | ||
Line 814: | Line 819: | ||
====='''Jabra UC VOICE 550 / 750'''===== | ====='''Jabra UC VOICE 550 / 750'''===== | ||
Jabra UC VOICE 750 MS Duo ( | Jabra UC VOICE 750 MS Duo (PN 7599-823-109, ID 0x0752) <br/> | ||
(since V9hotfix24) <br/> | (since V9hotfix24) <br/> | ||
Jabra UC VOICE 550 Duo ( | Jabra UC VOICE 550 Duo (PN 5599-829-209, ID 0x0030) <br/> | ||
Jabra UC VOICE 550 Mono ( | Jabra UC VOICE 550 Mono (PN 5593-829-209, ID 0x0031) <br/> | ||
(since V9hotfix12) <br/> | (since V9hotfix12) <br/> | ||
{| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | {| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | ||
Line 848: | Line 853: | ||
===Plantronics=== | ===Plantronics=== | ||
Plantronics APU-70 ( | Plantronics APU-70 (PN 83 018-01, USB ID 0x0410) connects the EHS port at headset base with the USB port of the telephone | ||
====wireless==== | ====wireless==== | ||
====='''Voyager PRO UC / Legend UC'''===== | ====='''Voyager PRO UC / Legend UC'''===== | ||
Voyager Legend UC ( | Voyager Legend UC (PN 87670-02) <br/> | ||
(since V9hotfix24) <br/> | (since V9hotfix24) <br/> | ||
Voyager PRO UC v2 ( | Voyager PRO UC v2 (PN 38885-02) <br/> | ||
Open phone line on target phone from headset supported since V9hotfix24 <br/> | Open phone line on target phone from headset supported since V9hotfix24 <br/> | ||
{| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | {| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | ||
Line 906: | Line 911: | ||
====='''Savi W430'''===== | ====='''Savi W430'''===== | ||
Headset connected via Plantronics D100 USB/Bluetooth adapter ( | Headset connected via Plantronics D100 USB/Bluetooth adapter (ID 0xab01)<br/> | ||
(since V9hotfix12) <br/> | (since V9hotfix12) <br/> | ||
Attention! Since V9hotfix23 only D100 adapters with a firmware Version greater or equal 0118 will work correctly. <br/> | Attention! Since V9hotfix23 only D100 adapters with a firmware Version greater or equal 0118 will work correctly. <br/> | ||
In case of problems use Plantronics Update Manager to update your D100 adapters to the latest firmware version. <br/> | In case of problems use Plantronics Update Manager to update your D100 adapters to the latest firmware version. <br/> | ||
{| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | {| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | ||
! align="center" style="background:#f0f0f0;"|'''Operation''' | ! align="center" style="background:#f0f0f0;"|'''Operation''' | ||
Line 949: | Line 954: | ||
<br/> | <br/> | ||
====='''Savi W440A ( | ====='''Savi W440A (PN 83359-02)'''===== | ||
Headset connected via Plantronics D100 USB/Bluetooth adapter ( | Headset connected via Plantronics D100 USB/Bluetooth adapter (ID 0xab01)<br/> | ||
Attention! Since V9hotfix23 only D100 adapters with a firmware Version greater or equal 0118 will work correctly. <br/> | Attention! Since V9hotfix23 only D100 adapters with a firmware Version greater or equal 0118 will work correctly. <br/> | ||
In case of problems use Plantronics Update Manager to update your D100 adapters to the latest firmware version. <br/> | In case of problems use Plantronics Update Manager to update your D100 adapters to the latest firmware version. <br/> | ||
{| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | {| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | ||
! align="center" style="background:#f0f0f0;"|'''Operation''' | ! align="center" style="background:#f0f0f0;"|'''Operation''' | ||
Line 993: | Line 998: | ||
====='''Savi 740 / 745'''===== | ====='''Savi 740 / 745'''===== | ||
Savi 740 ( | Savi 740 (PN 83542-12, ID 0xac01)<br> | ||
Savi 745 ( | Savi 745 (PN 86507-03, ID 0xac01)<br> | ||
(since V9hotfix14)<br/> | (since V9hotfix14)<br/> | ||
{| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | {| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | ||
Line 1,062: | Line 1,067: | ||
<br/> | <br/> | ||
====='''Calisto 620 ( | ====='''Calisto 620 (PN 86700-02)'''===== | ||
{| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | {| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | ||
! align="center" style="background:#f0f0f0;"|'''Operation''' | ! align="center" style="background:#f0f0f0;"|'''Operation''' | ||
Line 1,092: | Line 1,097: | ||
<br/> | <br/> | ||
