Howto:MXP T150 - Tandberg - H.323 Testreport

From innovaphone wiki
Revision as of 20:37, 22 November 2007 by Afi (talk | contribs) (→‎Call Forward)
Jump to navigation Jump to search

Version

Firmware Version:

L4.2, Sicherheit

Hardware Version:

38A00626

Device Setup

Tested feature Result
Register Device w/o specific configuration (requires DHCP, GK detection and “magic” alias) No
DHCP is default Yes
DHCP works Yes
DHCP yields timeserver and time displays correctly Yes
SNTP config has TZ string for timezone/dst autoconfig No
DHCP yields correct default gateway Yes
Device supports magic registration (e.g. by serial) No
GK discovery works Yes
Fixed GK registrations works No
Registrations supports GK-ID No
Device registers w/o Extension (just by name) Yes
Device registers by extension Yes
Device registers with H.235 password Yes, but no calls possible
Device registers multiple identities No
Device can configure IP address, GK attributes (gk-id, gk-ip, alias) from DHCP (vendor specific) N/A

Test Results

Basic Call

Tested feature Result
call using g711a Yes, oneway
call using g711u Yes, oneway
call using g723 No
call using g729 No
Overlapped sending No
early media channel No
Fax using T.38 N/A
CGPN can be supressed No
Reverse Media Negotiaton No
Voice Quality OK? Yes

Calls from T150 to IP230 have one way audio from IP230 to T150 only. Calls from IP230 to T150 are OK.

DTMF

Tested feature Result
DTMF tones sent correctly Yes
DTMF tones received correctly Yes
Device switches to DTMF mode automatically after connect Yes

Hold/Retrieve

Tested feature Result
Call can be put on hold Yes, but sometimes without MoH
Held end hears music on hold / announcement from PBX Yes
can put call on hold No
can create secondary outgoing call No
can accept a secondary incoming call No
can terminate either call and retrieve remaining call No
can toggle between both calls, media stream ok No
call can be held remotely and retrieved remotely, media stream ok Yes, but sometimes without MoH
signals call hold to GK No

Transfer with consultation

Tested feature Result
Device can be transferred by far end (check media ok, display on all 3 phones ok)
A calls T, A calls B, A xfers T to B OK, T shows number from A after transfer
A calls B, B calls T, A xfers B to T OK, T shows number from A after transfer
T calls A, B calls A, A xfers T to B NOK, transferred call without media
B calls A, T calls A, A xfers B to T OK, T shows number from A after transfer
Device can transfer both call ends (media ok, display on all 3 phones ok?).
T calls A, t calls B, t xfers A to B N/A
T calls B, t calls A, t xfers B to A N/A
A calls t, B calls t, t xfers A to B N/A
B calls t, A calls t, t xfers B to A N/A

Hints:

  • A - first innovaphone Terminal
  • B - second innovaphone Terminal
  • T - tested 3rd party Terminal

Blind Transfer

Tested feature Result
Device can be transferred by far end (check media ok, display on all 3 phones ok)
A calls T, A xfers T to B No, no media after transfer
A calls B, A xfers B to T No, transfer fails
T calls A, A xfers to B No, transfer fails
Device can transfer blindly (media ok, display on all 3 phones ok?).
T calls A, T xfers to B N/A
A calls T, T xfers to B N/A

Call Forward

Tested feature Result
Device displays current call forwarding (interrogation)
CFU No
CFNR No
CFB No
Device can set call forwarding No

Other Features

Directory

Tested feature Result
Device built-in directory
Exists
Can be dialled from
Does CLI resolution

Hands free

Tested feature Result
Loudspeaker operation works fine
Hands free works fine
Volume adjustable during call

Keys

Tested feature Result
Device has speed dial keys
Device has programmable function keys


Related Articles