Version
Firmware Version:
0.0.62
Hardware Version:
530v2
Certification Status
This product is being tested right now. The test is not yet completed.
Device Setup
Tested feature
|
Result
|
Register Device w/o specific configuration (requires DHCP)
|
No
|
DHCP is default
|
Yes
|
DHCP yields timeserver and time displays correctly
|
No
|
SNTP config has TZ string for timezone/dst autoconfig
|
No
|
DHCP yields correct default gateway
|
Yes
|
Device supports magic registration (e.g. by serial)
|
No
|
Fixed registrations works
|
Yes
|
Device registers w/o Extension (just by name)
|
Yes
|
Device registers by extension
|
No
|
Device registers with password
|
Yes
|
Device registers multiple identities
|
No
|
Device supports STUN protocol
|
No
|
Device sends NAT - keepalive messages
|
No
|
Device refreshes the PBX registration
|
Yes
|
Device supports SIP over TCP
|
No
|
Device supports SIPS (SIP over TLS)
|
No
|
Device supports HTTPS
|
No
|
Device supports VAD (Voice activity detection)
|
No
|
Test Results
Basic Call
Tested feature
|
Result
|
call using g711a
|
Yes
|
call using g711u
|
Yes
|
call using g729
|
No
|
Early media channel
|
No
|
Reverse Media Negotiaton
|
Yes
|
Device supports asymetric codec negotiation
|
No
|
Device supports codec renegotiation during a conversation
|
Yes
|
Voice Quality OK?
|
Yes
|
DTMF
Tested feature
|
Result
|
DTMF tones sent correctly
|
Yes
|
DTMF tones received correctly
|
Yes
|
Hold/Retrieve
Tested feature
|
Result
|
Device handles incoming hold (inactive) correctly
|
Yes
|
Device handles incoming hold (sendonly) correctly
|
Yes
|
Transfer with consultation
Tested feature
|
Voice Ok?
|
MoH Ok?
|
inno1 calls inno2. inno2 transfers to testphone.
|
Yes
|
Yes
|
inno1 calls inno2. inno1 transfers to testphone.
|
Yes
|
Yes
|
inno1 calls testphone. inno1 transfers to inno2.
|
Yes
|
Yes
|
inno1 calls testphone. testphone transfers to inno2.
|
N/A
|
N/A
|
testphone calls inno1. inno1 transfers to inno2.
|
Yes
|
Yes
|
testphone calls inno1. testphone transfers to inno2.
|
N/A
|
N/A
|
Transfer with consultation (alerting only)
Tested feature
|
Voice Ok?
|
MoH Ok?
|
inno1 calls inno2. inno2 transfers to testphone.
|
Yes
|
Yes
|
inno1 calls inno2. inno1 transfers to testphone.
|
Yes
|
Yes
|
inno1 calls testphone. inno1 transfers to inno2.
|
Yes
|
Yes
|
inno1 calls testphone. testphone transfers to inno2.
|
N/A
|
N/A
|
testphone calls inno1. inno1 transfers to inno2.
|
Yes
|
Yes
|
testphone calls inno1. testphone transfers to inno2.
|
N/A
|
N/A
|
Blind Transfer
Tested feature
|
Voice Ok?
|
inno1 calls inno2. inno2 transfers to testphone.
|
Yes
|
inno1 calls inno2. inno1 transfers to testphone.
|
No
|
inno1 calls testphone. inno1 transfers to inno2.
|
Yes
|
inno1 calls testphone. testphone transfers to inno2.
|
N/A
|
testphone calls inno1. inno1 transfers to inno2.
|
No
|
testphone calls inno1. testphone transfers to inno2.
|
N/A
|
Blind Transfer (alerting only)
Tested feature
|
Voice Ok?
|
inno1 calls inno2. inno2 transfers to testphone.
|
Yes
|
inno1 calls testphone. inno1 transfers to inno2.
|
N/A
|
inno1 calls testphone. testphone transfers to inno2.
|
N/A
|
testphone calls inno1. inno1 transfers to inno2.
|
Yes
|
testphone calls inno1. testphone transfers to inno2.
|
N/A
|
Broadcast Group & Waiting Queue
Tested feature
|
Result
|
testphone makes call to a Broadcast Group. inno1 picks up.
|
Yes
|
inno1 makes call to a Broadcast Group. testphone picks up.
|
Yes
|
testphone makes call to a Waiting Queue. inno1 picks up before announcement is played.
|
Yes
|
testphone makes call to a Waiting Queue. inno1 picks up after announcement is played.
|
Yes
|
inno1 makes call to a Waiting Queue. testphone picks up.
|
Yes
|
Other Features
Directory
Tested feature
|
Result
|
Device built-in directory exists?
|
No
|
Can be dialled from
|
No
|
Does CLI resolution
|
No
|
Hands free
Tested feature
|
Result
|
Loudspeaker operation works fine
|
Yes
|
Hands free works fine
|
Yes
|
Volume adjustable during call
|
No
|
Keys
Tested feature
|
Result
|
Device has speed dial keys
|
Yes
|
Device has programmable function keys
|
No
|
Known Problems
- timezone settings can not be received via DHCP
- Cat-cable is connected via screw terminals not via LSA Plus, installation is quite complicated and should only be done by qualified personal.