====='''Calisto P835 ( | ====='''Calisto P835 (PN 85335-03)'''===== | ||
{| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | {| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | ||
! align="center" style="background:#f0f0f0;"|'''Operation''' | ! align="center" style="background:#f0f0f0;"|'''Operation''' | ||
Line 1,134: | Line 1,139: | ||
====corded==== | ====corded==== | ||
====='''DA 45 / DA45 with EncorePro HW301N'''===== | ====='''DA 45 / DA45 with EncorePro HW301N'''===== | ||
DA 45 | DA 45 PN 77559-42 ID 0xaa05<br/> | ||
(DA45 Firmware Version 90 supported since V9hotfix24) | (DA45 Firmware Version 90 supported since V9hotfix24) | ||
{| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | {| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | ||
Line 1,170: | Line 1,175: | ||
====='''Blackwire C320 / C520'''===== | ====='''Blackwire C320 / C520'''===== | ||
Blackwire C320 ( | Blackwire C320 (PN 85619-02, ID 0xc00f)<br/> | ||
(since V9hotfix23)<br/> | (since V9hotfix23)<br/> | ||
Blackwire C520 ( | Blackwire C520 (PN 88861-01, ID 0xc017)<br/> | ||
(since V9hotfix24)<br/> | (since V9hotfix24)<br/> | ||
{| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | {| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | ||
Line 1,207: | Line 1,212: | ||
<br/> | <br/> | ||
====='''Blackwire C420 ( | ====='''Blackwire C420 (PN 82632-05 ID 0xaa14)'''===== | ||
(since V9hotfix24) | (since V9hotfix24) | ||
{| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | {| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | ||
! align="center" style="background:#f0f0f0;"|'''Operation''' | ! align="center" style="background:#f0f0f0;"|'''Operation''' | ||
Line 1,242: | Line 1,247: | ||
<br/> | <br/> | ||
====='''Blackwire C435 ( | ====='''Blackwire C435 (PN 85800-05, ID 0xaa12)'''===== | ||
(since V9hotfix12) <br/> | (since V9hotfix12) <br/> | ||
{| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | {| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | ||
Line 1,271: | Line 1,276: | ||
|} | |} | ||
<br/> | <br/> | ||
====='''Blackwire C620 ( | ====='''Blackwire C620 (PN 81965-42 ID 0xaa00)'''===== | ||
(since V9hotfix24) | (since V9hotfix24) | ||
{| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | {| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | ||
! align="center" style="background:#f0f0f0;"|'''Operation''' | ! align="center" style="background:#f0f0f0;"|'''Operation''' | ||
Line 1,306: | Line 1,311: | ||
<br/> | <br/> | ||
====='''Blackwire C720 ( | ====='''Blackwire C720 (PN 87670-02, ID 0x010a)'''===== | ||
(since V9hotfix23) <br/> | (since V9hotfix23) <br/> | ||
{| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | {| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | ||
Line 1,336: | Line 1,341: | ||
<br/> | <br/> | ||
====='''Calisto P420 USB SPEAKERPHONE ( | ====='''Calisto P420 USB SPEAKERPHONE (PN 82136-02 ID 0xd101)'''===== | ||
(since V9hotfix12) <br/> | (since V9hotfix12) <br/> | ||
{| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | {| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | ||
Line 1,370: | Line 1,375: | ||
===Sennheiser=== | ===Sennheiser=== | ||
Sennheiser CEHS-CI 02 (Prod. Code 504533, | Sennheiser CEHS-CI 02 (Prod. Code 504533, ID 0x0925) connects EHS port at headset base with the USB port of the telephone | ||
====wireless==== | ====wireless==== | ||
====='''DW Office (Article 504300, | ====='''DW Office (Article 504300, ID 0x740a)'''===== | ||
(since V9hotfix13)<br/> | (since V9hotfix13)<br/> | ||
{| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | {| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | ||
Line 1,460: | Line 1,465: | ||
====corded==== | ====corded==== | ||
====='''UUSB8 (Art. no. 504004, | ====='''UUSB8 (Art. no. 504004, ID 0x0008)'''===== | ||
(since V9hotfix13)<br/> | (since V9hotfix13)<br/> | ||
{| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | {| border="1" cellspacing="0" cellpadding="10" style="border-collapse:collapse" | ||
Line 1,507: | Line 1,512: | ||
But if the signature (vendor/product) of the headset is unknown to the firmware the call control functions | But if the signature (vendor/product) of the headset is unknown to the firmware the call control functions | ||
of the headset are without effect. Unsupported corded headsets may be used then as plain audio devices where | of the headset are without effect. Unsupported corded headsets may be used then as plain audio devices where | ||
call control is solely performed by the phone but wireless headsets usually will not work this way. | call control is solely performed by the phone but wireless headsets usually will not work this way. | ||
If adviced so by support or by the manufacturer such an unsupported headset can be mapped to a supported headset | If adviced so by support or by the manufacturer such an unsupported headset can be mapped to a supported headset | ||
of similar properties. | of similar properties. | ||
vars create KEYS0/HID-MAP p <map>[,<map>]... | vars create KEYS0/HID-MAP p <map>[,<map>]... | ||
maps the new signature to an existing one. '''<map>''' format is | maps the new signature to an existing one. '''<map>''' format is | ||
Line 1,520: | Line 1,525: | ||
The second '''manufacturer:product''' tuple is the signature of an already supported headset, | The second '''manufacturer:product''' tuple is the signature of an already supported headset, | ||
''manufacturer'' and ''product'' are plain 4 digit hex numbers without a "0x" prefix. | ''manufacturer'' and ''product'' are plain 4 digit hex numbers without a "0x" prefix. | ||
More maps can be specified separated by a comma. | More maps can be specified separated by a comma. | ||
<br/> | <br/> | ||
If there is for example a new Jabra headset with a | If there is for example a new Jabra headset with a ID 0xa34a which is very similar to the ''Jabra SUPREME UC'' the map would be | ||
vars create KEYS0/HID-MAP p 0b0e:a34a=0b0e:a346 | vars create KEYS0/HID-MAP p 0b0e:a34a=0b0e:a346 | ||
where ''0b0e'' ist the Jabra | where ''0b0e'' ist the Jabra ManufacturerId and a346 is the ID of ''Jabra SUPREME UC'' |
Revision as of 10:23, 30 August 2013
The IP222 and IP232 telephones provide USB ports. This document describes how to install, configure and use USB headsets on these phones.
Applies To
This information applies to
- IP222 and IP232
Firmware V9hotfix7 and later.
USB Headset Support is in beta as of V9hotfix7 and should thus not be used in production environments!
Note: USB Headsets supported by the innovaphone SoftwarePhone can be found here.
More Information
Disclaimer
Only the devices listed here has been tested or will be tested by innovaphone AG, therefore only these headsets are supported by us. But nevertheless you could not be sure, every device with the same label or the same part number will work in the same way, because of different product codes or modified firmware. So it is recommended to test the headset before buying.
It is also a good idea, to install the software attached to the headset on the PC and first connect the device to the PC to update the firmware and to pick out the specifications before using the headset with the phone.
Installation
Follow the vendor setup directions for using the headset with a PC but connect the USB plug of the headset to an USB slot of the IP2x2 phone. There is no need to install any vendor provided PC software.
Some headsets are designed to be connected both to a telephone via DHSG, AEI or a similar protocol and to a PC via USB. In this case you must also set up the headset for use with a PC, sometimes a special keypress is required to fix this setting.
Configuration
An USB headset is detected and automatically enabled as soon as it is connected to one of the phones a USB ports.
Enabling the headset has the following effects:
- a headset icon is displayed in the phone status line
- a normal inbound call is indicated by a ring tone in the headset (if this is supported by the headset)
- an automatically connected inbound call ((announcement, broadcast) is connected to the headset (not to the speaker as usual)
- a call initiated by pressing the Redial key while browsing a call list or a directory is connected to the headset
- a call initiated by pressing the Redial in indirect dialling mode is connected to the headset
Before V9hotfix9 it's was necessary to enable the headset explicitely at the telephone either by setting "Menu/Phone Setup/Headset: On" or by a Headset function key with Mode: Enable. This is obsolete now.
Call control
The IP2x2 telephones don't provide a hardware key to control the headset but if required a Headset function key with Mode: Control can be defined to setup/accept calls via headset directly on the telephone. Headset call control can be performed in different ways:
- by the Talk key on the headsets base station
- by the Talk key on the headset itself
- by the Headset:Control function key
- by the Redial key (outbound calls only)
Some headsets require that all call control is performed by a Talk key, otherwise the media connection between base and headset gets lost. Call control by a Talk key works only if the headset is known to the firmware!
Before V9hotfix9 setting up outbound calls via a Talk key was disabled and had to be to be enabled via the WEB interface by checking "Phone/Preferences/Start Outbound Call on Electronic Hook Switch (EHS) Signal". This is obsolete now.
Outbound Calls
- enter a number and press Redial
- select an entry in a call list or a directory and press Redial
- press a Talk key and enter the number (if this function is enabled)
- press the Headset:Control function key and enter the number
To drop the call press a Talk key, the Disconnect key or the Headset:Control function key.
Inbound Calls
To accept an inbound call press a Talk key or the Headset:Control function key. To drop the call press a Talk key, the Disconnect or the the Headset:Control function key.
Volume control
Usually the headset provides it's own volume control and this should be preferred. The phone volume control can be used when the range of the headset volume control is not sufficient.
Microphone Mute
Usually the headset provides it's own Mute button and this should be preferred.
Known Problems
Monitor Mode does not work with USB headsets, i.e. the telephone speaker cannot switched on in addition to the headset.
Supported Headsets
Abbreviations
PN = Part Number as printed on the package (P/N: or PN: or Part No or ...)
ID = USB procuct id as read from the device (idProduct)
YES = feature tested and fully operational
NO = feature not supported by innovaphone
N/A = device does not provide functionality
Jabra (GN Netcom)
Jabra Link 14201-30 (ID 0x0925) connects the headsets DHSG ports with the USB interface of the telephone
wireless
GN 9350e (PN 9356-607-401, ID 0x9350)
Operation | Phone | Headset | Base | Phone | Headset | Base |
---|---|---|---|---|---|---|
connected | Jabra Link 14201-30 to DHSG port | directly to USB | ||||
Open phone line on target phone | YES | NO | YES | NO1 | YES | YES |
Answer incoming call | YES | YES | YES | NO1 | YES | YES |
End current call | YES | YES | YES | NO1 | YES | YES |
Volume | YES | YES | YES | YES | YES | YES |
NO1The media channel between base and headset can be activated/deactivated only by the headset or the base but not by the phone
End of Sales 30.06.2013, End of Life 30.06.2015 for EMEA und APAC
Pro 9450
Pro 9450 (PN 9450-25-507-101, ID 0x1021)
Pro 9450 Duo EMA (PN 9450-29-707-101, ID 0x1022)
(since V9hotfix12)
Operation | Phone | Headset | Base | Phone | Headset | Base |
---|---|---|---|---|---|---|
connected | Jabra Link 14201-30 to DHSG port | directly to USB | ||||
Open phone line on target phone | YES | YES | YES | YES | YES | YES |
Answer incoming call | YES | YES | YES | YES | YES | YES |
End current call | YES | YES | YES | YES | YES | YES |
Volume | YES | YES | N/A | YES | YES | N/A |
Mute | YES | YES | YES | YES | YES | YES |
Put current call on hold, and accept incoming call | YES | N/A 5 | N/A 5 | YES | YES 2 | YES 2 |
Reject incoming call | YES | N/A 4 | N/A 4 | YES | YES 1 | YES 1 |
Call last number dialed (mobile phones and supported softphones only) |
YES | N/A 5 | N/A 7 | YES | YES 2 | N/A 7 |
Pro 9460 (PN 9460-25-707-101, ID 0x1041)
(since V9hotfix12)
Operation | Phone | Headset | Base | Phone | Headset | Base |
---|---|---|---|---|---|---|
connected | Jabra Link 14201-30 to DHSG port | directly to USB | ||||
Open phone line on target phone | YES | YES | YES | YES | YES | YES |
Answer incoming call | YES | YES | YES | YES | YES | YES |
End current call | YES | YES | YES | YES | YES | YES |
Volume | YES | YES | YES | YES | YES | YES |
Mute | YES | YES | YES | YES | YES | YES |
Put current call on hold, and accept incoming call | YES | N/A 5 | N/A 7 | YES | YES 2 | YES |
Reject incoming call | YES | N/A 4 | N/A 6 | YES | YES 1 | YES 3 |
Call last number dialed (mobile phones and supported softphones only) |
YES | N/A 5 | N/A 7 | YES | YES 1 | N/A 7 |
Pro 9470 (PN 9470-26-904-101, ID 0x1042)
(since V9hotfix12)
Operation | Phone | Headset | Base | Phone | Headset | Base |
---|---|---|---|---|---|---|
connected | Jabra Link 14201-30 to DHSG port | directly to USB | ||||
Open phone line on target phone | YES | YES | YES | YES | YES | YES |
Answer incoming call | YES | YES | YES | YES | YES | YES |
End current call | YES | YES | YES | YES | YES | YES |
Volume | YES | YES | YES | YES | YES | YES |
Mute | YES | YES | YES | YES | YES | YES |
Put current call on hold, and accept incoming call | YES | N/A 5 | N/A 7 | YES | YES 2 | YES |
Reject incoming call | YES | N/A 4 | N/A 6 | YES | YES 1 | YES 3 |
Call last number dialed (mobile phones and supported softphones only) |
YES | N/A 5 | N/A 7 | YES | YES 1 | N/A 7 |
GO 6470 (PN 6470-15-207-501, ID 0x1003,0x1004, Firmware 4.5.17)
(since V9hotfix12)
Operation | Phone | Headset | Base | Phone | Headset | Base |
---|---|---|---|---|---|---|
connected | Jabra Link 14201-30 to DHSG port | directly to USB | ||||
Open phone line on target phone | YES | YES | YES | YES | YES | YES |
Answer incoming call | YES | YES | YES | YES | YES | YES |
End current call | YES | YES | YES | YES | YES | YES |
Volume | YES | YES | YES | YES | YES | YES |
Mute | YES | YES | YES | YES | YES | YES |
Put current call on hold, and accept incoming call | YES | N/A 5 | N/A 7 | YES | YES 2 | YES |
Reject incoming call | YES | N/A 4 | N/A 6 | YES | YES 1 | YES 3 |
Call last number dialed (mobile phones and supported softphones only) |
YES | N/A 5 | N/A 7 | YES | YES 1 | N/A 7 |
Pro 920 (PN 920-25-508-1)
connected with Jabra Link 14201-30 to DHSG port
Operation | Phone | Headset | Base |
---|---|---|---|
Open phone line on target phone | YES | YES | N/A |
Answer incoming call | YES | YES | N/A |
End current call | YES | YES | N/A |
Volume | YES | YES | N/A |
Mute | YES | YES | N/A |
Pro 930 (PN 930-25-509-101, ID 0x1016, 0x1017)
(ID 0x1016 since V9hotfix12, ID 0x1017 since V9hotfix24)
Operation | Phone | Headset | Base |
---|---|---|---|
Open phone line on target phone | YES | YES | N/A |
Answer incoming call | YES | YES | N/A |
End current call | YES | YES | N/A |
Volume | YES | YES | N/A |
Mute | YES | YES | N/A |
Put current call on hold, and accept incoming call | YES | YES 2 | N/A |
Reject incoming call | YES | YES 1 | N/A |
GO 660 (PN 5078-228-209, ID 0x0320)
The Jabra GO 660 Bluetooth headset system consists of the Jabra EXTREME™ headset
and the Jabra LINK 320 USB Bluetooth adapter.
(since V9hotfix12)
Operation | Phone | Headset |
---|---|---|
Open phone line on target phone | YES | YES |
Answer incoming call | YES | YES |
End current call | YES | YES |
Volume | YES | YES |
Mute | YES | YES |
Put current call on hold, and accept incoming call | YES | N/A 5 |
Reject incoming call | YES | YES 1 |
SUPREME UC / MOTION UC
SUPREME UC (PN 5078-230-310)
The Jabra SUPREME UC Bluetooth headset system consists of the Jabra SUPREME™ headset (tested firmware version 2.5.2)
and the Jabra LINK 360 USB Bluetooth adapter, ID 0xa346.
MOTION UC (PN 6640-906-140)
The Jabra MOTION UC Bluetooth headset system consists of the Jabra MOTION headset (tested firmware version 1.36.2)
and the Jabra LINK 360 USB Bluetooth adapter, ID 0xa346 (tested firmware version 1.14.0).
(since V9hotfix13)
Operation | Phone | Headset |
---|---|---|
Open phone line on target phone | YES | N/A |
Answer incoming call | YES | YES |
End current call | YES | YES |
Volume | YES | YES |
Mute | YES | YES |
Put current call on hold, and accept incoming call | YES | YES2 |
Reject incoming call | YES | YES1 |
Redial last number dialled | YES | YES1 |
GO 6430 (PN 6430-17-20-201, ID 0xa342, Firmware 5.4.17)
The Jabra GO 6430 Bluetooth headset system consists of the Jabra GO 6430 headset
and the Jabra LINK 350 USB Bluetooth adapter.
(since V9hotfix13)
Operation | Phone | Headset |
---|---|---|
Open phone line on target phone | YES | YES |
Answer incoming call | YES | YES |
End current call | YES | YES |
Volume | YES | YES |
Mute | YES | YES |
Put current call on hold, and accept incoming call | YES | YES2 |
Reject incoming call | YES | YES1 |
Redial last number dialled | YES | YES1 |
YES 1 Double Tap
YES 2 Press (hold 1-2 seconds)
YES 3 Touch Red Handset Icon
N/A 4 Double Tap - not supported by DHSG
N/A 5 Press (hold 1-2 seconds) - not supported by DHSG
N/A 6 Not transfered to the Phone
N/A 7 Not available via Touch Screen Menu
corded
BIZ 2400 USB
BIZ 2400 USB Mono (PN 2496-829-104, ID 0x2400)
BIZ 2400 MS USB Mono (PN 2496-823-104, ID 0x2401)
BIZ 2400 USB Duo (PN 2499-829-104, ID 0x91c)
BIZ 2400 USB OC (PN 2499-823-104, ID 0x090a)
Operation | Phone | Headset |
---|---|---|
Open phone line on target phone | YES | YES |
Answer incoming call | YES | YES |
End current call | YES | YES |
Volume | YES | YES |
Mute | YES | YES |
LINK 280 (PN 280-09, ID 0x0910)
Operation | Phone | Headset |
---|---|---|
Open phone line on target phone | YES | YES |
Answer incoming call | YES | YES |
End current call | YES | YES |
Volume | YES | YES |
Mute | YES | YES |
Jabra SPEAK 410 / 510
Jabra SPEAK 510 UC (PN 7510-209, ID 0x0410,0x0412)
(since V9hotfix24)
Jabra Speak 510 mit Bluetooth Dongle Link 360 (PN 7510-409 - "refer info from partner")
Jabra SPEAK 410 (PN 7410-209, ID 0x0420)
Operation | Phone | Headset |
---|---|---|
Open phone line on target phone | YES | YES |
Answer incoming call | YES | YES |
End current call | YES | YES |
Volume | YES | YES |
Mute | YES | YES |
Jabra UC VOICE 550 / 750
Jabra UC VOICE 750 MS Duo (PN 7599-823-109, ID 0x0752)
(since V9hotfix24)
Jabra UC VOICE 550 Duo (PN 5599-829-209, ID 0x0030)
Jabra UC VOICE 550 Mono (PN 5593-829-209, ID 0x0031)
(since V9hotfix12)
Operation | Phone | Headset |
---|---|---|
Open phone line on target phone | YES | YES |
Answer incoming call | YES | YES |
End current call | YES | YES |
Volume | YES | YES |
Mute | YES | YES |
Plantronics
Plantronics APU-70 (PN 83 018-01, USB ID 0x0410) connects the EHS port at headset base with the USB port of the telephone
wireless
Voyager PRO UC / Legend UC
Voyager Legend UC (PN 87670-02)
(since V9hotfix24)
Voyager PRO UC v2 (PN 38885-02)
Open phone line on target phone from headset supported since V9hotfix24
Operation | Phone | Headset | Base |
---|---|---|---|
Open phone line on target phone | YES | YES | N/A |
Answer incoming call | YES | YES | N/A |
End current call | YES | YES | N/A |
Volume | YES | YES | N/A |
Mute | YES | YES | N/A |
Call back last call | YES | NO | N/A |
Initiate phones voice dialling | N/A | N/A | N/A |
Reconnect lost connection | N/A | not tested | N/A |
Savi W430
Headset connected via Plantronics D100 USB/Bluetooth adapter (ID 0xab01)
(since V9hotfix12)
Attention! Since V9hotfix23 only D100 adapters with a firmware Version greater or equal 0118 will work correctly.
In case of problems use Plantronics Update Manager to update your D100 adapters to the latest firmware version.
Operation | Phone | Headset | Base |
---|---|---|---|
Open phone line on target phone | YES | YES | N/A |
Answer incoming call | YES | YES | N/A |
End current call | YES | YES | N/A |
Volume | YES | YES | N/A |
Mute | YES | YES | N/A |
Flash between calls | YES | NO1 | N/A |
Savi W440A (PN 83359-02)
Headset connected via Plantronics D100 USB/Bluetooth adapter (ID 0xab01)
Attention! Since V9hotfix23 only D100 adapters with a firmware Version greater or equal 0118 will work correctly.
In case of problems use Plantronics Update Manager to update your D100 adapters to the latest firmware version.
Operation | Phone | Headset | Base |
---|---|---|---|
Open phone line on target phone | YES | YES | N/A |
Answer incoming call | YES | YES | N/A |
End current call | YES | YES | N/A |
Volume | YES | YES | N/A |
Mute | YES | YES | N/A |
Flash between calls | not tested | not tested | not tested |
Savi 740 / 745
Savi 740 (PN 83542-12, ID 0xac01)
Savi 745 (PN 86507-03, ID 0xac01)
(since V9hotfix14)
Operation | Phone | Headset | Base | Phone | Headset | Base |
---|---|---|---|---|---|---|
connected | Plantronics APU-70 to DHSG port | directly to USB | ||||
Open phone line on target phone | YES | YES | YES | YES | YES | YES |
Answer incoming call | YES | YES | YES | YES | YES | YES |
End current call | YES | YES | YES | YES | YES | YES |
Volume | YES | YES | N/A | YES | YES | N/A |
Mute | YES | YES | N/A | YES | YES | N/A |
Put current call on hold, and accept incoming call | YES | N/A 1 | N/A | YES | NO 2 | N/A |
N/A1 Press volume up or down at least 1,5 seconds (not supported by DHSG)
NO2 Press volume up or down at least 1,5 seconds (not passed to the phone)
Calisto 620 (PN 86700-02)
Operation | Phone | Speakerphone |
---|---|---|
Open phone line on target phone | YES | YES |
Answer incoming call | YES | YES |
End current call | YES | YES |
Volume | YES | YES |
Mute | YES | NO 1 |
NO1 Mute button present but did not work on tested sample
Calisto P835 (PN 85335-03)
Operation | Phone | Headset | Base |
---|---|---|---|
Open phone line on target phone | not tested | not tested | not tested |
Answer incoming call | not tested | not tested | not tested |
End current call | not tested | not tested | not tested |
Volume | not tested | not tested | not tested |
Mute | not tested | not tested | not tested |
Flash between calls | not tested | not tested | not tested |
corded
DA 45 / DA45 with EncorePro HW301N
DA 45 PN 77559-42 ID 0xaa05
(DA45 Firmware Version 90 supported since V9hotfix24)
Operation | Phone | Headset |
---|---|---|
Open phone line on target phone | YES | YES |
Answer incoming call | YES | YES |
End current call | YES | YES |
Volume | YES | YES |
Mute | YES | YES |
Flash between calls | YES | YES1 |
YES1 Long press on Talk button when there is a connected and a waiting call
Blackwire C320 / C520
Blackwire C320 (PN 85619-02, ID 0xc00f)
(since V9hotfix23)
Blackwire C520 (PN 88861-01, ID 0xc017)
(since V9hotfix24)
Operation | Phone | Headset |
---|---|---|
Open phone line on target phone | YES | YES |
Answer incoming call | YES | YES |
End current call | YES | YES |
Volume | YES | YES |
Mute | YES | YES |
Flash between calls | YES | YES1 |
YES1 Long press on Talk button when there is a connected and a waiting call
Blackwire C420 (PN 82632-05 ID 0xaa14)
(since V9hotfix24)
Operation | Phone | Headset |
---|---|---|
Open phone line on target phone | YES | YES |
Answer incoming call | YES | YES |
End current call | YES | YES |
Volume | YES | YES |
Mute | YES | YES |
Flash between calls | YES | YES1 |
YES1 Long press on Talk button when there is a connected and a waiting call
Blackwire C435 (PN 85800-05, ID 0xaa12)
(since V9hotfix12)
Operation | Phone | Headset |
---|---|---|
Open phone line on target phone | YES | YES |
Answer incoming call | YES | YES |
End current call | YES | YES |
Volume | YES | YES |
Mute | YES | YES |
Blackwire C620 (PN 81965-42 ID 0xaa00)
(since V9hotfix24)
Operation | Phone | Headset |
---|---|---|
Open phone line on target phone | YES | YES |
Answer incoming call | YES | YES |
End current call | YES | YES |
Volume | YES | YES |
Mute | YES | YES |
Flash between calls | YES | YES1 |
YES1 Long press on Talk button when there is a connected and a waiting call
Blackwire C720 (PN 87670-02, ID 0x010a)
(since V9hotfix23)
Operation | Phone | Headset |
---|---|---|
Open phone line on target phone | not tested | not tested |
Answer incoming call | not tested | not tested |
End current call | not tested | not tested |
Volume | not tested | not tested |
Mute | not tested | not tested |
Calisto P420 USB SPEAKERPHONE (PN 82136-02 ID 0xd101)
(since V9hotfix12)
Operation | Phone | Headset |
---|---|---|
Open phone line on target phone | YES | N/A |
Answer incoming call | YES | N/A |
End current call | YES | N/A |
Volume | YES | YES |
Mute | YES | YES |
Sennheiser
Sennheiser CEHS-CI 02 (Prod. Code 504533, ID 0x0925) connects EHS port at headset base with the USB port of the telephone
wireless
DW Office (Article 504300, ID 0x740a)
(since V9hotfix13)
Operation | Phone | Headset | Base | Phone | Headset | Base |
---|---|---|---|---|---|---|
connected | CEHS-CI 02 to EHS port | directly to USB | ||||
Open phone line on target phone | YES | YES | YES | YES | YES | YES |
Answer incoming call | YES | YES | YES | YES | YES | YES |
End current call | YES | YES | YES | YES | YES | YES |
Volume | YES | YES | N/A | YES | YES | N/A |
Mute | YES | YES | N/A | YES | YES | N/A |
Put current call on hold, and accept incoming call | YES | N/A | N/A | YES | YES 1 | N/A |
Reject incoming call | YES | N/A | N/A | YES | N/A | N/A |
Redial last number |
YES | N/A | N/A | YES | YES 2 | N/A |
YES1 Long press on Talk button when there is a connected and a waiting call
YES2 Long press on Talk button when phone is idle
corded
UUSB8 (Art. no. 504004, ID 0x0008)
(since V9hotfix13)
Operation | Phone | Headset |
---|---|---|
Open phone line on target phone | YES | YES |
Answer incoming call | YES | YES |
End current call | YES | YES |
Volume | YES | YES |
Mute | YES | YES |
Reject incoming call | YES | YES 1 |
Redial last number | YES | YES 2 |
YES1 Long press on Talk button when phone is ringing
YES2 Long press on Talk button when phone is idle
Unsupported Headsets
Sometimes new headsets are relased which are very similar to one of the already supported headsets. But if the signature (vendor/product) of the headset is unknown to the firmware the call control functions of the headset are without effect. Unsupported corded headsets may be used then as plain audio devices where call control is solely performed by the phone but wireless headsets usually will not work this way.
If adviced so by support or by the manufacturer such an unsupported headset can be mapped to a supported headset of similar properties.
vars create KEYS0/HID-MAP p <map>[,<map>]...
maps the new signature to an existing one. <map> format is
manufacturer:product=manufacturer:product
The second manufacturer:product tuple is the signature of an already supported headset,
manufacturer and product are plain 4 digit hex numbers without a "0x" prefix.
More maps can be specified separated by a comma.
If there is for example a new Jabra headset with a ID 0xa34a which is very similar to the Jabra SUPREME UC the map would be
vars create KEYS0/HID-MAP p 0b0e:a34a=0b0e:a346
where 0b0e ist the Jabra ManufacturerId and a346 is the ID of Jabra SUPREME UC